QCOM debug ADC

最新推荐文章于 2023-10-26 19:09:01 发布
原创 最新推荐文章于 2023-10-26 19:09:01 发布 · 802 阅读 · 2 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。

本文介绍如何使用ADB shell从/sys/devices目录读取VADC通道节点的数据，并提供了两种不同的寄存器转储方法，一种针对VADC_BTM寄存器，另一种针对VADC_USR寄存器。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

QCOM debug ADC

Reading VADC channel nodes from the ADB shell

/sys/devices/platform/soc/200f000.qcom,spmi/spmi-0/spmi0-00/200f000.qcom,spmi:qcom,pm8953@0:vadc@3100 # cat aaapa_therm1                            
Result:34090 Raw:7cd7

Register dump using ADB shell

// VADC_BTM register dump
adb shell$
su
mount -t debugfs none /sys/kernel/debug
echo 0x3400 > /sys/kernel/debug/spmi/spmi-0/address
echo 0xe0 > /sys/kernel/debug/spmi/spmi-0/count
cat /sys/kernel/debug/spmi/spmi-0/data
// VADC_USR register dump
adb shell$
su
mount -t debugfs none /sys/kernel/debug
echo 0x3100 > /sys/kernel/debug/spmi/spmi-0/address
echo 0xe0 > /sys/kernel/debug/spmi/spmi-0/count
cat /sys/kernel/debug/spmi/spmi-0/data
【sdx62】通过代码直接修改控制gpio实例
wgl307293845的博客
05-01 556
控制gpio 方式一：通过dtsi 方式二：通过通用gpio子系统 内核查看gpio的状态/sys/kernel/debug/gpio gpiochip3: GPIOs 884-895, parent: platform/c440000.qcom,spmi:qcom,pm7250b@2:pinctrl@c000, c440000.qcom,spmi:qcom,pm7250b@2:pinctrl@c000: gpio1 : in low normal vin-0 pull-down 10u
高通SDX12：ADC驱动相关问题分析
不秃头的程序猿Gabriel的博客
09-04 449
高通SDX12 ADC驱动 thermal gpio
Qcom 平台 pmic adc读取代码实现
null
08-02 904
Kernel demo 参考代码： #include <linux/module.h> #include <linux/init.h> #include <linux/cdev.h> #include <linux/device.h> #include <linux/kernel.h> #include <asm/uaccess.h> #include <linux/of_gpio.h> #include <linu.
qcom kernel debug
chenglinpan1548的博客
05-16 222
adb shell mount -t debugfs debugfs sys/kernel/debug adb shell "echo -n 'file msm8952.c +p' > /sys/kernel/debug/dynamic_debug/control" ---- or ...
SPMI协议理解文档
10-18
SPMI协议理解文档，可以帮助快速理解SPMI，典型应用(Qcom PMIC/PMI)。
高通平台GPIO引脚复用指导
四儿家的小祖宗的博客
10-26 3747
该文档以SDX12平台为例，介绍如何对平台的GPIO PIN脚功能进行软件配置。
PM8909 MPP4脚作为外部ADC采用使用
cornerstone1的博客
01-14 1308
pm8909的adc内部架构如图所示（参考《80-nn174-58_b_pmic_adc_software_user_guide.pdf》）： MPP configuration就是在设备树里配置： pm8909_mpps: mpps { compatible = “qcom,qpnp-pin”; spmi-dev-container; gpio-controller; #gpio-cells = <2>; #address-cells = <1>; #size-cells =
QCom MSM平台显示屏Framebuffer设备注册过程
zirconsdu的专栏
05-29 5396
本文是Android Display部分分析的一部分，描述屏Framebuffer设备注册过程。 QC MSM7xxx/MSM8xxx平台本身就提供了很多接口的屏的支持，每种屏对应一个驱动文件。由于QC MSM平台显示驱动架构做了绝大部分的工作，驱动一块新的屏仅需要做很少量的工作。下面的过程是屏Framebuffer注册过程的分析。
