fopen()、fwrite()、fread()

文件基本操作:fopen()、fwrite()、fprintf()、fflush()、fclose()、fseek()、fread()、fscanf() fopen()、fwrite()、fprintf()、fflush()、fclose()、fseek()、fread()、fscanf()、fputc()、fputs()、fgetc()、fgets()、feof()。 阅读详情

转载自:http://blog.youkuaiyun.com/yang2011079080010/article/details/52528261
看了好多篇关于fopen(),fread(),fwrite() 的文章,个人感觉这一篇讲的真的很好。

fopen()函数:
1.作用: 在C语言中fopen()函数用于打开指定路径的文件,获取指向该文件的指针。
2.函数原型:

FILE * fopen(const char * path,const char * mode);  
    -- path: 文件路径,如:"F:\Visual Stdio 2012\test.txt"  
    -- mode: 文件打开方式,例如:  
             "r" 以只读方式打开文件,该文件必须存在。  
             "w" 打开只写文件,若文件存在则文件长度清为0,即该文件内容会消失。若文件不存在则建立该文件。  
            "w+" 打开可读写文件,若文件存在则文件长度清为零,即该文件内容会消失。若文件不存在则建立该文件。  
             "a" 以附加的方式打开只写文件。若文件不存在,则会建立该文件,如果文件存在,写入的数据会被加到文件尾,即文件原先的内容会被保留。(EOF符保留)  
             "a+" 以附加方式打开可读写的文件。若文件不存在,则会建立该文件,如果文件存在,写入的数据会被加到文件尾后,即文件原先的内容会被保留。(原来的EOF符不保留)  
            "wb" 只写打开或新建一个二进制文件,只允许写数据。  
            "wb+" 读写打开或建立一个二进制文件,允许读和写。  
             "ab" 追加打开一个二进制文件,并在文件末尾写数据。  
             "ab+"读写打开一个二进制文件,允许读,或在文件末追加数据。     
    --返回值: 文件顺利打开后,指向该流的文件指针就会被返回。如果文件打开失败则返回NULL,并把错误代码存在errno中。

fwrite()函数:
1.作用:在C语言中fwrite()函数常用语将一块内存区域中的数据写入到本地文本。
2.函数原型:

size_t fwrite(const void* buffer, size_t size, size_t count, FILE* stream);  
    -- buffer:指向数据块的指针  
    -- size:每个数据的大小,单位为Byte(例如:sizeof(int)就是4)  
    -- count:数据个数  
    -- stream:文件指针

注意:返回值随着调用格式的不同而不同:
(1) 调用格式:fwrite(buf,sizeof(buf),1,fp);
成功写入返回值为1(即count)

(2)调用格式:fwrite(buf,1,sizeof(buf),fp);
成功写入则返回实际写入的数据个数(单位为Byte)

  1. 注意事项:
    写完数据后要调用fclose()关闭流,不关闭流的情况下,每次读或写数据后,文件指针都会指向下一个待写或者读数据位置的指针。
    示例说明:
    代码1:下面代码可将1024个字(int)写入到文本文件,fwrite的调用中,size是sizeof(int),count是DATA_SIZE
#include "stdafx.h"  
#define _CRT_SECURE_NO_WARNINGS  
#include <stdio.h>  
#include <stdlib.h>  
#define DATA_SIZE 1024  

int main()  
{  
    unsigned int *dataPtr = NULL;  
    dataPtr = (unsigned int *)malloc(sizeof(int)*DATA_SIZE);  
    for(unsigned int i=0;i<DATA_SIZE;i++)  
    {  
        dataPtr[i] = i; //初始化缓存区  
    }  
    FILE *fp = fopen("F:\\Labwindows cvi\\test.txt","w");  
    fwrite(dataPtr,sizeof(int),DATA_SIZE,fp);  
       fclose(fp);  
       free(dataPtr);  
    system("pause");  
    return 0;  
} 

代码2:下面代码也可将1024个字写到文本中,虽然fwrite函数中,size是1,但count是DATA_SIZE*sizeof(int)。与代码1实现的结果一样。

