UBUNTU 7.04 在IBM R51e 中启动缓慢的解决方案

邵钏

于 2007-09-30 22:29:00 发布

阅读量886

点赞数

CC 4.0 BY-SA版权

文章标签： ibm ubuntu system layer file

本文链接：https://blog.youkuaiyun.com/enzymer/article/details/1808474

本文解决了ThinkPad R51e在启动时加载ACPI模块及HAL导致的延迟问题。通过在内核选项中添加ec_intr=0参数，系统启动速度恢复正常，且电池监测等功能不受影响。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

I found it takes more than half a minute to load ACPI modules and start HALd on my Thinkpad R51e, the computer looks dead in these two steps:
Loading ACPI Modules ...
Starting Hardware abstraction layer hald ...

solve the problem:
file: /boot/grub/menu.list
"The good news is that as a workaround you can add ec_intr=0 to your kernel options. This worked for me. My system is back at full speed and battery monitor etc work fine, though I have to admit that I'm not sure what this option changes, but it's a better option than blacklisting the battery and ibm_acpi modules that I was doing before."

碰到这个问题好多次了，每次系统升级一次就要重新找一下解决方案，今天写在博客里，一劳永逸。