Line 18: 01-01 19:26:37.692480 1 1 E [ 14.908805]is_fastboot_adb_enabled: is_debuggable|cta|allcommode|aging test version,ingore Line 137: 01-01 19:26:38.165411 132 132 I [ 15.381736]wcd937x_codec wcd937x-codec: wcd_mbhc_start: usbc analog enabled Line 139: 01-01 19:26:38.165581 132 132 E [ 15.381906]wcd_mbhc_start: usbc_insert_pin in dt node is missing Line 462: 01-01 19:26:41.245371 902 902 I [ 18.461696]servicemanager: Caller(pid=2254,uid=0,sid=u:r:usbd:s0) Could not find android.hardware.usb.gadget.IUsbGadget/default in the VINTF manifest. No alternative instances declared in VINTF. Line 462: 01-01 19:26:41.245371 902 902 I [ 18.461696]servicemanager: Caller(pid=2254,uid=0,sid=u:r:usbd:s0) Could not find android.hardware.usb.gadget.IUsbGadget/default in the VINTF manifest. No alternative instances declared in VINTF. Line 462: 01-01 19:26:41.245371 902 902 I [ 18.461696]servicemanager: Caller(pid=2254,uid=0,sid=u:r:usbd:s0) Could not find android.hardware.usb.gadget.IUsbGadget/default in the VINTF manifest. No alternative instances declared in VINTF. Line 471: 01-01 19:26:41.384214 1 1 I [ 18.600539]: setusbconfig toadb Line 471: 01-01 19:26:41.384214 1 1 I [ 18.600539]: setusbconfig toadb Line 474: 01-01 19:26:41.397404 1705 1705 I [ 18.613729]msm-usb-hsphy 1613000.hsphy: Avail curr from USB = 2 Line 474: 01-01 19:26:41.397404 1705 1705 I [ 18.613729]msm-usb-hsphy 1613000.hsphy: Avail curr from USB = 2 Line 529: 01-01 19:26:41.659237 2423 2423 E [ 18.875562]: USB cable not connected Line 808: 01-01 19:26:45.895584 10 10 E [ 23.111909][kworke][0x22b3adb6][11:26:45.893158] wlan: [10:E:WMI] send_action_oui_cmd_tlv: Invalid action id Line 870: 01-01 19:26:51.533277 2386 2386 E [ 28.749602]: USB cable not connected Line 925: 01-01 19:26:55.678229 1 1 I [ 32.894554]init: processing action (vendor.sys.usb.adb.disabled=*) from (/system/etc/init/hw/init.usb.rc:23) Line 925: 01-01 19:26:55.678229 1 1 I [ 32.894554]init: processing action (vendor.sys.usb.adb.disabled=*) from (/system/etc/init/hw/init.usb.rc:23) Line 925: 01-01 19:26:55.678229 1 1 I [ 32.894554]init: processing action (vendor.sys.usb.adb.disabled=*) from (/system/etc/init/hw/init.usb.rc:23) Line 1076: 01-01 19:27:00.344412 3121 3121 W [ 37.560737]: stm_core(E) keyevent_handler(E) qcom_pm8008_regulator(E) ocp2130_bias(E) coresight(E) oplus_bsp_rfcablemonitor(E) oplus_secure_common(OE) oplus_security_keventupload(OE) qcom_vadc_common(E) icc_test(E) hung_task_enhance(E) oplus_mm_kevent(E) qti_battery_debug(E) oplus_bsp_fw_update(E) charger_ulog_glink(E) msm_tsens_driver(E) sps_drv(E) debugcc_sm6115(E) msm_geni_serial(E) usb_f_ccid(E) qcom_va_minidump(E) msm_lmh_dcvs(E) qpnp_lcdb_regulator(E) oplus_bsp_tp_custom(E) oplus_bsp_tp_notify(E) qcom_i2c_pmic(E) oplus_resctrl(E) ucsi_glink(E) oplus_bsp_sensor_feedback(E) init_watchdog(E) olc(E) hung_task_enh(E) pmic_glink_debug(E) oplus_exit_mm_optimize(E) bwmon(E) altmode_glink(E) oplus_bsp_mapped_protect(E) oplus_theia(E) phy_msm_qusb_v2(E) memlat(E) core_hang_detect(E) gpucc_sm6115(E) boot_stats(E) pmic_glink(E) rpm_master_stat(E) debugcc_khaje(E) dispcc_khaje(E) rq_stats(E) glink_pkt(E) cdsprm(E) oplus_bsp_dynamic_readahead(E) msm_gpi(E) cdsp_loader(E) eud(E) Line 1076: 01-01 19:27:00.344412 