[Eclipse] The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.

别再手动切换了!用SP3485+三极管搞定RS485自动收发电路(附完整原理图) 本文详细介绍了如何利用SP3485芯片和三极管设计RS485自动收发电路,解决传统手动切换带来的IO资源占用和软件复杂度问题。通过原理分析、电路设计拆解和实战注意事项,帮助工程师打造稳定可靠的自动收发通信模块,显著提升系统性能和可靠性。 阅读详情

Dev@Free

zJun's Tech Weblog

[Eclipse] The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....

来自: i have only belief--wjw



在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....,查找的解决办法如下:

一:
It is indirectly referenced from required .class file

原因:你正要使用的类调用了另一个类,而这个类又调用了其他类,这种关系可能会有好多层。而在这个调用的过程中,某个类所在的包的缺失就会造成以上那个错误。

解决方法:导入缺失的包

二:
The project was not built since its build path is incomplete. Cannot find the class file for java.lang.Object. Fix the build path then try building this project
The type java.lang.Object cannot be resolved. It is indirectly referenced from required .class files

出現以上訊息的原因是因為你裝了多個版本的jre或jdk的關係。本來Eclipse在建立專案時,會自動參照你的jre路徑,但多個版本就沒辦法了。
你只能手動建立…
1. 進入window\preferences\java\Installed JREs
1)按Add
2)輸入JRE Name, 例JDK1.5.0.03
3)JRE home directory, 選擇安裝的路徑
4)按OK
2. 進入Project\properties\Java Bulid Path
1)Add library
2)選JRE System Library後按Next
3)選workplace default JRE後按finish

[QMT量化交易小白入门]-二十四、年化收益47%的全球核心资产轮动策略(含代码解析) m_days = 25 #动量参考天数period=200m_days被设置为25,表示动量参考的天数为25天;period被设置为200,用于指定获取市场数据的周期长度。 阅读详情

相关推荐

Quartus安装Altera USB-Blaster安装驱动程序出现问题(代码39)的解决办法

Quartus安装Altera USB-Blaster安装驱动程序出现问题(代码39)的解决办法

MCU_HOT的博客 1万+

[Eclipse] The type XXX cannot be resolved. It is indirectly referenced from required .class files错误....

在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....,查找的解决办法如下: 一: It is indirectly referenced from required .class file 原因:你正要使用的类调用了另一个类,而这个类又调...

web开发自学 1460

固定翼飞行器建模(二)——MATLAB/Simulink建模、配平及线性化

MATLAB/Simulink固定翼建模、配平及线性化。

2302_80148937的博客 1万+

The type *** cannot be resolved. It is indirectly referenced It is indirectly referenced from requi

The type *** cannot be resolved. It is indirectly referenced 或者 The type *** cannot be resolved. It is indirectly referenced from required .class files   错误提示是以上两种情况,一般是jar包没有导入成功。 若你不是maven项目,那就...

zich77521的博客 7143

使用示波器通过串口抓取数据波形

当我们在软件上发送一个数据,需要在示波器上正确的显示发送数据的波形时,这个过程是需要按照软件上串口配置的参数对示波器进行调节的,本次使用的示波器(型号为RIGOL DS1102Z-E)外观如下图所示,本次对采集波形的调节主要用到以下几处按钮。具体是两条导线T+连接R+、T-连接R-,连接完毕后,打开XCOM软件,首先配置好参数后打开串口,如下所示,若在发送窗口发送数据在接收窗口可以实时显示到的话,证明串口的收发功能是正常的。1.CH1、CH2是示波器上的两个采集通道,本次波形采集使用的是CH1通道。

weixin_58061628的博客 1万+

嵌入式人工智能(18-基于树莓派4B的继电器JQC-3FF-S-Z)

本次实验的输出端控制不会接强电,就用LED灯来模拟即可,由于我那个流水灯模块是低电平点亮,所以接线稍有不同,同学们注意。只有继电器吸合,输出端的NO与COM就导通,给LED低电平然后就亮,否则继电器断开,NO与COM不导通,LED不亮。原理都一样,控制电流的接通与断开,这个模块看起来还简单点,毕竟还有2个指示灯,下端IN如接上电源红灯亮,继电器动作有电流通过绿灯亮。在实际应用中,可以通过编程控制继电器的通断状态,例如在Python编程中设置继电器模块的通断时间,从而实现自动化控制。

u010152658的博客 2531

杂(三)-The type java.lang.Object cannot be resolved It is indirectly referenced ...

The type java.lang.Object cannot be resolved. It is indirectly referenced from required .class files 当你在Eclipse引用不同版本号JDKproject时会发生该问题。因为你开发环境中应用了多个版本号的JDK 或JRE导致的。Eclipse会依照最初的开发环境默认选择相...

weixin_33672400的博客 434

第 4 课 树莓派5的换源与中文输入法

树莓派换源、中文输入法的安装

嵌入式老牛的博客 2288

在eclipse中新建java问题报错:The type XXX cannot be resolved. It is indirectly referenced from required .clas...