// datasave.cpp : 定义控制台应用程序的入口点。  
//  

#include "stdafx.h"  
#define _CRT_SECURE_NO_WARNINGS  
#include <stdio.h>  
#include <stdlib.h>  
#define DATA_SIZE 1024  

int main()  
{  
    unsigned int *dataPtr = NULL;  
    dataPtr = (unsigned int *)malloc(sizeof(int)*DATA_SIZE);  
    for(unsigned int i=0;i<DATA_SIZE;i++)  
    {  
        dataPtr[i] = i; //初始化缓存区  
    }  
    FILE *fp = fopen("F:\\Labwindows cvi\\test.txt","ab+");  
    fwrite(dataPtr,1,DATA_SIZE*sizeof(unsigned int),fp);  
<pre name="code" class="cpp">       fclose(fp);  
<pre name="code" class="cpp">       free(dataPtr); 
 system("pause");    return 0;}

代码3:下面的代码将4096个char数据写到文本,写入的数据中,最大值为255,与上面代码1、2有区别,因为缓存区数据类型不同

// datasave.cpp : 定义控制台应用程序的入口点。  
//  

#include "stdafx.h"  
#define _CRT_SECURE_NO_WARNINGS  
#include <stdio.h>  
#include <stdlib.h>  
#define DATA_SIZE 1024  

int main()  
{  
    unsigned char *dataPtr = NULL;  
    dataPtr = (unsigned char *)malloc(sizeof(int)*DATA_SIZE); //申请的区域是4096个char,即1024个字的区域  
    for(unsigned int i=0;i<DATA_SIZE;i++)  
    {  
        dataPtr[i] = i; //初始化缓存区  
    }  
    FILE *fp = fopen("F:\\Labwindows cvi\\test.txt","ab+");  
    fwrite(dataPtr,sizeof(char),DATA_SIZE*sizeof(int),fp);  
    fclose(fp);        
       free(dataPtr);  
    system("pause");  
    return 0;  
} 

代码4:用malloc函数申请区域时是申请的一片char*区域,通过强制类型转换后可装unsigned int 数据。

// datasave.cpp : 定义控制台应用程序的入口点。  
//  

#include "stdafx.h"  
#define _CRT_SECURE_NO_WARNINGS  
#include <stdio.h>  
#include <stdlib.h>  
#define DATA_SIZE 1024  

int main()  
{  
    unsigned char *dataPtr = NULL;  
    unsigned int *Ptr = NULL;  
    dataPtr = (unsigned char *)malloc(sizeof(int)*DATA_SIZE);  
    Ptr = (unsigned int *) dataPtr;  
    for(unsigned int i=0;i<DATA_SIZE;i++)  
    {  
        Ptr[i] = i;   
    }  
    FILE *fp = fopen("F:\\Labwindows cvi\\test.txt","ab+");  
    fwrite(Ptr,sizeof(unsigned int),DATA_SIZE,fp);  
    fclose(fp);  
    free(dataPtr);  
   system("pause");  
    return 0;  
}  

fread()函数:
1. 作用:从一个文件流中读取数据
2. 函数原型如下:

size_t fread(void *buffer, size_t size, size_t count, FILE *stream);  
  -- buffer:指向数据块的指针  
  -- size:每个数据的大小,单位为Byte(例如:sizeof(int)就是4)  
  -- count:数据个数  
  -- stream:文件指针

注意:返回值随着调用格式的不同而不同:
(1) 调用格式:fread(buf,sizeof(buf),1,fp);
读取成功时:当读取的数据量正好是sizeof(buf)个Byte时,返回值为1(即count)
否则返回值为0(读取数据量小于sizeof(buf))
(2)调用格式:fread(buf,1,sizeof(buf),fp);
读取成功返回值为实际读回的数据个数(单位为Byte)
代码参考:

#include <stdio.h>  
#include <stdlib.h>  
#include <string.h>  


int main(int argc, char *argv[])  
{  
    FILE *filp = NULL;  
    char fileDir[] = "/home/yangzhiyuan/Documents/test.txt";   
    char dataPtr[] = "Helloworld";  
    printf("sizeof(dataPtr) = %ld\n",sizeof(dataPtr));  
    filp = fopen(fileDir,"w+");  /* 可读可写,不存在则创建 */  
    int writeCnt = fwrite(dataPtr,sizeof(dataPtr),1,filp);  /* 返回值为1 */  
    //int writeCnt = fwrite(dataPtr,1,sizeof(dataPtr),filp);  /* 返回值为11 */  
    printf("writeCnt = %d\n",writeCnt);  
    fclose(filp);  

    FILE *fp = NULL;  
    fp = fopen(fileDir,"r");  
    char buffer[256];  
    int readCnt = fread(buffer,sizeof(buffer),1,fp);  /* 返回值为0 */  
    //int readCnt = fread(buffer,1,sizeof(buffer),fp);  /* 返回值为11 */      
    printf("readCnt = %d\n",readCnt);  
    fclose(fp);  

    printf("%s\n",buffer);  
    exit(0);  
}

注意:本例代码中定义了两个FILE变量,一个用于write,一个用于read,写完后要close掉,然后再打开,然后读。如果直接使用一个FILE变量,会出错!

