peth0: received packet with own address as source address

最新推荐文章于 2018-02-10 10:30:52 发布
最新推荐文章于 2018-02-10 10:30:52 发布
阅读量453 收藏
点赞数
CC 4.0 BY-SA版权
分类专栏： 技术 文章标签： Linux
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/iteye_19910/article/details/82068600
本文解析了Linux系统中出现特定网卡错误的原因，包括IP冲突和网卡硬件损坏等问题，并提供了解决步骤，如断开网线检查网卡状态及验证IP配置。

peth0: received packet with own address as source address
peth0: received packet with own address as source address
peth0: received packet with own address as source address
peth0: received packet with own address as source address

 

Linux出现以上错误原因如下

 

1,IP出突

2,网卡硬件损坏

 

解决办法,拨掉网线,查看网卡是否正常,检查IP是否有问题,逐个排除

【LEDE】树莓派上玩LEDE终极指南-69-br-lan: received packet on * with own address as source address
wang805447391的博客
07-26 1754
目前的解决方案： 1、开启STP协议 2、将br-lan的与其子网下的hwaddr改成不同的 这两种目前正在测试，效果未知。   ============== 2018.07.27 ============== 目前来看，好像管用！   root@OpenWrt:~# ifconfig br-lan Link encap:Ethernet HWaddr B8:27:EB...
xen中出现received packet with own address问题解决
qq_43668159的博客
01-24 1223
xen中出现received packet with own address问题解决
openwrt/LEDE打印信息: br-lan: received packet on eth0 with own address as source address
热门推荐
林永康的博客
02-10 1万+
openwrt/LEDE通过串口或者dmesg命令发现有很多报告信息如下:............[277.479000] br-lan: received packet on eth0 with own address as source address[280.482316] br-lan: received packet on eth0 with own address as source ...
received packet with own address as source address
weixin_30868855的博客
06-25 2187
故障现象：网卡做bond后，在messages中频繁出现received packet with own address as source address。问题分析：该问题由于网卡做bond后上层链路交换机没有做port channel而产生错误。比如网卡做bond mode 0，上层交换无任何配置，此时会认为做bond的两个物理网卡mac相同而产生报错。解决办法：bond使用mode 1模式...
br-lan: received packet on eth2.1 with own address as source address
wsclinux的专栏
05-06 7919
转自：http://blog.chinaunix.net/xmlrpc.php?r=blog/article&uid=27057175&id=4740299 路由器是OpenWRT系统的，接上网络后，一直出现这句告警， 但是不影响连通性。 首先看到这个是内核打印的，查了其他人的解释， 1. brctl stp intf on 2. 关闭ipv6 都试过了，无效！ 进入了一个误区，
CentOS :received packet with own address as source address 错误解决办法
四月的专栏
07-01 6890
笔者在使用CentOS过程中突然遇到鼠标不相应，reset重启后，一直停留在蓝屏，汗颜，这种情况多半是启动过程中有进程阻塞引起的。 于是，Ctrl+Alt +F1看究竟，发现屏幕上有不断报：received packet with own address as source address，消息，在网上找了找，没有具体方法，但是让我怀疑网络问题，于是，拔掉网线，重启。 OK，Cen
光栅和 PETH 简单版本：用于神经科学家和其他人的光栅​​和 PETH :)-matlab开发
05-30
event1=rand(100,1)*1000;%对于神经科学家来说，这是节点的时间戳； 事件 1=排序（事件 1）； event2=[event1+10+rand(100,1)*2;event1+10+rand(100,1)*4; event1+10+rand(100,1)*4; event1+100+rand(100,1)*10];...
严重性 代码 说明 项目 文件 行 禁止显示状态 错误 C4013 “sprintf”未定义；假设外部返回 int KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 39 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 75 错误 C2065 “ETH_HEADER”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 86 错误 C2065 “ethHeader”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 86 错误 C2065 “ETH_HEADER”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 86 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 86 错误 C2065 “ethHeader”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 89 错误 C2223 “->EtherType”的左侧必须指向结构/联合 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 89 错误 C4013 “htons”未定义；假设外部返回 int KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 89 错误 C2065 “ETH_P_ARP”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 89 