intel linux drivers download 82865G

博客提供了英特尔图形支持页面的链接,即http://support.intel.com/support/graphics/sb/CS-010512.htm ,可用于获取相关图形支持信息。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

http://support.intel.com/support/graphics/sb/CS-010512.htm

Graphics
Graphics Drivers and Linux* Support

Due to the wide variety of Linux* distributions available, Intel has decided to base most of its Linux-based driver information on Red Hat* and SuSE*, unless otherwise noted. Other operating systems, such as FreeBSD* or Solaris*, are not specifically covered here; please refer to your specific vendor if you have questions. It has been Intel's intent to make these instructions as generic as possible.

Limited support is provided for Linux from Intel. Typically, Intel provides drivers, as applicable, to the major Linux distributions. You should contact your distribution vendor prior to contacting Intel for support.

Contents of this page:

Linux graphics driver availability
The Linux graphics driver is a unified driver. The driver is for the following Intel(R) Graphics controllers:
  • Intel® 82915G
  • Intel® 82910GL
  • Mobile Intel® 915GM/GMS/910GML
  • Intel® 82865G/GV
  • Intel® 82855GM/GME
  • Intel® 82852GM/GME
  • Intel® 82845G/GE/GL/GV
  • Intel® 82830MG
The driver is available on Download Finder.

Linux* drivers for Intel® Graphics have also been released to major distributions. Future releases of most Linux distributions should contain native Intel Graphics support.

Requirements: (and how to determine what is installed)< BR>
XFree86 4.2.0 or later
XFree86

Kernel 2.4.11 or later
Kernel 2.4.11

gcc installed
GCC

kernel header files installed
Kernel Header

Installation instructions

Notes:
  • These instructions are as generic as possible; the wide variety of Linux distributions precludes exhaustive testing. The driver file is not specific to any one distribution; please modify as needed for your system.
  • "nano" is used for convenience. Any console-based editor will be sufficient, such as vi, pico, or joe.
  1. Setup
    1. Install Linux
    2. Verify that your system meets the requirements specified above
    3. Set your system to boot to the command line by either changing your run level or by manually stopping X from a virtual terminal:
      1. In a terminal window, log in as a super user:
        intel@linux: > su
        Password:
        intel@linux: # nano /etc/inittab

        -change the default run level to boot to the command line (typically run level 3) 
        -save changes and exit

        intel@linux: # exit
        intel@linux: > exit

        -Restart the system

    4. Install kernel headers:
      1. For Red Hat, insert CD 2, browse to /RedHat/RPMS/kernel-source-<your kernel #>.i386.rpm, and double-click the file to run (these are your kernel headers)
      2. Alternately, load your kernel config file, save the config, then run "make dep"
  2. Getting the driver
    1. Connect to Download Finder to download the latest Linux graphics driver for your chipset.
  3. Installing the driver
    1. For SuSE only:
      intel@linux: # /usr/X11R6/bin/switch2xf86_glx
    2. TAR
      • Extract the files:
        • intel@linux: > cd /home/intel/download
          intel@linux: > tar zxvf dripkg.tar.gz
      • Run the install script
        • intel@linux: > cd dripkg
          intel@linux: > su
          Password:
          intel@linux: # ./install.sh
          -follow all prompts, accepting all defaults
    3. RPM
      • intel@linux: > cd /home/intel/download
        intel@linux: > su
        Password:
        intel@linux: # rpm -Uvh dripkg-1.0-4.i386.rpm
        intel@linux: # exit
    4. Modify the XF86Config file
      1. intel@linux: # cp /etc/X11/XF86Config /home/intel
        • Modify the XF86Config-4 file by one of three methods
          1. Use nano (or other text editor) to modify section "Device" - modify "Driver" entry to read "i810"
          2. OR run 'Xconfigurator,' selecting "Intel 830" from the list
          3. OR run 'X --configure' the edit ~/XF86Config.new
            1. Immediately after the "Monitor" line in the "Screen" section, add 'DefaultDepth 16'
            2. At the end of the file (if not already there), add:
              Section "DRI"
              Mode 0666
              EndSection
            3. Make the new config file the default by copying it to XF86Config-4:
              1. cp ~/XF86Config.new /etc/X11/XF86Config-4
          4. For SuSE only, in the "screen" section:
            1. Add a line for "DefaultDepth 24"
            2. Add a line under Subsection "Display," after "Depth 24" add a line for "Modes "1024x768" "800x600" as appropriate for your system
            Example:
            Section "Screen"
            • Identifier "Screen0"
              Device "Card0"
              Monitor "Monitor0"
              DefaultDepth 24
              Subsection "Display"
              • Depth 24
                Modes "1024x768" "800x600"
              EndSubSection
            End Section

      2. intel@linux: # exit
  4. Verifying installation and finishing up
    1. intel@linux: > startx
      intel@linux: > tuxracer
      intel@linux: > /sbin/lsmod | grep "i830"

      -"used by" should indicate "1"

      -set your runlevel back to 5 (4 for Slackware*) if desired

      intel@linux: # nano /etc/inittab

Uninstalling
    • intel@linux: > su
      Password:
      intel@linux: # cd /home/intel/download/dripkg
      intel@linux: # ./install.sh

  1. press ENTER on the Welcome screen
  2. Select option "2. Uninstall Driver" on the options screen
  3. If a previous installation is found, select which installation to which you would like to revert. Selecting a previous installation deletes all later installations.
  4. If no previous installation is found, you will be informed as such and the script will exit
  5. Follow all prompts and exit

    intel@linux: # exit

XFree86
Intel Graphics support has been added as an extension to the "i810" driver. If the distribution does not offer the option to select your graphics adapter, select "i810," "Intel 810," or the closest match to your actual chipset.