408计算机复试专业课问答汇总 阅读详情

相关推荐

Cesium实战:全球海洋动态水面与自定义区域波浪效果实现

本文详细介绍了在Cesium中实现全球海洋动态水面与自定义区域波浪效果的实战方法。通过解析核心概念Primitive与Geometry,并深入讲解Water材质的关键参数调节,指导开发者快速创建逼真的动态海洋。文章重点阐述了如何利用多边形坐标定义不规则图形区域,实现精准的局部水域波浪效果,并提供了性能优化与视觉提升的实用技巧。

weixin_29256771的博客 502

标准 I/O 库函数:fopen()、fwrite()、fread()、fclose()详解

fopen()、fwrite()、fread()、fclose()等函数属于标准 I/O 库函数,调用这些函数需要包含头文件。这些函数都是构建于文件 I/O(open()、read()、write()、lseek()、close()等)这些系统调用之上的。

Penseur2018的博客 3663

浪潮服务器ESXI6.7部署实战:手动集成RAID驱动避坑指南

本文详细介绍了在浪潮服务器上部署ESXI6.7时手动集成RAID驱动的完整流程和避坑指南。从驱动获取、解压技巧到封装实战,逐步解决国产服务器常见的驱动缺失问题,特别针对PM8060 RAID卡提供具体解决方案,帮助IT运维人员顺利完成ESXI部署。

weixin_33725722的博客 463

c语言 fopen、fwrite、fread、fclose函数(打开文件进行读写覆盖或追加)fgets()函数

文章目录描述声明参数返回值实例 描述 C 库函数 FILE *fopen(const char *filename, const char *mode) 使用给定的模式 mode 打开 filename 所指向的文件。 声明 下面是 fopen() 函数的声明。 FILE *fopen(const char *filename, const char *mode) 参数 filename – 这是 C 字符串,包含了要打开的文件名称。 mode – 这是 C 字符串,包含了文件访问模式,模式如下: 模

Dontla的博客 1万+

Wazuh部署记录

Wazuh是一个免费的开源安全平台,统一了XDR和SIEM功能。它可以保护内部部署、虚拟化、容器化和基于云的环境中的工作负载。Wazuh帮助组织和个人保护其数据资产免受安全威胁。它被全球数千个组织广泛使用,从小型企业到大型企业。443:仪表盘界面访问端口1515:探针连接服务器端口1514:探针回传信息端口以上3个端口必须打开防火墙。

墨痕诉清风的博客 1564

fopen fwrite fread函数的介绍

使用C语言相关IO操作时注意文本格式和二进制格式的区别

无 405

YOLO系列算法改进 | C2PSA改进篇 | 融合FSD频域结构解耦模块 | 双域解耦感知,兼顾全局亮度与局部纹理,适应红外小目标与边缘部署场景 | ICME 2026

YOLO系列算法改进 | C2PSA改进篇 | 融合FSD频域结构解耦模块 | 双域解耦感知,兼顾全局亮度与局部纹理,适应红外小目标与边缘部署场景 | ICME 2026 (以YOLO26最新目标检测模型为基础,利用C2PSA_FSD创新模块进行改进)

2502_91881744的博客 317

菜鸟教程:fopen()、fwrite()、fread()、fseek()、flcose()

标准IO函数。

qq_48087696的博客 1800

PCL体素滤波器【2026最新版】

PCL实现的VoxelGrid类和ApproximateVoxelGrid体素滤波,详细记录。博客长期更新,本文最近一次更新时间为:2026年3月14日。

点云侠的博客 39万+

【OpenClaw从入门到精通】:Web控制台使用全解析——可视化配置与监控(2026实操版)

在OpenClaw的多种管理方式中,Web控制台提供了最直观、最友好的用户体验。通过图形化界面,用户可以轻松完成复杂的配置任务,实时监控系统状态,以及进行各种管理操作。对于不熟悉命令行的用户来说,Web控制台是最佳选择。