在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....,查找的解决办法如下:一:It is indirectly referenced from required .class file 原因:你正要使用的类调用了另一个类,而...

weixin_30692143的博客 1322

ARIMA模型的R实现

1.模型简介 ARIMA模型,全称差分自回归移动平均模型。可以看作是差分运算和ARMA模型的结合。主要是针对具有线性趋势的非平稳的时间序列,来进行建模预测。 ARIMA模型的形式如下: Φ(B)∇

heirenmin的博客 1万+

Open3D 点到面的ICP配准算法【2025最新版】

点到面的ICP(python版本)博客长期更新,本文最近一次更新时间为:2025年2月2日,代码已更新至Open3D 0.18.0版本。

点云侠的博客 38万+

[Eclipse]The type XXX cannot be resolved. It is indirectly referenced from required .class files

在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....,查找的解决办法如下: 一: It is indirectly referenced from required .class file 原因:你正要使用的类调用了另一...

dongbao0221的博客 285

成功解决raise Py4JError py4j.protocol.Py4JError: py4j.protocol.Py4JError: Could not find py4j jar at 

成功解决raise Py4JError("Could not find py4j jar at {0}".format(jarpath)) py4j.protocol.Py4JError: Could not find py4j jar at 目录 解决问题 解决思路 解决方法 1、第一步安装jdk 2、第二步安装或升级py4j 解决问题 raise Py4JError("Could not find py4j jar at {0...

头部AI社区如有邀博主AI主题演讲请私信—心比天高,仗剑走天涯,保持热爱,奔赴向梦想!低调,专注,谦虚,自律,反思,成长,还算比较正能量的博主,公益免费传播…内心特别想在AI界做出一些可以推进历史进程影响力的技术(兴趣使然,有点小情怀,也有点使命感呀 4627

在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误

一:It is indirectly referenced from required .class file 原因:你正要使用的类调用了另一个类,而这个类又调用了其他类,这种关系可能会有好多层。而在这个调用的过程中,某个类所在的包的缺失就会造成以上那个错误。解决方法:导入缺失的包二:The project was not built since its build path is incompl

my_Captain的博客 859

IDEA的使用指南

IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.

霍尼韦尔SoftMaster使用说明

霍尼韦尔SoftMaster使用说明

Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误...

原因:某个项目需要的jar包没有导入 参考文章:http://www.blogjava.net/zJun/archive/2007/10/16/153374.html

weixin_34074740的博客 1455

ssm框架搭建

这个是一个在idea上成功跑起来的ssm框架项目,保存在这里方便以后使用直接下载

The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.

在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....,查找的解决办法如下: 一:  It is indirectly referenced from required .class file 原因:你正要使用的类调用了另一个

linyeban的博客 1万+

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

[Eclipse报错] The type XXX cannot be resolved. It is indirectly referenced from required .class files

The type XXX cannot be resolved. It is indirectly referenced from required .class files 出现这个错误,项目原先的编译的jdk版本和目前eclipse的默认jdk版本不一样 解决办法: 选中项目>>Properties>>Java Build Path>>Add Library>>JRE System Li

Eric的专栏 1541

the type xxx cannot be resoved,It is indirectly referenced from required .class files错误.....

在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....,查找的解决办法如下: 一: It is indirectly referenced from required .class file 原因:你正要使用的类调用了另一个类,而这

cpf506497746的专栏 465

The type xxx cannot be resolved. It is indirectly referenced from required .class files xxx

在eclipse中导入项目,出现以下两种error Description Resource Path Location Type The project was not built since its build path is incomplete. Cannot find the class file for org.hibernate.LockOptions. Fix the build ...

OrangQceee的博客 1163

The type XXX cannot be resolved. It is indirectly referenced from required .class files错误

在Eclipse中遇到The type XXX cannot be resolved. It is indirectly referenced from required .class files错误.....,查找的解决办法如下:

saymorning_world的专栏 787

rcp(插件开发)The type XXX cannot be resolved. It is indirectly referenced from required .class files解决办法

如果你在使用插件开发时遇到这个问题: The type org.eclipse.core.resources.IFile cannot be resolved. It is indirectly referenced from required .class files 你应该在当前的依赖项加入类所在的插件包即可。

Hello Eclipse Plugin 黑夜 2484

淘淘商城项目错误之The type XXX cannot be resolved. It is indirectly referenced from required .class files错误

做到测试使用分页插件来获取数据的时候,突然发现好几个项目报错了,都是报TbItem这个类指定模糊,但是在Eclipses上又能跳转过去。。。 解决方案:project clean 之后重新编译。没有问题。 ...

maoxiaohai123的博客 645
上一篇: The type org.springframework.beans.BeansException cannot be resolved. It is indirectly referenced fr
下一篇: spring如何解析通配符路径
javaPie
博客等级 码龄16年 1171粉丝 43原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值