The same driver is used for X.org. 

The "i810" driver is used for all Intel onboard graphics controllers.

BIOS
The video memory limitations have been addressed for all chipsets via a Video BIOS update. Video BIOS updates are integrated into system BIOS updates. If your particular system still exhibits limited video memory issues (e.g. unable to run high colors at a high resolution) after following the installation instructions above, you may not have the updated Video BIOS.

If your Intel graphics controller-based system allocates less than 8MB of legacy VGA memory in the BIOS (i.e. 512K or 1MB), your display modes may be limited accordingly. A BIOS update, if available, may or may not include a current Video BIOS to correct this issue, at the discretion of the manufacturer.

Some systems may benefit from manually specifying the amount of available video memory with the "VideoRam" line in the XF86Config file. Up to 64MB has been tested successfully; success may vary depending on your specific system BIOS.

  • Non-Intel motherboards and Production Mobile Systems: Please contact your system manufacturer for instructions on increasing the amount of legacy video memory set aside, if available, or for a BIOS update to change this setting.

    Intel motherboard owners can download the latest BIOS from Download Finder.
Kernel
AGP GART and DRM support are included with the driver package and are part of the installation process. No further actions should be required to enable AGP GART or DRM support.

VESA*- only mode
If users require the use of an older kernel and are not able to or are unwilling to upgrade to kernel version 2.4.11 or later, Intel Graphics can still be utilized in VESA* mode.

Simply use the 'vesa' driver instead of the 'i810' driver in the "XF86Config," "XF86Config-4," or "xorg.conf" file.

Here is a sample "Device"section of the /etc/X11/XF86Config-4 file:

  • Section "Device"
    • #no known options
      Identifier "Intel 810"
      Driver "vesa"
      VendorName "Intel 810"
      BoardName "Intel 810"
      VideoRam "65536"
      #BusID
    EndSection



Notice that the only thing that should be changed is Driver "i810" to Driver "vesa". All other settings should be properly set by default. Set the VideoRam line to meet your needs.

Commercial Linux graphics drivers
Commercial providers of 3D accelerated drivers for Linux are available, but these drivers are usually not free of charge. Third parties have developed these drivers without involvement from Intel and these drivers are only mentioned here as a courtesy by Intel as an alternative proposal for interested parties. Intel does not support drivers from other vendors, and Intel cannot be responsible in any way for the content or operation of these drivers, and does not provide any warranty or guarantee of any kind with respect to their usability, suitability or performance for any application. Please contact these third party suppliers directly with questions or for more information.


   This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:

Intel® 82830M Graphics Controller
Intel® 82845G Graphics Controller
Intel® 82852/82855 Graphics Controller Family
Intel® 82865G Graphics Controller
Intel® 82915G/82910GL Express Chipset Family
Mobile Intel® 915GM/GMS, 910GML Express Chipset Family

### 关于 Intel X722 网卡的 Linux 驱动程序下载与安装 Intel X722 系列网卡支持多种操作系统下的驱动程序,其中包括 Linux 平台的支持。以下是关于该系列网卡在 Linux 下的相关信息以及如何获取并安装其驱动程序。 #### 1. 官方支持状态 官方已经停止对 Intel Ethernet Connection X722 的 iWARP RDMA 虚拟功能(VF)驱动 `i40iwvf` 的支持[^1]。然而,这并不意味着整个 X722 系列不再受支持。对于标准网络功能,仍然可以使用通用的 `ixgbevf` 或者 `ice` 驱动来实现基本和高级的功能支持。 #### 2. 获取驱动程序 为了获得最新的驱动程序版本,建议访问 Intel 官方网站上的 **Network Adapter Drivers** 页面。具体链接如下: - [Intel Network Adapter Driver Downloads](https://www.intel.com/content/www/us/en/download-center/home.html) 在此页面中,可以通过筛选条件找到适合的操作系统(如 Ubuntu、Red Hat Enterprise Linux 等),并选择对应的硬件型号(X722)。通常情况下,最新发布的驱动会附带详细的 README 文件说明兼容性和安装方法。 #### 3. 驱动安装过程概述 假设已成功下载到名为 `ice-*.tar.gz` 的压缩包文件,则按照以下流程操作: ```bash # 解压驱动程序源码包 tar -xzvf ice-<version>.tar.gz cd ice-<version> # 编译前卸载旧版模块(如果存在) sudo rmmod ixgbe || true sudo rmmod i40e || true # 执行编译脚本 make install # 加载新模块至内核空间 sudo modprobe ice ``` 完成上述命令序列之后重启计算机即可生效新的驱动加载情况。注意某些发行版可能需要额外配置 GRUB 参数或者调整 SELinux 设置才能正常工作。 #### 4. 特定环境注意事项 针对虚拟化场景下部署时遇到的问题,比如 VMware ESXi 不识别特定物理网卡的情况,可参照类似解决办法手动注入第三方提供的 Realtek 驱动方式处理[^2];而对于基于较新型号 CPU 和存储架构设计的目标服务器而言,在规划初期就应该考虑到选用完全被主流 Hypervisor 支持良好且性能优越的产品组合方案[^3]。 ---
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值