3121 3121 W [ 37.560737]: stm_core(E) keyevent_handler(E) qcom_pm8008_regulator(E) ocp2130_bias(E) coresight(E) oplus_bsp_rfcablemonitor(E) oplus_secure_common(OE) oplus_security_keventupload(OE) qcom_vadc_common(E) icc_test(E) hung_task_enhance(E) oplus_mm_kevent(E) qti_battery_debug(E) oplus_bsp_fw_update(E) charger_ulog_glink(E) msm_tsens_driver(E) sps_drv(E) debugcc_sm6115(E) msm_geni_serial(E) usb_f_ccid(E) qcom_va_minidump(E) msm_lmh_dcvs(E) qpnp_lcdb_regulator(E) oplus_bsp_tp_custom(E) oplus_bsp_tp_notify(E) qcom_i2c_pmic(E) oplus_resctrl(E) ucsi_glink(E) oplus_bsp_sensor_feedback(E) init_watchdog(E) olc(E) hung_task_enh(E) pmic_glink_debug(E) oplus_exit_mm_optimize(E) bwmon(E) altmode_glink(E) oplus_bsp_mapped_protect(E) oplus_theia(E) phy_msm_qusb_v2(E) memlat(E) core_hang_detect(E) gpucc_sm6115(E) boot_stats(E) pmic_glink(E) rpm_master_stat(E) debugcc_khaje(E) dispcc_khaje(E) rq_stats(E) glink_pkt(E) cdsprm(E) oplus_bsp_dynamic_readahead(E) msm_gpi(E) cdsp_loader(E) eud(E) Line 1078: 01-01 19:27:00.344518 3121 3121 W [ 37.560843]: gcc_khaje(E) oplus_bsp_task_sched(E) gcc_sm6115(E) mem_buf(E) qcom_dma_heaps(E) qseecom_dlkm(OE) oplus_kmsg_wb(E) phy_qcom_ufs_qmp_v3_660(E) phy_qcom_ufs_qrbtc_sdm845(E) phy_qcom_ufs_qmp_v4_khaje(E) qrtr(E) qcom_glink(E) qnoc_bengal(E) qcom_soc_wdt(E) ua_cpu_ioctl(E) smp2p(E) ufshcd_crypto_qti(E) usbpd(E) clk_qcom(E) crypto_qti_common(E) dcc_v2(E) device_info(E) icc_rpm(E) mem_buf_dev(E) oplus_bsp_frame_boost(E) mem_offline(E) memory_dump_v2(E) msm_poweroff(E) oplus_phoenix(E) pinctrl_bengal(E) oplus_schedinfo(E) qcom_iommu_util(E) phy_qcom_ufs(E) oplus_pmicwd(E) pinctrl_khaje(E) qcom_ipc_logging(E) qcom_logbuf_vh(E) rpm_smd_regulator(E) qcom_wdt_core(E) boot_mode(E) gdsc_regulator(E) crypto_qti_tz(E) minidump(E) oplus_bsp_sched_assist(E) oplus_project(E) oplus_mdmfeature(E) oplus_uprobe(E) pinctrl_msm(E) phoenix_reboot_speed(E) qcom_cpufreq_hw(E) qcom_spmi_pmic(E) qcom_smd(E) secure_buffer(E) socinfo(E) rpm_smd(E) qpnp_power_on(E) stub_regulator(E) Line 1079: 01-01 19:27:00.344580 3121 3121 W [ 37.560905]: buildvariant(E) bootloader_log(E) debug_regulator(E) cdt_integrity(E) iommu_logger(E) icc_debug(E) horae_shell_temp(E) kernel_fb(E) msm_dma_iommu_mapping(E) last_boot_reason(E) oplus_bsp_eas_opt(E) nvmem_qcom_spmi_sdam(E) nvmem_qfprom(E) oplus_bsp_midas(E) oplus_bsp_task_cpustats(E) oplus_bsp_mm_osvelte(E) oplus_bsp_task_load(E) oplus_storage_log(E) oplus_fdleak_check(E) oplus_power_notifier(E) oplus_omrg(E) oplus_ftm_mode(E) soc_sleep_stats(E) oplus_mdmrst(E) oplusboot(E) proxy_consumer(E) qcom_apcs_ipc_mailbox(E) smem(E) qcom_dcvs(E) qcom_cpu_vendor_hooks(E) qcom_enhance_watchdog(E) qcom_mpm(E) qcom_pmu_lib(E) qcom_scm(E) qnoc_qos_rpm(E) qrng_dlkm(OE) regmap_spmi(E) qti_regmap_debugfs(E) sdcardfs(E) shutdown_speed(E) spmi_pmic_arb(E) slimbus(E) qcom_hwspinlock(E) Line 