本文介绍如何通过DD-WRT固件配置路由器以访问Modem设置。具体步骤包括使用正确的IP地址范围、通过命令行配置网络接口及启用NAT伪装。适用于希望深入配置家庭网络环境的用户。
http://www.dd-wrt.com/wiki/index.php/Access_To_Modem_Configuration
上面是DD-WRT官网的说明。下面直接贴上。
| The way to follow Replace the 10.0.0.2 with an IP in the same range as the modem. If your modem is 10.0.0.1, you should use 10.0.0.2. If your modem is 192.168.0.1, use 192.168.0.2 Go to Administration -> Commands Enter ifconfig `nvram get wan_ifname`:0 10.0.0.2 netmask 255.255.255.0 and click on Save Startup Enter iptables -t nat -I POSTROUTING -o `nvram get wan_ifname` -j MASQUERADE and click on Save Firewall |
扫一扫
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
