Bluefruit_LE_Connect 项目推荐

Bluefruit_LE_Connect 项目推荐

Bluefruit_LE_Connect iOS app for use with Bluefruit Bluetooth LE breakout board Bluefruit_LE_Connect 项目地址: https://gitcode.com/gh_mirrors/bl/Bluefruit_LE_Connect

项目基础介绍和主要编程语言

Bluefruit_LE_Connect 是一个由 Adafruit 公司开发的开源项目,主要用于与 Adafruit 的 Bluefruit LE 硬件系列进行交互。该项目的主要编程语言包括 Swift 和 Objective-C,这两种语言在 iOS 开发中广泛使用,确保了应用的高效性和稳定性。

项目核心功能

Bluefruit_LE_Connect 的核心功能是为 iOS 设备提供与 Bluefruit LE 蓝牙模块的连接和控制。通过该应用,用户可以轻松地与 Adafruit 的 Bluefruit LE 硬件进行通信,实现数据传输、设备控制等功能。具体功能包括:

  • 蓝牙连接管理:支持与 Bluefruit LE 设备的蓝牙连接,提供稳定的通信通道。
  • 数据传输:实现设备与应用之间的数据传输,支持实时数据交换。
  • 设备控制:通过应用界面控制 Bluefruit LE 设备的各种功能,如开关、传感器数据读取等。

项目最近更新的功能

由于该项目已被 Adafruit 公司归档,最近没有新的更新。最后一次更新是在 2018 年 8 月,之后项目被标记为只读状态。因此,目前没有新的功能添加或更新。

总结来说,Bluefruit_LE_Connect 是一个功能强大且稳定的开源项目,适用于需要与 Adafruit Bluefruit LE 硬件进行交互的开发者。尽管项目已被归档,但其核心功能和代码仍然具有很高的参考价值。

Bluefruit_LE_Connect iOS app for use with Bluefruit Bluetooth LE breakout board Bluefruit_LE_Connect 项目地址: https://gitcode.com/gh_mirrors/bl/Bluefruit_LE_Connect

创作声明:本文部分内容由AI辅助生成(AIGC),仅供参考

/********************************************************************* This is an example for our nRF52 based Bluefruit LE modules Pick one up today in the adafruit shop! Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit! MIT license, check LICENSE for more information All text above, and the splash screen below must be included in any redistribution *********************************************************************/ /* * This sketch demonstrate the central API(). A additional bluefruit * that has bleuart as peripheral is required for the demo. */ #include <bluefruit.h> BLEClientBas clientBas; // battery client BLEClientDis clientDis; // device information client BLEClientUart clientUart; // bleuart client void setup() { Serial.begin(115200); // while ( !Serial ) delay(10); // for nrf52840 with native usb Serial.println("Bluefruit52 Central BLEUART Example"); Serial.println("-----------------------------------\n"); // Initialize Bluefruit with maximum connections as Peripheral = 0, Central = 1 // SRAM usage required by SoftDevice will increase dramatically with number of connections Bluefruit.begin(0, 1); Bluefruit.setName("Bluefruit52 Central"); // Configure Battery client clientBas.begin(); // Configure DIS client clientDis.begin(); // Init BLE Central Uart Serivce clientUart.begin(); clientUart.setRxCallback(bleuart_rx_callback); // Increase Blink rate to different from PrPh advertising mode Bluefruit.setConnLedInterval(250); // Callbacks for Central Bluefruit.Central.setConnectCallback(connect_callback); Bluefruit.Central.setDisconnectCallback(disconnect_callback); /* Start Central Scanning * - Enable auto scan if disconnected * - Interval = 100 ms, window = 80 ms * - Don't use active scan * - Start(timeout) with timeout = 0 will scan forever (until connected) */
04-01
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

董瑾红William

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值