PTA 习题10-6 递归求Fabonacci数列 (10分)

【通信原理 入坑之路】—— 详解IQ调制以及星座图原理 文章目录一. IQ调制与解调的原理与过程二.PSK(相移键控)和IQ调制的关系:2.1 用IQ调制实现QPSK调制 一. IQ调制与解调的原理与过程 IQ调制的定义是:“IQ调制就是数据分为两路,分别进行载波调制,两路载波相互正交。I是in-phase(同相), q是 quadrature(正交)” 我们通过下面的示意图介绍IQ调制的过程: 首先,信号分成两路:I路和Q路(为了方便理解我们把这两... 阅读详情

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下:

f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。

函数接口定义

int f( int n );

函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。

裁判测试程序样例:

#include <stdio.h>

int f( int n );

int main()
{
    int n;

    scanf("%d", &n);
    printf("%d\n", f(n));

    return 0;
}

/* 你的代码将被嵌在这里 */

输入样例1:

6

输出样例1:

8

答案代码块

int f( int n ){
	if(n == 0){
		return 0;
	}else if(n == 1){
		return 1;
	}else{
		return f(n-2) + f(n-1);
	}
}
液冷方式介绍 如果将直径在1~100nm的颗粒悬置在传热流体(例如:水、乙烯、乙二醇等)中时,其传热能力会得到提升,因为大多数固体材料的热导率要大于液体,因此由颗粒、流体组成的混合物热导率也高于液体本身的热导率,由此制成的流体,我们称之为纳米流体。金属冷管的液体工质蒸散量几乎为0,而柔软材质的管道则会产生液体的蒸散,在封闭式循环系统中,为了弥补液体工质的蒸散,必须定期在系统中补充液体工质。——我们之前说过,材料的导电和导热的机制大致是类似的,所以导电能力更强的金属往往具有更好的导热能力。 阅读详情

相关推荐

从零到一:RK3588嵌入式开发中的SDK与MPP集成实战解析

本文详细解析了RK3588嵌入式开发中SDK与MPP(Media Process Platform)的集成实战,涵盖开发环境构建、SDK架构解析、MPP集成关键技术点及常见问题诊断。通过Qt5.12.10交叉编译环境配置和硬件加速优化,帮助开发者高效完成嵌入式视觉项目开发,特别适合边缘计算应用场景。

weixin_29189381的博客 510

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下:f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。

int main()int n;return 0;int s;if(n==0)s=0;s=1;elsereturn s;

2301_81258433的博客 1178

实战指南 | 快速修复Adobe Acrobat 2020安装过程中的常见注册表错误

本文提供了Adobe Acrobat 2020安装过程中遇到“无法打开键”注册表错误的详细修复指南。通过安全编辑注册表,精准定位并删除残留键值,可快速解决此常见安装报错,确保软件顺利安装。同时,文章也介绍了其他安装问题的应对策略与预防措施。

weixin_29200485的博客 560

PTA: 递归求Fabonacci数列 (10分)(C语言)

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( int n ...

空白的博客 6296

HDRnet——双边滤波和仿射变换的摇身一变

layer层数越多,下采样得到的图越小,low-level features的好处是最后的grid会更coarser,最后的特征图的感受野也越多,非线性更好,表达力更强。所以最终grid是5维的[B,in*out,n,H,W],permute之后是[B,H,W,n,in*out],B是batchsize,n表示对guide的量化级数,in*out表示每个cell的变换系数。这部分的处理对象是低分辨率图,利用CNN进行特征提取(局部和全局),最后fuse得到grid,这里面包含了变换的系数。

zcg1942的博客 1576

SpotBugs使用

spotbugs命令行参数解析

javajingling的专栏 2947

习题10-6 递归求Fabonacci数列

习题10-6 递归求Fabonacci数列

UUTL 1392

[南大ICS-PA2]PA2 - 简单复杂的机器:冯诺依曼计算机系统

mips32和riscv32的指令长度只有32位, 因此它们不能像x86那样, 把C代码中的32位常数直接编码到一条指令中. 思考一下, mips32和riscv32应该如何解决这个问题?加载立即数到寄存器的高20位,然后便可以是哟给你标准的立即指令来创建32位常量。在程序分析领域中,静态指令是指程序代码中的指令,动态指令是指程序运行过程中的指令,例如对于一下指令序列。位域,在小端机器上,先定义的在每个字节的低位,后定义的在每个字节的高位。,这是处理非法指令的宏,其定义在。指令,而下一条动态指令则是。

qq_42474104的博客 928

6-8 递归求Fabonacci数列

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下:f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。 函数应返回第个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 输出样例:...

m0_66460650的博客 2948

【乐企-工具篇】生成发票左上角二维码

【代码】【乐企-业务篇】生成发票左上角二维码。

九七的博客 707

【GameFramework框架】二、GameFramework框架介绍

Game Framework框架是由E大(Ellan Jiang)开源的一款基于Unity的通用游戏框架。Game Framework框架提供了游戏开发中常用的框架基础模块,将基础模型进行了封装,在资源管理和资源更新方面比较完善,可以大大加大开发进程,加快开发速度,并且还在在此此处上保证产品质量。实在是代码开发、框架学习、编程进阶、居家旅行哦不对,是提升自己的最佳实践。Game Framework框架。

优快云博客专家,Unity3D高级软件工程师,《Unity 3D从入门到实战》作者。 5848

PTA|《C语言程序设计(第3版)》习题10-6 递归求Fabonacci数列 (10分)

题目 本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( i...