1546: 01-01 19:27:22.292131 4918 4918 W [ 59.508456]: Modules linked in: camera(OE) machine_dlkm(OE) wcd937x_dlkm(OE) mbhc_dlkm(OE) fsa4480_i2c(E) oplus_chg_symbol(E) wlan(OE) ipa_clientsm(OE) rndisipam(OE) ipanetm(OE) oplus_chg(E) ipam(OE) rx_macro_dlkm(OE) va_macro_dlkm(OE) tx_macro_dlkm(OE) wcd9xxx_dlkm(OE) pinctrl_lpi_dlkm(OE) adsp_loader_dlkm(OE) audio_pkt_dlkm(OE) swr_ctrl_dlkm(OE) audio_prm_dlkm(OE) bolero_cdc_dlkm(OE) coresight_tmc(E) spf_core_dlkm(OE) gpr_dlkm(OE) usb_f_gsi(E) usb_f_qdss(E) q6_notifier_dlkm(OE) oplus_audio_sipa_tuning(OE) leds_qti_flash(E) oplus_bsp_tp_ft3658u_spi(E) oplus_bsp_tp_ft3419u(E) oplus_bsp_tp_td4377_noflash(E) rmnet_wlan(OE) oplus_bsp_tp_ft3518(E) wcd937x_slave_dlkm(OE) qcom_pon(E) oplus_bsp_tp_ilitek7807s(E) oplus_chg_v2(E) tcpc_rt1711h(E) tcpci_late_sync(E) nxp_nci(OE) oplus_audio_aw87xxx(OE) oplus_bsp_tp_focal_common(E) oplus_network_linkpower_module(OE) bt_fm_slim(OE) coresight_hwevent(E) coresight_tpdm(E) icnss2(OE) nq330(E) dump_reason(E) wsa881x_analog_dlkm(OE) Line 1546: 01-01 19:27:22.292131 4918 4918 W [ 59.508456]: Modules linked in: camera(OE) machine_dlkm(OE) wcd937x_dlkm(OE) mbhc_dlkm(OE) fsa4480_i2c(E) oplus_chg_symbol(E) wlan(OE) ipa_clientsm(OE) rndisipam(OE) ipanetm(OE) oplus_chg(E) ipam(OE) rx_macro_dlkm(OE) va_macro_dlkm(OE) tx_macro_dlkm(OE) wcd9xxx_dlkm(OE) pinctrl_lpi_dlkm(OE) adsp_loader_dlkm(OE) audio_pkt_dlkm(OE) swr_ctrl_dlkm(OE) audio_prm_dlkm(OE) bolero_cdc_dlkm(OE) coresight_tmc(E) spf_core_dlkm(OE) gpr_dlkm(OE) usb_f_gsi(E) usb_f_qdss(E) q6_notifier_dlkm(OE) oplus_audio_sipa_tuning(OE) leds_qti_flash(E) oplus_bsp_tp_ft3658u_spi(E) oplus_bsp_tp_ft3419u(E) oplus_bsp_tp_td4377_noflash(E) rmnet_wlan(OE) oplus_bsp_tp_ft3518(E) wcd937x_slave_dlkm(OE) qcom_pon(E) oplus_bsp_tp_ilitek7807s(E) oplus_chg_v2(E) tcpc_rt1711h(E) tcpci_late_sync(E) nxp_nci(OE) oplus_audio_aw87xxx(OE) oplus_bsp_tp_focal_common(E) oplus_network_linkpower_module(OE) bt_fm_slim(OE) coresight_hwevent(E) coresight_tpdm(E) icnss2(OE) nq330(E) dump_reason(E) wsa881x_analog_dlkm(OE) Line 1548: 01-01 19:27:22.292323 4918 4918 W [ 59.508648]: oplus_networks_tuning(OE) pm8941_pwrkey(E) coresight_remote_etm(E) leds_aw2023(E) qti_qmi_sensor(E) usb_f_diag(E) rt_regmap(E) bcl_soc(E) cpu_hotplug(E) cnss_prealloc(OE) qcom_spmi_temp_alarm(E) oplus_security_guard(OE) qcom_spmi_adc_tm5(E) reboot_mode(E) regulator_cdev(E) i2c_msm_geni(E) qcom_iommu_debug(E) oplus_bsp_tp_ilitek_common(E) qrtr_smd(E) thermal_pause(E) ehset(E) msm_mmrm(OE) leds_qpnp_vibrator_ldo(E) ufcs_class(E) cpufreq_ondemand(E) game_opt(OE) coresight_tgu(E) oplus_data_module(OE) stm_console(E) oplus_audio_pa_manager(OE) qcom_pil_info(E) phy_msm_ssusb_qmp(E) msm_sharedmem(E) oplus_stability_helper(OE) phy_msm_qusb(E) iolimit(E) pmic_monitor(E) spi_msm_geni(E) qcom_spmi_adc5(E) oplus_bsp_memleak_detect(OE) ipa_fmwk(E) msm_qmp(E) oplus_bsp_ir_core(E) qfprom_sys(E) cx_ipeak(E) oplus_bsp_dfr_ubt(E) guestvm_loader(E) qcom_cpufreq_hw_debug(E) rpm_smd_debug(E) leds_qpnp_flash_v2(E) tz_log_dlkm(OE) oplus_game_first(OE) shutdown_detect(E) Line 