一键难忘的博客 1934

文件操作(一、fgets和fputs、fscanf和fprintf、fread 和 fwrite、fopen和fclose、fgetc和fputc)

磁盘上的文件是文件。但是在程序设计中,我们一般谈的文件有两种:程序文件、数据文件(从文件功能的角度来分类的)。

走在努力路上的自己的博客 2516

【PG高可用】一 PostgreSQL高可用方案repmgr部署(非常详细)

repmgr安装部署

DBA之路的博客 7058

fopen()、fwrite()、fread()函数使用说明与示例

fopen()函数: 1.作用: 在C语言中fopen()函数用于打开指定路径的文件,获取指向该文件的指针。 2.函数原型: FILE * fopen(const char * path,const char * mode); -- path: 文件路径,如:"F:\Visual Stdio 2012\test.txt" -- mode: 文件打开方式,例如:

yang2011079080010的专栏 22万+

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

Linux应用编程之fopen()、fclose()、fread()、fwrite()函数

1、fopen()函数调用fopen()函数可以打开或创建一个文件。 #include <stdio.h> FILE *fopen(const char *path, const char *mode); path:参数 path 指向文件路径,可以是绝对路径、也可以是相对路径。 mode:参数 mode 指定了对该文件的读写权限,是一个字符串。 返回值:调用成功返回一个指向 FILE 类型对象的指针(FILE *),该指针与打开或创建的文件相关联, 后续的标准 I/O 操作将围绕

shengnan89的博客 6472

汉书HE8,好用的汇编代码编写工具

汉书HE8,好用的汇编代码编写工具早期编写汇编代码所用功能强大

fopen()、fwrite()、fread()函数使用

fopen()函数: 1.作用: 在C语言中fopen()函数用于打开指定路径的文件,获取指向该文件的指针。 2.函数原型: FILE * fopen(const char * path,const char * mode); – path: 文件路径,如:“F:\Visual Stdio 2012\test.txt” – mode: 文件打开方式,例如: “r” 以只读方式打开文件,该文件必须存在。 “w” 打开只写文件,若文件存在则文件长度清为0,即该文件内容会消失。若文件不存在则建立该文件。 “w+

肖肖的博客 475

文档:亲测可用解决vnc灰屏,黑屏,鼠标大黑叉情况

主要解决vnc-viewer灰屏,黑屏,鼠标大黑叉等现象,详细见文档。

fopen()、fwrite()、fread()函数

fopen()函数: 1.作用: 在C语言中fopen()函数用于打开指定路径的文件,获取指向该文件的指针。 2.函数原型:FILE * fopen(const char * path,const char * mode); – path: 文件路径,如:”F:\Visual Stdio 2012\test.txt” – mode: 文件打开方式,例如:

llmmssing的博客 300

C语言:文件函数 fopen(),fclose(),fwrite(),fread()

文件打开函数:fopen fopen函数是在当前目录下打开一个文件,其调用的一般形式为: 文件指针名=fopen(文件名,使用文件方式);  ex: FILE *fr = fopen(srcpath,"r"); FILE *fw = fopen(despath,"w"); FILE *fr =fopen("c:\\1.test","rb"); 其意义是打开C驱动器磁盘

qq_40657299的博客 4121

标准C库函数:fopen(),fwrite(),fread(),fseek(),fclose()的基本用法。

① const char *pathname:文件名/路径,这是char型指针,须在”文件名/路径“上加上双引号;② const char *mode:文件的操作权限,这里也是字符型指针,须在“操作权限”上加双引号;实际写入长度为size_t nmemb,返回值为块成功写入块的nmemb数量。② size_t size: size是的块长度;② size_t size: size是块长度。③ size_t nmemb: nmemb是块的数量;

m0_74985965的博客 3125

C/C++读写文件的几种方法fstream fopen、fwrite()、fread()操作

C中采用的主要是文件指针的办法,C++中对文件的操作主要运用了“文件流”(即非标准的输入输出)的思想 c读写文件fopen C 库函数 FILE *fopen(const char *filename, const char *mode) 使用给定的模式 mode 打开 filename 所指向的文件。 包含头文件: #include<stdio.h> fopen() 函数的声明 ...

Hello World 5154
上一篇: Swift3.0 shadowColor
下一篇: App开发模式
猿人在北京
博客等级 码龄11年 92粉丝 94原创
评论 1
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值