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 90 错误 C2065 “ETH_HEADER”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 92 错误 C2065 “ethHeader”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 98 错误 C2065 “ARP_OPCODE_REPLY”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 105 错误 C4013 “htonl”未定义；假设外部返回 int KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 106 错误 C2065 “ethHeader”: 未声明的标识符 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 116 错误 C2223 “->SrcAddress”的左侧必须指向结构/联合 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 116 错误 C2168 “memcpy”: 内部函数的实参太少 KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 116 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 162 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 181 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 191 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 213 错误 C2059 语法错误:“)” KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 223
07-06
LOG_DEBUG("Received %d buffer lists (Flags: 0x%X)", NumberOfNetBufferLists, ReceiveFlags); while (currList) { PNET_BUFFER netBuffer = NET_BUFFER_LIST_FIRST_NB(currList); PMDL mdl = ...
yibufanzhuan_异步电机反转_异步电机_异步电机制动_peth6w_
10-01
异步电机，也称为感应电机，是工业应用中最为广泛的一种电动机。它的工作原理基于电磁感应，通过定子绕组中的交流电流产生旋转磁场，这个磁场与转子绕组中的感应电流相互作用，从而产生转矩驱动电机转动。...
MATLAB工具包：神经科学家的光栅与PETH数据分析
资源摘要信息:"本资源是为了帮助神经科学家和其他专业人士理解并使用光栅和PETH（Peri-Event Time Histogram，周期事件时间直方图）的概念，同时通过MATLAB语言开发来简化相关数据处理流程。光栅和PETH是神经科学...
严重性 代码 说明 项目 文件 行 禁止显示状态 错误 C4013 “NdisHtons”未定义；假设外部返回 int KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 119 错误 C4013 “NdisHtonl”未定义；假设外部返回 int KMDF Driver4 C:\Users\Administrator\source\repos\KMDF Driver4\KMDF Driver4\arp.c 136 要生成完整的源码，不要省略源码不要简化
最新发布
07-06
KdPrint(("[ARP-SPOOF] DEBUG: Received %d buffer lists (Flags: 0x%X)\n", NumberOfNetBufferLists, ReceiveFlags)); while (currList) { PNET_BUFFER netBuffer = NET_BUFFER_LIST_FIRST_NB(currList); ...
openwrt: br-lan: reveived packet on eth0 with own address as source address
bingyu的博客
03-07 9072
openwrt: br-lan: reveived packet on eth0 with own address as source address 出现以上问题时，导致lan口不通，或者时通时不通。 解决办法： 1. 修改br-lan的MAC地址： ifconfig eth0 down ifconfig eth0 hw ether 52:54:00:66:66:66 #设置
own address as source address
weixin_30826095的博客
10-13 797
1222.762730] br0: received packet on nbif0 with own address as source address[ 1222.769697] br0: received packet on nbif0 with own address as source address[ 1227.722399] net_ratelimit: 38515 ca...
peth0:received packet with own address as source address 如何解决？
独自陶醉
05-04 3680
新集成出来的系统，启动Xen内核，搭建eucalyputs环境过程中，终端屏幕自动打印出来：peth0:received packet with own address as source addresspeth0:received packet with own address as source addresspeth0:received packet with own address as source addresspeth0:received packet with own address as
vif0.0: received packet with own address as source address
大家都很努力
05-14 471
系统：Centos5.x 内核：2.6.18.x 命令行异常信息： vif0.0: received packet with own address as source address 也可dmesg查看系统信息 表现为机器不能联网 #查看网络配置 $ /sbin/ifconfig eth0 Link encap:Ethernet [color=red]HWad...
linux报错：vif0.0:+received+packet+with+own+address+as+source+address
weixin_30580943的博客
02-18 160
ALT+F7切换Linux界面 转载于:https://www.cnblogs.com/sunson/archive/2013/02/18/2915329.html
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值