【翻译】压缩Windows XP中的ServicePackFiles/i386文件夹

压缩WindowsXPServicePackFiles
               

Compress the ServicePackFiles/i386 folder in Windows XP


压缩Windows XP中的ServicePackFiles/i386文件夹


http://techrepublic.com.com/5100-10877_11-5816838.html?tag=nl.e064

by  Greg Shultz
作者:Greg Shultz
翻译:PurpleEndurer

Keywords:Windows XP | Microsoft Windows | Operating systems

Takeaway:
After installing Windows XP SP2, you'll notice a set of folders inside of the Windows folder called ServicePackFiles/i386 in which the OS keeps copies of all the main OS files replaced by SP2. Check out how you can reduce the disk space this folder occupies from 530MB to 200MB.
概述
安装Windows XP SP2后,你将注意到Windows文件夹里的一个名为ServicePackFiles/i386的文件夹集,操作系统在里面保存了所有被SP2替换了主要的操作系统文件拷贝。你能将这个文件夹的空间占用从530MB减少到200MB。


When you install SP2 on a Windows XP system, the installation procedure actually creates a set of folders inside of the Windows folder called ServicePackFiles/i386 in which the operating system keeps copies of all the main operating system files replaced by SP2. This folder is then used by Windows File Protection in the event that a crucial system file needs to be replaced. In addition, the operating system uses the ServicePackFiles/i386 folder to store those files that are needed to install optional Windows components that aren't installed by default. The ServicePackFiles/i386 folder occupies around 530MB of disk space.

当你在Windows XP系统上安装SP2,安装过程其实在Windows文件夹里创建了一个名为ServicePackFiles/i386的文件夹集,操作系统在里面保存了所有被SP2替换了主要的操作系统文件拷贝。这个文件夹在关键系统文件需要被替换时用于Windows文件保护。另外,操作系统使用ServicePackFiles/i386文件夹来存放非默认安装的、可选择的Windows组件的文件。ServicePackFiles/i386文件夹占用了大约530MB磁盘空间。

You can regain some of the disk space if your hard disk is formatted with the NTFS file system by compressing the ServicePackFiles/i386 folder with NTFS compression. In fact, you can expect to regain about 200MB of disk space. To do so, follow these steps:

如果你的硬盘是用NTFS文件系统格式化的,你可以使用NTFS 压缩功能压缩ServicePackFiles/i386文件夹来获得一些磁盘空间。操作步骤如下:

  1. Right-click the ServicePackFiles folder and select the Properties command.
    右击ServicePackFiles文件夹,选择属性命令
  2. In the Attributes section of the General tab, click the Advanced button.
    在“常规”选项卡的属性段,点击“高级”按钮
  3. In the Advanced Attributes dialog box, select the Compress Contents To Save Disk Space check box and click OK.
    在“高级属性”对话框,选定“压缩内容以便节省磁盘空间”框,点击“确认”按钮。
  4. When you return to the Properties dialog box, click OK.
    当你回到“属性”对话框,点击“确认”按钮。
  5. When you see the Confirm Attribute Changes dialog box, select the Apply Changes To This Folder, Subfolders And Files option button and click OK.
    当你看到确认属性改变对话框,选择“应用改变到这个文件夹,字文件夹和文件”选项按钮,点击“确认”按钮。

(Note: It will take a few minutes for Windows XP to compress the folder.)
(注意:Windows XP压缩文件夹需要一定的时间。)

Once the folder is compressed, it will take up less space, yet it will still be accessible for Windows File Protection operations and the installation of optional components.

一旦文件夹压被压缩了,它将少占用空间,然而它仍然可以被Windows文件保护操作和可选组件安装程序访问。

           

再分享一下我老师大神的人工智能教程吧。零基础!通俗易懂!风趣幽默!还带黄段子!希望你也加入到我们人工智能的队伍中来!https://blog.youkuaiyun.com/jiangjunshow

经常服务器重装后机房老是忘记给装IIS了没办法得自已装,下载这个 i386 文件夹解压后就可以自已安产装IIS等组件了. IIS5.1安装说明: 一: IIS 5.1版本适用于Windows XP_SP1、XP_SP2、XP_SP3 二: ISS 5.1安装步骤(各版本IIS都可以按照该方法安装,以IIS5.1安装至Windows xp_SP3为例) 1.依次打开 左下角的"开始"菜单----控制面板----选择"添加/删除程序",打开"添加/删除程序"窗体 ----点击窗体左侧"添加/删除Windows组件"(A) 2.解压IIS 压缩包,在打开的"Windows组件向导"窗体中,将"Internet 信息服务(IIS)"前面 小方框钩选上----点击下一步-----在弹出的"插入磁盘"窗体中,点击"确定"按扭------ 将解压后的IIS 5.1路径(如D:\飞翔下载\IIS\iis5.1xp)复制到"文件复制来源"输入框中, 如再遇到需要"插入光盘"之类的提示,继续粘贴该IIS路径即可,直到完成安装,当出现安装 完成提示按扭时,点击"完成"按扭关团向导,即可完成安装. 三: 问题及解决方案 1.IIS安装过程中,如果出现某些文件无法复制,则可能是该IIS不适合你的系统,请换一个 对应于系统的IIS,IIS版本说明如下. Windows XP_SP1 ,XP_SP2 ,XP_SP3 系统 适用 IIS5.1版本 Windows 2000 系统 适用 IIS5.0 版本 Windows server 2003系统 适用 IIS 6.0 版本 Windows Server 2008 ,Vista 系统 适用 IIS 7.0 版本 2.能完成IIS的安装即无法正常使用等问题,部分原因如下 可能与迅雷等网络工具TCP 端口产生冲突,打开控制面板----双击"性能和维护"打开--- "管理工具"----"Internet 信息服务"---"网站"---"选择"默认网站"右击---选择"属性" 菜单---在默认网站属性窗体分页框内选择"网站"标题---"TCP 端口" ----设为80即可完 成(IIS 默认80端口.如果使用其它端口,如8080,测试时需http://localhost:8080). 3.IIS 80端口被占用的解决方法 cmd 命令窗口----输入netstat -abn ->c:/port80.txt然后到c盘port80.txt文件中找到 占用80端口的程序pid,记下pid.打开任务管理器,点击"查看"/选择列,勾选"PID(进程标识 符)",然后单击"进程"标签,找到80端口对应的pid,就可以看到是哪个程序占用的了,更改 这个程序的port,再重启这个程序,使更改生效.再次启动iis.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值