QQ空间迁移_【Frame_relay子接口的两种配置方法】

Frame relay子接口的两种配置方法

2009-05-18 17:31:39

配置Frame relay子接口

R1:R3 103:301
R2:R3 203:302

1，多点子接口R1
conf t
int s 0
encap frame
no arp f
no frame inver
ip ad 10.1.1.1 255.255.255.0
frame map ip 10.1.1.3 103 b
frame map ip 10.1.1.2 103 b
no shut
end

R2
conf t
int s 0
encap f
no arp f
no frame inver
ip ad 10.1.1.2 255.255.255.0
frame map ip 10.1.1.3 203 b
frame map ip 10.1.1.1 203 b
no shut
end

R3
conf t
int s 0
encap f
no arp f
no frame inv
no shut
exit
int s 0.1 m
no arp f
no frame inver
ip ad 10.1.1.3 255.255.255.0
frame map ip 10.1.1.1 301 b
frame map ip 10.1.1.2 302 b
end

R1#ping 10.1.1.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.3, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/66/228 ms
R1#ping 10.1.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/111/372 ms

R2#ping 10.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/140/424 ms
R2#ping 10.1.1.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.3, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/79/164 ms

R3#ping 10.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/82/224 ms
R3#ping 10.1.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 12/75/232 ms

2，点到点子接口R1
conf t
int s 0
encap f
no arp f
exit
int s 0.1 point-to-point
ip ad 10.1.1.1 255.255.255.0
frame interface-dlci 103
exit
no shut
end

R2 conf t
int s 0
encap f
no arp f
exit
int s 0.1 point-to-point
ip ad 10.1.2.2 255.255.255.0
frame interface-dlci 203
exit
no shut
end

R3
conf t
int s 0
encap f
no arp f
no shut
exit
int s 0.1 point-to-point
ip ad 10.1.1.3 255.255.255.0
frame interface-dlci 301
exit
int s 0.2 point-to-point
ip ad 10.1.2.3 255.255.255.0
frame interface-dlci 302
end

R1#ping 10.1.1.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.3, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 12/44/100 ms

R2#ping 10.1.2.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.2.3, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/72/216 ms

R3#ping 10.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/69/204 ms
R3#ping 10.1.2.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.2.2, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/92/192 ms
|xGv00|fcc8d4de8197f69fde70263fb4d52380

评论(0)

2, timeout is 2 seconds:
!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/92/192 ms
|xGv00|fcc8d4de8197f69fde70263fb4d52380

评论(0)