1548: 01-01 19:27:22.292323 4918 4918 W [ 59.508648]: oplus_networks_tuning(OE) pm8941_pwrkey(E) coresight_remote_etm(E) leds_aw2023(E) qti_qmi_sensor(E) usb_f_diag(E) rt_regmap(E) bcl_soc(E) cpu_hotplug(E) cnss_prealloc(OE) qcom_spmi_temp_alarm(E) oplus_security_guard(OE) qcom_spmi_adc_tm5(E) reboot_mode(E) regulator_cdev(E) i2c_msm_geni(E) qcom_iommu_debug(E) oplus_bsp_tp_ilitek_common(E) qrtr_smd(E) thermal_pause(E) ehset(E) msm_mmrm(OE) leds_qpnp_vibrator_ldo(E) ufcs_class(E) cpufreq_ondemand(E) game_opt(OE) coresight_tgu(E) oplus_data_module(OE) stm_console(E) oplus_audio_pa_manager(OE) qcom_pil_info(E) phy_msm_ssusb_qmp(E) msm_sharedmem(E) oplus_stability_helper(OE) phy_msm_qusb(E) iolimit(E) pmic_monitor(E) spi_msm_geni(E) qcom_spmi_adc5(E) oplus_bsp_memleak_detect(OE) ipa_fmwk(E) msm_qmp(E) oplus_bsp_ir_core(E) qfprom_sys(E) cx_ipeak(E) oplus_bsp_dfr_ubt(E) guestvm_loader(E) qcom_cpufreq_hw_debug(E) rpm_smd_debug(E) leds_qpnp_flash_v2(E) tz_log_dlkm(OE) oplus_game_first(OE) shutdown_detect(E) Line 1548: 01-01 19:27:22.292323 4918 4918 W [ 59.508648]: oplus_networks_tuning(OE) pm8941_pwrkey(E) coresight_remote_etm(E) leds_aw2023(E) qti_qmi_sensor(E) usb_f_diag(E) rt_regmap(E) bcl_soc(E) cpu_hotplug(E) cnss_prealloc(OE) qcom_spmi_temp_alarm(E) oplus_security_guard(OE) qcom_spmi_adc_tm5(E) reboot_mode(E) regulator_cdev(E) i2c_msm_geni(E) qcom_iommu_debug(E) oplus_bsp_tp_ilitek_common(E) qrtr_smd(E) thermal_pause(E) ehset(E) msm_mmrm(OE) leds_qpnp_vibrator_ldo(E) ufcs_class(E) cpufreq_ondemand(E) game_opt(OE) coresight_tgu(E) oplus_data_module(OE) stm_console(E) oplus_audio_pa_manager(OE) qcom_pil_info(E) phy_msm_ssusb_qmp(E) msm_sharedmem(E) oplus_stability_helper(OE) phy_msm_qusb(E) iolimit(E) pmic_monitor(E) spi_msm_geni(E) qcom_spmi_adc5(E) oplus_bsp_memleak_detect(OE) ipa_fmwk(E) msm_qmp(E) oplus_bsp_ir_core(E) qfprom_sys(E) cx_ipeak(E) oplus_bsp_dfr_ubt(E) guestvm_loader(E) qcom_cpufreq_hw_debug(E) rpm_smd_debug(E) leds_qpnp_flash_v2(E) tz_log_dlkm(OE) oplus_game_first(OE) shutdown_detect(E) Line 1549: 01-01 19:27:22.292414 4918 4918 W [ 59.508739]: qti_qmi_cdev(E) rpm_smd_cooling_device(E) rtc_pm8xxx(E) uff_fp_driver(E) bcl_pmic5(E) oplus_nfc(E) oplus_bsp_tp_comon(E) oplus_wifismartantenna(OE) qcom_sysmon(E) oplus_camera_wl2868c(E) oplus_stats_calc(OE) msm_performance(E) usb_f_cdev(E) dump_device_info(E) aw_breath_algorithm(E) frpc_adsprpc(E) qcom_lpm(E) phy_msm_snps_hs(E) f_fs_ipc_log(E) phy_qcom_emu(E) oplus_io_monitor(E) oplus_score(OE) coresight_stm(E) coresight_replicator(E) wcd_core_dlkm(OE) test_kit(E) refgen(E) qti_devfreq_cdev(E) wl2866d_regulator(E) oplus_sensor(E) q6_dlkm(OE) aw37004_regulator(E) fan53870(E) lmh_cpu_vdd_cdev(E) oplus_mm_kevent_fb(E) snd_usb_audio_qmi(E) cnss_utils(OE) q6_pdr_dlkm(OE) sg(E) oplus_freeze_process(OE) rdbg(E) oplus_binder_strategy(E) oplus_app_monitor(OE) snd_event_dlkm(OE) oplus_secure_harden(OE) oplus_qr_scan(OE) dispcc_sm6115(E) qcom_ramdump(E) qpnp_pdphy(E) pd_dbg_info(E) usb_bam(E) stm_p_basic(E) ordump(E) cfg80211(E) phy_generic(E) combkey_monitor(E) Line 