关于nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use)

最新推荐文章于 2025-03-02 19:53:10 发布
最新推荐文章于 2025-03-02 19:53:10 发布
阅读量4.8k 收藏 1
点赞数
CC 4.0 BY-SA版权
分类专栏： Linux运维
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/filanphper/article/details/88396988
本文介绍了一种常见的Nginx服务器配置问题，即443端口被占用导致的重启失败。通过使用netstat命令检查端口占用情况，并关闭占用443端口的Vultr节点，最终成功解决了Nginx服务器的重启问题。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

今天在Nginx服务器配置阿里云CA证书，证书配置好之后，重启服务器的时候提示这样的一个错误
nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use)
提示443端口被占用

看一哈什么进程占用了端口netstat -ntpl
在这里插入图片描述
之前在服务器上配置过Vultr 节点，占用了443
关闭节点：ssserver -c/etc/shadowsocks.json -d stop

再netstat -ntpl 一下
在这里插入图片描述
完美解决
服务器顺利重启

解决nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)以及nginx 502 Bad Gateway解决方法
念兮为美
04-28 6590
解决nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)，以及nginx 502 Bad Gateway解决方法
nginx启动服务提示98: Address already in use错误的解决
09-30
主要给大家介绍了nginx启动服务提示98: Address already in use错误的解决方法，文中介绍的非常详细，对大家具有一定的参考学习价值，需要的朋友们下面来一起看看吧。
【Nginx报错】记录一次Nginx报错：nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use)
qq_66877333的博客
01-07 1952
记录一次Nginx报错：nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use) nginx: [emerg] still could not bind()
nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use) lsof -i: 没有内容
唐心的博客
09-16 289
yum remove hostguard 华为的。没用 最近作了啥-》cerbot-》cerbot 在nginx.conf里写了多个listen 433
nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use)
RodJohnson_523391的专栏
06-26 2029
nginx查看安装了哪些模块 [url]http://www.blogjava.net/anchor110/articles/414176.html[/url] nginx: [emerg] bind() to 0.0.0.0:443 failed (10013: An attempt was made to access a socket in a way forbidden by it...
启动nginx报错nginx [emerg] bind() to 0.0.0.080 failed (98 Address already in use)
李白
03-02 733
拒绝显示别名，能显示数字的全部转化成数字，（tcp）仅显示tcp相关选项，显示建立相关链接的程序名，仅列出有在 Listen (监听) 的服務状态。一开始以为是端口被占用，停掉对应的端口进程就行了，于是挨个停一遍。然后停掉对应的进程，注意 PID 列才是对应的进程id。完了发现不对啊，并没有作用，启动还是报这个错。那看看网络相关的端口，使用如下命令查找。使用 PID 列下的进程id停掉进程。可以看到这几个端口都是同一个进程。使用如下命令查看对应占用进程端口。那看看80端口跑了什么。
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] still could not bind()如何解决
最新发布
07-18
首先，用户的问题是中文的："nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) ... nginx: [emerg] still could not bind()如何解决"。意思是Nginx绑定到0.0.0.0:80失败，因为地址已经被...
nginx: [error] open() "/usr/local/nginx/logs/nginx.pid" failed (2: No such file or directory) [root@i-isabrlv8 sbin]# /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use) nginx: [emerg] bind() to [::]:443 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use) nginx: [emerg] bind() to [::]:443 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use) nginx: [emerg] bind() to [::]:443 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use) nginx: [emerg] bind() to [::]:443 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use) nginx: [emerg] bind() to [::]:443 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) nginx: [emerg] still could not bind()
07-17
当 Nginx 启动时报错 `bind() to 0.0.0.0:80 failed (98: Address already in use)` 或涉及 443 端口时，通常表示该端口已被其他进程占用。这种问题常见于系统中已有 Web 服务（如 Apache、其他 Nginx 实例）正在...
nginx启动时提示端口被占用nginx: [emerg] bind() to 0.0.0.0:443 failed (98: Address already in use)
meimeib的博客
07-18 6723
场景 启动nginx的时候提示443端口被占用，如下图 分析 443端口被占用，查看是什么进程占用了443，并把其杀死掉 解决办法 使用fuser -n tcp 命令查看占用该端口的PID列表 netstat -apn//查看所有 netstat -ltunp//查看所有 fuser -n tcp 443//查看具体端口 2. 使用kill PID删除进程 kill 2330 3. 重启nginx nginx -s reloaad 4.查看nginx是否启动成功 nginx -t
nginx: [emerg] bind() to 0.0.0.0:4433 failed (98: Address already in use)、
wangjun5159的专栏
04-22 1257
今天遇到两个nginx问题`nginx: [emerg] bind() to 0.0.0.0:4433 failed (98: Address already in use)` 和```no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking```
nginx: [emerg] bind() to 0.0.0.0:4433 failed (98: Address already in use)
kuangpengfei的博客
03-16 7206
提示：查询Nginx进程：ps -aux | grep nginx。 一、使用sudo systemctl restart nginx 重启Nginx服务出现以下错误： [root@Zcgl_Web1_Dev nginx]# sudo systemctl restart nginx Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx..
nginx报bind() to 0.0.0.0:443 failed错导致无法启动
liuqingup的专栏
06-25 3620
最近遇到了一个问题，启动Nginx时出现了"bind() to 0.0.0.0:443 failed"的错误，导致Nginx无法启动。
nginx启动服务提示98: Address already in use 解决
weixin_39921970的博客
04-09 8584
问题描述： 环境： linux centos6,7;php >5.6;nginx 1.18 域名已备案已解析，开放ping，且正常，访问网址无法访问 解决： 步骤一：查看重启nginx： [我的服务器 ~]# service nginx restart Stoping nginx... nginx is not running. Starting nginx... nginx: [emerg] bind() to 0.0.0.0:888 failed (98: Address alr..
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:443的解决办法
热门推荐
qq_36250578的博客
07-10 1万+
关于网站添加SLL证书后，在Apache服务器在启动时。启动命令：service httpd restart偶然会出现如下报错(98)Address already in use: make_sock: could not bind to address 0.0.0.0:443字面理解是443端口被占用；注：443是https的端口原因分析：443占用，不能再监听一个443端口了。解决办法：1. ...
【Nginx】bind() to 0.0.0.0:443 failed 错误排查方法
daohangtaiqian的博客
02-09 1621
在windows10 系统上启动打包项目起不来，一看是nginx端口被占用了。所以要干掉这个程序，但是万一是重要系统在使用443端口呢，所以一定要看清楚。在这里能看到所占用端口的名称信息：如果需要结束，右键结束就好了。
nginx 无法启动：bind() to 0.0.0.0:443 failed
牛奔的博客
12-04 4692
bind to 0.0.0.0:443 failed.其实就是443端口被其它程序占用，要结束占用443端口导致nginx不能启动的应用。 CMD: 1.查看所有程序使用的端口netstat -aon 也可以使用netstat -aon|findstr "443"，直接找到使用443端口的程序： 可以看到PID为6416的程序占用了本机443端口。 接下来找到进程号为6416的程序，结束...
nginx: [error] 24361#0: invalid PID number ““ in “/run/nginx.pid“ 与(98: Address already in use)
ex_xyz的博客
10-15 428
nginx: [error] 24361#0: invalid PID number "" in "/run/nginx.pid" 与启动时遇到错误(98: Address already in use)的解决方案
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值