TCP连接的建立和断开过程详解 - 以单片机为例

单片机 专栏收录该内容
¥59.90 ¥99.00
139篇文章

TCP是一种面向连接的协议,用于在网络上传输数据。在使用TCP协议进行通信时,需要先建立连接,然后传输数据,最后断开连接。本文将详细介绍TCP连接的建立和断开过程,并附上相应的源代码。

一、TCP连接的建立过程

TCP连接的建立过程可以分为三个阶段:建立连接请求、确认连接请求、建立连接确认。下面详细介绍每个阶段的具体操作。

  1. 建立连接请求

建立连接请求阶段,客户端通过发送SYN包告知服务器客户端要建立连接。SYN包包含以下几个字段:

  • 源端口号
  • 目标端口号
  • 序列号(随机生成)
  • SYN标志置为1

客户端发送完SYN包后,等待服务器的确认信息。

下面是客户端发送SYN包的代码实现:

// 客户端发送SYN包
void send_syn_packet()
{
    // 向服务器发送SYN包
    tcp_packet_t packet = {
        .src_port = CLIENT_PORT,
        .dst_port = SERVER_PORT,
        .seq_num = rand(),
        .ack_num = 0,
        .flags = SYN_FLAG,
        .data_len = 0
    };
    send_packet(&packet);
}

  1. 确认连接请求

服务器接收到客户端发送的SYN包后,会发送一个ACK和SYN标

【计算机网络】UDP协议的完整代码 头文件 #include <stdio.h> #include <stdlib.h> #include <assert.h> #include <unistd.h> #include <string.h> #include <sys/socket.h> #include <sys/types.h> #include <arpa/inet.h> #include <netinet/in.h> 服务器 阅读详情

相关推荐

ESP8266WiFi模块使用(STA+连接TCP Server在单片机上使用)

ESP8266WiFi模块使用(STA+连接TCP Server在单片机上使用) 1.引脚说明 VCC连接正极,GND连接负极 RXD:数据的接收端 TXD:数据的发送端 RST: 复位,低电平有效 IO_0:用于进入固件烧写模式,低电平->烧写,高电平->运行模式(默认) 2.功能介绍 1、STA模式:该模块通过路由器连接网络,手机或者电脑实现该设备的远程控制。 2、AP模式:该模块...

qq_39600322的博客 5964

关于TCP和MQTT之间的转换

现在物联网流行的就是MQTT 其实MQTT就是在TCP的基础上建立了一套协议   可以看这个,本来我自己想用Wireshark监听一下,不过百度一搜索一大把,我就不测试了 https://blog.youkuaiyun.com/libaineu2004/article/details/78773610   所以说只要可以TCP连接了,然后只要知道了MQTT的协议,,,,直接就可以用TCP来当做MQTT来使用了...

weixin_33894640的博客 8162

socket实现TCP通信_TCP连接android与单片机(2016_03_21)

socket实现TCP通信_android

gao2419956747的博客 4380

Springboot整合netty框架实现终端、通讯板子(单片机)TCP/UDP通信案例

如何springboot和netty案例的源代码 一个springboot整合netty框架的开发小案例, 实现服务端与单片机终端实时通信的通讯架构案例。 物联网通信给板子下发指令案例 附带源码及整合流程步骤

Feify博客 1万+

esp8266系列学习(三)——单片机+esp8266获取天气信息

单片机利用8266获取天气信息 1、esp8266从联网到云端取数据的原理 2、使用esp8266模块获取天气的AT指令设置方法 (1)使用串口发送指令AT+CWMODE=1设置模块Wi-Fi应用模式为Station模式; (2)发送指令AT+RST重启模块使应用模式更改生效; (3)发送指令AT+CWJAP =”ssid”,”pwd”连接AP; ...

weixiao的博客 1万+

C51编程25-应用篇(单片机与电脑端实现wifi通讯)

单片机使用ESP-01S wifi模块与电脑端进行数据通讯。

qq_34343637的博客 1万+

TCP数据通信在单片机中的实现

需要注意的是,tcp_write函数只是将数据加入发送缓冲区,不会立即发送,需要等待TCP协议栈进行数据传输。同时,在接收数据时,也要注意数据可能会被分成多个分片(segment),需要进行合并。其中,需要指定连接的远程IP地址和端口号,以及本地端口号。TCP/IP协议是网络通信中最常用的一种协议,而TCP作为其中最重要的一部分之一,承担着可靠传输和流控制的责任。以上就是在单片机中使用TCP协议进行数据通信的基本步骤,具体实现要根据具体应用场景进行调整和优化。在使用TCP协议之前,需要先初始化网络。

weGuru的博客 929

TCP通信协议在单片机中的图解解析

TCP(Transmission Control Protocol)是一种基于连接的、可靠的传输层协议,广泛应用于互联网中的数据传输。在单片机中,使用TCP通信协议可以实现与其他设备的可靠数据交换。本文将详细解析TCP通信协议在单片机中的实现,并提供相应的源代码示例。本文详细解析了TCP通信协议在单片机中的实现,并提供了相应的源代码示例。通过使用TCP协议,单片机可以实现与其他设备之间的可靠数据传输。通过以上步骤,我们可以在单片机中实现TCP通信协议。这使得单片机能够与其他设备进行可靠的数据交换。