1549: 01-01 19:27:22.292414 4918 4918 W [ 59.508739]: qti_qmi_cdev(E) rpm_smd_cooling_device(E) rtc_pm8xxx(E) uff_fp_driver(E) bcl_pmic5(E) oplus_nfc(E) oplus_bsp_tp_comon(E) oplus_wifismartantenna(OE) qcom_sysmon(E) oplus_camera_wl2868c(E) oplus_stats_calc(OE) msm_performance(E) usb_f_cdev(E) dump_device_info(E) aw_breath_algorithm(E) frpc_adsprpc(E) qcom_lpm(E) phy_msm_snps_hs(E) f_fs_ipc_log(E) phy_qcom_emu(E) oplus_io_monitor(E) oplus_score(OE) coresight_stm(E) coresight_replicator(E) wcd_core_dlkm(OE) test_kit(E) refgen(E) qti_devfreq_cdev(E) wl2866d_regulator(E) oplus_sensor(E) q6_dlkm(OE) aw37004_regulator(E) fan53870(E) lmh_cpu_vdd_cdev(E) oplus_mm_kevent_fb(E) snd_usb_audio_qmi(E) cnss_utils(OE) q6_pdr_dlkm(OE) sg(E) oplus_freeze_process(OE) rdbg(E) oplus_binder_strategy(E) oplus_app_monitor(OE) snd_event_dlkm(OE) oplus_secure_harden(OE) oplus_qr_scan(OE) dispcc_sm6115(E) qcom_ramdump(E) qpnp_pdphy(E) pd_dbg_info(E) usb_bam(E) stm_p_basic(E) ordump(E) cfg80211(E) phy_generic(E) combkey_monitor(E) Line 1549: 01-01 19:27:22.292414 4918 4918 W [ 59.508739]: qti_qmi_cdev(E) rpm_smd_cooling_device(E) rtc_pm8xxx(E) uff_fp_driver(E) bcl_pmic5(E) oplus_nfc(E) oplus_bsp_tp_comon(E) oplus_wifismartantenna(OE) qcom_sysmon(E) oplus_camera_wl2868c(E) oplus_stats_calc(OE) msm_performance(E) usb_f_cdev(E) dump_device_info(E) aw_breath_algorithm(E) frpc_adsprpc(E) qcom_lpm(E) phy_msm_snps_hs(E) f_fs_ipc_log(E) phy_qcom_emu(E) oplus_io_monitor(E) oplus_score(OE) coresight_stm(E) coresight_replicator(E) wcd_core_dlkm(OE) test_kit(E) refgen(E) qti_devfreq_cdev(E) wl2866d_regulator(E) oplus_sensor(E) q6_dlkm(OE) aw37004_regulator(E) fan53870(E) lmh_cpu_vdd_cdev(E) oplus_mm_kevent_fb(E) snd_usb_audio_qmi(E) cnss_utils(OE) q6_pdr_dlkm(OE) sg(E) oplus_freeze_process(OE) rdbg(E) oplus_binder_strategy(E) oplus_app_monitor(OE) snd_event_dlkm(OE) oplus_secure_harden(OE) oplus_qr_scan(OE) dispcc_sm6115(E) qcom_ramdump(E) qpnp_pdphy(E) pd_dbg_info(E) usb_bam(E) stm_p_basic(E) ordump(E) cfg80211(E) phy_generic(E) combkey_monitor(E) Line 1550: 01-01 19:27:22.292523 4918 4918 W [ 59.508848]: stm_core(E) keyevent_handler(E) qcom_pm8008_regulator(E) ocp2130_bias(E) coresight(E) oplus_bsp_rfcablemonitor(E) oplus_secure_common(OE) oplus_security_keventupload(OE) qcom_vadc_common(E) icc_test(E) hung_task_enhance(E) oplus_mm_kevent(E) qti_battery_debug(E) oplus_bsp_fw_update(E) charger_ulog_glink(E) msm_tsens_driver(E) sps_drv(E) debugcc_sm6115(E) msm_geni_serial(E) usb_f_ccid(E) qcom_va_minidump(E) msm_lmh_dcvs(E) qpnp_lcdb_regulator(E) oplus_bsp_tp_custom(E) oplus_bsp_tp_notify(E) qcom_i2c_pmic(E) oplus_resctrl(E) ucsi_glink(E) oplus_bsp_sensor_feedback(E) init_watchdog(E) olc(E) hung_task_enh(E) pmic_glink_debug(E) oplus_exit_mm_optimize(E) bwmon(E) altmode_glink(E) oplus_bsp_mapped_protect(E) oplus_theia(E) phy_msm_qusb_v2(E) memlat(E) core_hang_detect(E) gpucc_sm6115(E) boot_stats(E) pmic_glink(E) rpm_master_stat(E) debugcc_khaje(E) dispcc_khaje(E) rq_stats(E) glink_pkt(E) cdsprm(E) oplus_bsp_dynamic_readahead(E) msm_gpi(E) cdsp_loader(E) eud(E) Line 1550: 01-01 19:27:22.292523 4918 4918 W [ 59.508848]: stm_core(E) keyevent_handler(E) qcom_pm8008_regulator(E) ocp2130_bias(E) coresight(E) oplus_bsp_rfcablemonitor(E) oplus_secure_common(OE) oplus_security_keventupload(OE) qcom_vadc_common(E) icc_test(E) hung_task_enhance(E) oplus_mm_kevent(E) qti_battery_debug(E) oplus_bsp_fw_update(E) charger_ulog_glink(E) msm_tsens_driver(E) sps_drv(E) debugcc_sm6115(E) msm_geni_serial(E) usb_f_ccid(E) qcom_va_minidump(E) msm_lmh_dcvs(E) qpnp_lcdb_regulator(E) oplus_bsp_tp_custom(E) oplus_bsp_tp_notify(E) qcom_i2c_pmic(E) oplus_resctrl(E) ucsi_glink(E) oplus_bsp_sensor_feedback(E) init_watchdog(E) olc(E) hung_task_enh(E) pmic_glink_debug(E) oplus_exit_mm_optimize(E) bwmon(E) altmode_glink(E) oplus_bsp_mapped_protect(E) oplus_theia(E) phy_msm_qusb_v2(E) memlat(E) core_hang_detect(E) gpucc_sm6115(E) boot_stats(E) pmic_glink(E) rpm_master_stat(E) debugcc_khaje(E) dispcc_khaje(E) rq_stats(E) glink_pkt(E) cdsprm(E) oplus_bsp_dynamic_readahead(E) msm_gpi(E) cdsp_loader(E) eud(E) Line 1552: 01-01 19:27:22.292697 4918 4918 W [ 59.509022]: gcc_khaje(E) oplus_bsp_task_sched(E) gcc_sm6115(E) mem_buf(E) qcom_dma_heaps(E) qseecom_dlkm(OE) oplus_kmsg_wb(E) phy_qcom_ufs_qmp_v3_660(E) phy_qcom_ufs_qrbtc_sdm845(E) phy_qcom_ufs_qmp_v4_khaje(E) qrtr(E) qcom_glink(E) qnoc_bengal(E) qcom_soc_wdt(E) ua_cpu_ioctl(E) smp2p(E) ufshcd_crypto_qti(E) usbpd(E) clk_qcom(E) crypto_qti_common(E) dcc_v2(E) device_info(E) icc_rpm(E) mem_buf_dev(E) oplus_bsp_frame_boost(E) mem_offline(E) memory_dump_v2(E) msm_poweroff(E) oplus_phoenix(E) pinctrl_bengal(E) oplus_schedinfo(E) qcom_iommu_util(E) phy_qcom_ufs(E) oplus_pmicwd(E) pinctrl_khaje(E) qcom_ipc_logging(E) qcom_logbuf_vh(E) rpm_smd_regulator(E) qcom_wdt_core(E) boot_mode(E) gdsc_regulator(E) crypto_qti_tz(E) minidump(E) oplus_bsp_sched_assist(E) oplus_project(E) oplus_mdmfeature(E) oplus_uprobe(E) pinctrl_msm(E) phoenix_reboot_speed(E) qcom_cpufreq_hw(E) qcom_spmi_pmic(E) qcom_smd(E) secure_buffer(E) socinfo(E) rpm_smd(E) qpnp_power_on(E) stub_regulator(E) 这个是对应时间的kernel日志
最新发布
08-13
我们分析日志中与ADB、USB、adbd服务相关的错误或异常信息，以确定设备重启后ADB连接失败的原因。 根据日志，我们注意到以下关键点： 1.... - Line 3511: adbd started - Line 3513: 尝试打开控制端点 `/dev/usb-...
