cisco 3600 router modem dial and ce1 configure!

本文详细介绍了路由器的配置内容,包括接口设置、路由协议配置、访问控制列表等关键信息。通过具体的配置命令展示了如何进行网络参数调整及安全策略设定。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

User Access Verification

Password:
Password:
cz_3640>en
Password:
cz_3640#sh run
Building configuration...

Current configuration : 3993 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname cz_3640
!
netbios access-list host zmserver deny zmdomain
no logging on
enable secret 5 $1$JjOZ$VjzhZcEHibT8II2aGyY2X.
!
username xxxxx password 0 xxxxx
username xxxxx password 0 xxxxx
username xxxxx password 0 xxxxx
username xxxxx password 0 xxxxx
modem country microcom_hdms china
ip subnet-zero
!
!
no ip finger
no ip domain-lookup
ip name-server 10.50.64.40
!
ip multicast-routing
chat-script callback ABORT ERROR ABORT BUSY "" "ATDT/T" TIMEOUT 30 "CONNECT" /c
chat-script offhook "" "ATH1" OK
modemcap entry 33 40
!
!
controller E1 3/0
 channel-group 0 timeslots 1-31
!
controller E1 3/1
 channel-group 0 timeslots 1-31
!
!
interface Loopback0
 ip address 10.50.71.250 255.255.255.252
!
interface FastEthernet0/0
 description this lan link to the local network
 ip address 10.50.70.5 255.255.255.0
 ip directed-broadcast
 ip pim dense-mode
 ip cgmp
 speed auto
 half-duplex
 priority-group 16
 no cdp enable
!
interface Serial3/0:0
 description this prot link to dingyuan
 bandwidth 2000
 ip address 10.50.84.13 255.255.255.252
 priority-group 16
!
interface Serial3/1:0
 description this prot link to fengyang
 ip address 10.50.84.17 255.255.255.252
!
interface Async33
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
interface Async34
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
interface Async35
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
interface Async36
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
interface Async37
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
interface Async38
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
interface Async39
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
interface Async40
 ip unnumbered FastEthernet0/0
 encapsulation ppp
 async mode interactive
 peer default ip address pool modem
 ppp callback accept
 ppp authentication chap
!
router ospf 1
 log-adjacency-changes
 area 550 range 10.50.64.0 255.255.224.0
 redistribute rip
 network 10.2.172.0 0.0.0.15 area 550
 network 10.48.128.54 0.0.0.0 area 0
 network 10.48.128.182 0.0.0.0 area 0
 network 10.50.64.0 0.0.0.255 area 550
 network 10.50.70.0 0.0.0.255 area 550
 network 10.50.71.250 0.0.0.0 area 550
 network 10.50.71.254 0.0.0.0 area 550
 network 10.50.84.13 0.0.0.0 area 550
 network 10.50.84.17 0.0.0.0 area 550
 default-metric 64
!
router rip
 version 2
 redistribute ospf 1
 network 10.0.0.0
 default-metric 2
 no auto-summary
!
ip local pool modem 10.50.70.210 10.50.70.219
ip classless
ip route 10.50.64.0 255.255.255.0 10.50.70.1
ip route 10.246.0.0 255.255.0.0 10.50.70.6
no ip http server
!
access-list 10 permit 10.50.70.251
priority-list 16 protocol ip high list 10
!
line con 0
 transport input none
line 33 40
 autoselect during-login
 autoselect ppp
 script modem-off-hook offhook
 script callback callback
 login local
 modem InOut
 modem autoconfigure discovery
 transport input all
 autohangup
 stopbits 1
 flowcontrol hardware
line aux 0
line vty 0 4
 password xxxxx
 login
!
end

 
内容概要:本文档详细介绍了基于MATLAB实现多目标差分进化(MODE)算法进行无人机三维路径规划的项目实例。项目旨在提升无人机在复杂三维环境中路径规划的精度、实时性、多目标协调处理能力、障碍物避让能力和路径平滑性。通过引入多目标差分进化算法,项目解决了传统路径规划算法在动态环境和多目标优化中的不足,实现了路径长度、飞行安全距离、能耗等多个目标的协调优化。文档涵盖了环境建模、路径编码、多目标优化策略、障碍物检测与避让、路径平滑处理等关键技术模块,并提供了部分MATLAB代码示例。 适合人群:具备一定编程基础,对无人机路径规划和多目标优化算法感兴趣的科研人员、工程师和研究生。 使用场景及目标:①适用于无人机在军事侦察、环境监测、灾害救援、物流运输、城市管理等领域的三维路径规划;②通过多目标差分进化算法,优化路径长度、飞行安全距离、能耗等多目标,提升无人机任务执行效率和安全性;③解决动态环境变化、实时路径调整和复杂障碍物避让等问题。 其他说明:项目采用模块化设计,便于集成不同的优化目标和动态环境因素,支持后续算法升级与功能扩展。通过系统实现和仿真实验验证,项目不仅提升了理论研究的实用价值,还为无人机智能自主飞行提供了技术基础。文档提供了详细的代码示例,有助于读者深入理解和实践该项目。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值