LqmSchedule的博客 346

day01(单片机高级)单片机控制ESP8266连接TCP

单片机控制ESP8266连接TCP

QR70892的博客 1362

Python量化投资入门教程:从零构建你的第一个交易策略

量化投资教程以数学模型和计算机程序实现超额收益,选用Python工具链完成数据获取、策略构建及回测。通过移动平均线交叉策略示例,展示数据预处理、信号生成、收益计算及可视化全流程,结合收益率、最大回撤和夏普比率评估策略,并建议参数优化与策略融合提升稳健性。

ylmx5201314的博客 2461

【AI之路】cmd命令行通过Huggingface镜像站快速下载模型文件的方法

Hugging Face Hub 是分享机器学习模型、演示、数据集和指标的首选之地。huggingface_hub 库可以轻松下载Huggingface上有用的模型和数据集元数据。但大模型文件通常较大,国内下载太慢,那有没有高效便捷的方法?这个当然必须有!看到了吗?只是添加一个参数,下载大模型就搞定了。当然也可以使用python程序来下载。具体见前期博文:【AI之路】使用huggingface_hub通过huggingface镜像站hf-mirror.com下载大模型(附代码,实现大模型自由)

IT里的交易员-博客 1861

基于FreeRTOS与MQTT的物联网技术应用系列——步进电机控制(三)SD卡驱动、FatFS等的移植和ini配置文件读取的实现

本文实现了基于STM32F107VC的金牛开发板的基于SPI模式的SD卡驱动和FatFS的移植,以及利用minini库对ini配置信息文件进行读取。

sqshining的专栏 2139

芯片良率提升:从设计到制造的系统性工程实践

在半导体制造领域,良率是衡量生产效率和成本控制的核心指标,直接关系到芯片的经济效益与市场竞争力。其本质是合格芯片占总产出芯片的百分比,提升良率需要从设计源头到制造末端的全流程协同优化。从技术原理看,它涉及可制造性设计、工艺过程控制、缺陷检测与根因分析等多个复杂环节,尤其在先进制程下,随机缺陷和参数变异成为主要挑战。其技术价值不仅在于降低单颗芯片成本,更能加速产品上市、保障可靠性,并成为企业技术实力的关键体现。应用场景贯穿智能手机、数据中心、自动驾驶和人工智能等所有高端芯片领域。本文将结合【芯片制造】与【良率

weixin_42526068的博客 636

Spring Boot 实现多图片上传并回显,涨姿势了~

上传 Controller的代码非常简单,由于用了SpringMVC框架,所以直接用MultipartFile来接即可。由于是多图片上传所以用数组来接。此处应该注意参数名应该和<input>中的name值相对应: @RequestMapping("/pic") @ResponseBody publicResponseEntity<String>pic(MultipartFile[]pictures)throwsException{ ResponseEnti...

weixin_54556126的博客 894

Zynq UltraScale+网络加速方案:用AXI Ethernet Subsystem实现2.5G吞吐量的配置秘籍

本文详细介绍了在Xilinx Zynq UltraScale+平台上使用AXI Ethernet Subsystem实现2.5Gbps网络吞吐量的配置方法。通过硬件设计优化、Vivado工程配置、Linux驱动调优及性能测试等关键步骤,为工业视觉和5G前传等高速网络应用提供可靠解决方案。

weixin_30485379的博客 615

Onnxruntime之YOLOP部署过程记录

魔改YoloP部署过程记录

如果想成为中心,那么就到中心去吧。 1931

芒果YOLO11改进23:主干Backbone篇GhostNet:原创改进高效 GhostNet 网络,华为出品,打造全新检测器

主干Backbone篇GhostNet:原创改进高效 GhostNet 网络,华为出品,打造全新检测器

包括YOLOv5、YOLOv7、YOLOv8等模型改进 408

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

Outlook Express 6 (OE6) for Win7/Win8/Win10

英文版 Outlook Express6.0, 兼容Win7/Win10/WinXP,解压就可用。

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: 单片机键盘输入程序
下一篇: 疯狂传感器篇:打造智能物联网平台,结合Mega、ESP、烟雾传感器MQ2、酒精传感器MQ3和氧化碳传感器MQ,实现数据监测与显示
普通网友
博客等级 码龄3年 73粉丝 0原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值