高通开发系列 - linux kernel内核升级msm-3.xx升至msm-4.xx(1)
fulinux的博客
02-10 2356
高通开发系列 - linux kernel更新msm-3.18升至msm-4.9
SPMI协议的理解
热门推荐
打工人的天堂
04-11 1万+
SPMI协议理解 SPMI总线分高速和低速，高速是0-26MHz，低速是0-15MHz；总线上最多4个主设备，16个从设备；当前控制总线的主设备叫BOM，从设备分2种：一种不能申请占总线，另一种能申请占总线，这种情况下CLK的时钟是BOM发的，从设备只控制数据总线。 SPMI主设备的2个信号线是CMOS结构，从设备也是，但从设备内可以集成500k-2M的下拉电阻，也可以放到外面的连接线上；但若从设备多了，总的下拉电阻必须大于125K. 每次数据通信前，都有一个总线仲裁的过程，各设备在仲裁阶段申请总线，
qcom charger
☆ 默默地牛逼着
02-09 8490
1.充电类型 The four power source types that are detected are: 1. Standard downstream port (SDP) – This is a computer USB port capable of USB 1.1 (100 mA), USB 2.0 (100/500 mA), or USB 3.0 (150/900 mA). ...
Qcom平台RTC驱动分析
weixin_30546933的博客
07-03 801
相关文件list： pm8998.dtsi　---RTC dts配置 qpnp-rtc.c　 ---qcom RTC驱动 class.c　　　 ---RTC相关class interface.c ---相关RTC功能的接口定义 hctosys.c ---一开机通过RTC设置系统时间rtc-dev.c　　 ---RTC device fops接口：open、close、ioct...
高通平台ADC开发-AT+QTEMP
Gick
12-26 3601
1.高通平台AP内部没有集成ADC电路，使用的是PMU内部的ADC，通过PMU的GPIO或者AMUX采集接口，AT+QADC命令采集电压信息，AT+QTEMP命令将采集的电压信息转换为温度信息，信息通过spmi总线发送给AP处理。sdx55平台使用的PMU型号为PMX55，内部集成的ADC channel信息如下： PMX55 ADC功能图： ADC channel定义在qcom,sp...
linux之spmi设备注册
zll5258的博客
01-27 2995
Kernel/drivers/base/core.c:1002 device_add() Kernel/drivers/spmi/spmi.c:228 spmi_add_device() Kernel/drivers/spmi/spmi.c:260 spmi_new_device() Kernel/drivers/of/of_spmi.c: 221 spmi_of_create_device
Qcom wled 方式背光控制
fikinging
08-24 1895
1 .注册部分     kernel/msm-3.18/drivers/leds/leds-qpnp-wled.c ------------------------------------------------------------------------------     static int qpnp_wled_probe(struct spmi_device *spmi)  
MSM8953 audio dts 代码跟踪
weixin_30657541的博客
03-05 1319
跟一下msm8953音频的dts。 msm8953-audio-mtp.dtsi &int_codec { status = "okay"; qcom,model = "msm8953-snd-card-mtp"; qcom,msm-hs-micbias-type = "internal"; // 具有内部MICBIAS qcom,msm-spk-ext-...
android studio debug模式下和release模式下代码不一样_android 功耗分析方法和优化（1）...
weixin_28989357的博客
12-28 749
1、底电流调试(Rock Bottom Current Optimization)底电流在手机飞行模式下调试。每个平台的底电流数据可能不一样，具体可以参考release出来的Current Consumption Data文档或者release note。一般情况下的底电流参考数据上限是：底电流在手机飞行模式下调试。每个平台的底电流数据可能不一样，具体可以参考release出来的Current C...
抓ram dump
m0_37166404的博客
06-26 2730
抓取工具：QPST 解析工具：CrasScope 抓取QPST的原理： 系统需要触发crash， 同时机器需要进行warm reset 当进入warm reset的时候，QPST可以开始抓取ram dump了，此时正常的电流为 这里有三种方法可以触发crash，然后进入warm reset： 1.命令方法 输入以下命令 cd /d/regmap/spmi0-00 ------...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值