may 22,2011

Sometimes you need to look back, otherwise you will never know what you have lost in the way of forever searching.

偶尔要回头看看,否则永远都在追寻,而不知道自己失去了什么。

The device is running! ############################################## <Huawei> May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/CARD_ENABLE(l)[0]:Board 0 card 0 h as been available. May 27 2025 16:38:05-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5 .25.191.3.1 configurations have been changed. The current change number is 3, th e change loop count is 0, and the maximum number of records is 4095. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[1]:Interface Ethernet 0/0/1 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[2]:Interface Ethernet 0/0/2 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[3]:Interface Ethernet 0/0/3 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[4]:Interface Ethernet 0/0/4 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[5]:Interface Ethernet 0/0/5 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[6]:Interface Ethernet 0/0/6 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[7]:Interface Ethernet 0/0/7 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[8]:Interface Ethernet 0/0/8 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[9]:Interface Ethernet 0/0/9 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[10]:Interface Etherne t0/0/10 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[11]:Interface Etherne t0/0/11 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[12]:Interface Etherne t0/0/12 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[13]:Interface Etherne t0/0/13 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[14]:Interface Etherne t0/0/14 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[15]:Interface Etherne t0/0/15 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[16]:Interface Etherne t0/0/16 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[17]:Interface Etherne t0/0/17 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[18]:Interface Etherne t0/0/18 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[19]:Interface Etherne t0/0/19 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[20]:Interface Etherne t0/0/20 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[21]:Interface Etherne t0/0/21 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[22]:Interface Etherne t0/0/22 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[23]:Interface Gigabit Ethernet0/0/1 has been available. May 27 2025 16:38:05-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[24]:Interface Gigabit Ethernet0/0/2 has been available. May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[25]: Ethernet0/0/1: change status to up May 27 2025 16:38:06-08:00 Huawei %%01IFNET/4/IF_STATE(l)[26]:Interface Vlanif1 has turned into UP state. May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[27]: Ethernet0/0/2: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[28]: Ethernet0/0/3: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[29]: Ethernet0/0/4: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[30]: Ethernet0/0/5: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[31]: Ethernet0/0/6: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[32]: Ethernet0/0/7: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[33]: Ethernet0/0/8: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[34]: Ethernet0/0/9: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[35]: Ethernet0/0/10: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[36]: Ethernet0/0/11: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[37]: Ethernet0/0/12: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[38]: Ethernet0/0/13: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[39]: Ethernet0/0/14: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[40]: Ethernet0/0/15: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[41]: Ethernet0/0/16: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[42]: Ethernet0/0/17: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[43]: Ethernet0/0/18: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[44]: Ethernet0/0/19: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[45]: Ethernet0/0/20: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[46]: Ethernet0/0/21: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[47]: Ethernet0/0/22: chang e status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[48]: GigabitEthernet0/0/1: change status to down May 27 2025 16:38:06-08:00 Huawei %%01PHY/1/PHY(l)[49]: GigabitEthernet0/0/2: change status to down May 27 2025 16:38:07-08:00 Huawei %%01PHY/1/PHY(l)[50]: Ethernet0/0/2: change status to up May 27 2025 16:38:07-08:00 Huawei %%01PHY/1/PHY(l)[51]: Ethernet0/0/3: change status to up如何解决
05-28
源码来自:https://pan.quark.cn/s/41b9d28f0d6d 在信息技术领域中,jQuery作为一个广受欢迎的JavaScript框架,显著简化了诸多操作,包括对HTML文档的遍历、事件的管理、动画的设计以及Ajax通信等。 本篇文档将深入阐释如何运用jQuery达成一个图片自动播放的功能,这种效果常用于网站的轮播展示或幻灯片演示,有助于优化用户与页面的互动,使网页呈现更加动态的视觉体验。 为了有效实施这一功能,首先需掌握jQuery的核心操作。 通过$符号作为接口,jQuery能够迅速选取DOM组件,例如$("#id")用于选取具有特定ID的元素,而$(".class")则能选取所有应用了某类class的元素。 在选定元素之后,可以执行多种行为,诸如事件监听、样式的变更、内容的更新以及动画的制作等。 关于“一个基于jQuery的图片自动播放功能”,首要任务是准备一组图片素材,这些素材将被整合至一个容器元素之中。 例如,可以构建一个div元素,将其宽度设定为单张图片的尺寸,再借助CSS实现溢出内容的隐藏,从而构建出水平滚动的初始框架。 ```html<div id="slider"> <img src="image1.jpg" alt="Image 1"> <img src="image2.jpg" alt="Image 2"> <!-- 更多图片内容... --></div>```接着,需要编写jQuery脚本以实现图片的自动切换。 这通常涉及到定时器的运用,以设定周期性间隔自动更换当前显示的图片。 通过使用`.fadeOut()`和`.fadeIn()`方法,能够实现图片间的平滑过渡,增强视觉效果。 ```javascript$(document).re...
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值