烫烫烫的博客 1293

巡检领域红外热成像相机镜头焦距选择方法总结

摘要:巡检机器人红外热成像相机镜头焦距的选择需综合考虑检测距离、视场角、目标分辨率等核心要素。短焦距(4-6mm)适用于室内近距离巡检,中焦距(12-19mm)适合变电站等中等距离场景,长焦距(25-50mm)则用于光伏板等远距离检测。选型需遵循焦距计算公式f=SL×d,确保目标占据≥3×3像元,同时考虑机器人安装空间、环境适应性及软件联动需求。建议通过样机实测或仿真软件验证选型合理性,以实现对设备故障的精准识别。

start_up_go的博客 298

浙江大学 PTA 习题10-6 递归求Fabonacci数列 (10 分)

本题要求实现求Fabonacci数列项的函数。 Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( in...

songbai220 1万+

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

浙大 | PTA 习题10-6 递归求Fabonacci数列 (10分)

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1)(n≥2)f(n) = f(n - 2) + f(n - 1)(n≥2)f(n)=f(n−2)+f(n−1)(n≥2), 其中f(0)=0,f(1)=1f(0) = 0, f(1) = 1f(0)=0,f(1)=1 函数接口定义: int f( int n ); 函数f应返回第n...

赞美太阳的博客 2260

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

递归03-PTA-习题10-6 递归求Fabonacci数列 (10分)

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( int n ); int main() { int n; scanf("%d", &n); printf("%d\n

m0_46266264的博客 791

jdk-8u144-linux-x64.tar.gz.

该资源为搭建Linux系统Java环境用,资源的后缀为tar.gz格式的压缩包

PTA浙大版《C语言程序设计(第3版)》题目集习题10-6 递归求Fabonacci数列 (10 分)

习题10-6 递归求Fabonacci数列 (10 分) 本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( int n ); int main() { int n

m0_56566228的博客 403

PTA习题 函数编程与实现(一) 代码

本题要求实现一个简单函数,能计算给定的年份和月份的天数。其中1、3、5、7、8、10、12月有31天,4、6、9、11月有30天,2月平年有28天,闰年有29天。设有一个球从高度为h米的地方落下,碰到地面后又弹到高度为原来p倍的位置,然后又落下,再弹起,再落下…本题要求实现一个计算阶乘的简单函数,使得可以利用该函数,对给定的非负整数n,求该级数的前n+1项和。f(n)=f(n−2)+f(n−1) (n≥2),其中f(0)=0,f(1)=1。项Fibonacci数。其中n是用户传入的参数,函数返回n的阶乘。

渔梧的成长记录 2186

[PTA]习题10-6 递归求Fabonacci数列

本题要求实现求 Fabonacci 数列项的函数。Fabonacci 数列的定义如下:f(n) = f(n−2) + f(n−1) (n ≥ 2),其中 f(0) = 0,f(1) = 1。

春天熊的技术博客 1670

(C语言)6-5 递归求Fabonacci数列 (10 分)pta

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1)(n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( int n ); int main() { int n; scanf(.

wujiaming2002的博客 4962

[PTA]实验10-7 递归求Fabonacci数列

本题要求实现求 Fabonacci 数列项的函数。Fabonacci 数列的定义如下:f(n) = f(n−2) + f(n−1) (n ≥ 2),其中 f(0) = 0,f(1) = 1。

春天熊的技术博客 2030

递归求fabonacci数列 pta

斐波那契数列(Fibonacci sequence)是一个经典的数列,它由以下递归关系定义:其中,( F(0) = 0 ) 和 ( F(1) = 1 )。在编程中,递归是一种实现斐波那契数列的直观方法。这段代码定义了一个名为fibonacci的函数,它接受一个整数n作为参数,并返回斐波那契数列的第n个数。递归的基本情况是当n为0或1时,直接返回n。对于更大的n,函数会递归地计算F(n-1)和F(n-2),然后将它们相加以得到F(n)。

youyouxiong的博客 1218

递归求Fabonacci数列 PTA

递归可用于处理具有可分解为多个重复的小问题特征的难题哦 问题如下: 本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1)(n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( int n ); int mai.

qq_61661717的博客 4978

PTA 6-6 递归求Fabonacci数列

本题要求实现求Fabonacci数列项的函数。Fabonacci数列的定义如下: f(n)=f(n−2)+f(n−1)(n≥2),其中f(0)=0,f(1)=1。 函数接口定义: int f( int n ); 函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。 裁判测试程序样例: #include <stdio.h> int f( int n ); int main() { int n; scanf("%d.

weixin_42477240的博客 3788

PTA实验10 6-4 递归求Fabonacci数列

函数f应返回第n个Fabonacci数。题目保证输入输出在长整型范围内。建议用递归实现。

naughty0809的博客 1998

PTA6-3 递归求Fabonacci数列 本题要求实现求Fabonacci数列项的函数。

递归求Fabonacci数列

etamaos的博客 1164
上一篇: PTA 习题10-5 递归计算Ackermenn函数 (15分)
下一篇: PTA 习题10-7 十进制转换二进制 (15分)
eclipse_ali
博客等级 码龄7年 85粉丝 103原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值