ubuntu中配置tftp服务(自己已经测试过)

本文介绍如何使用tftpd-hpa软件包配置TFTP服务器,并详细解释了关键配置选项,包括如何启动守护进程、指定监听地址及端口、允许文件创建以及设定TFTP根目录。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

sudo apt-get install tftpd-hpa tftp-hpa
打开/etc/default/tftpd-hpa
#Defaults for tftpd-hpa
RUN_DAEMON="no"
OPTIONS="-l -s /var/lib/tftpboot"
修改设置如下:
#Defaults for tftpd-hpa
RUN_DAEMON="yes"
OPTIONS="-l -s /home/zdreamx/tftpboot"
其中/home/zdreamx/tftpboot是自己设定的目录,可以根据情况修改。

选项参考
OPTIONS
-l Run the server in standalone (listen) mode, rather than run from
inetd. In listen mode, the -t option is ignored, and the -a
option can be used to specify a specific local address or port
to listen to.

-a [address][:port]
Specify a specific address and port to listen to when called
with the -l option. The default is to listen to the tftp port
specified in /etc/services on all local addresses.
listen 的 ip address 和 Port
-c Allow new files to be created. By default, tftpd will only
allow upload of files that already exist. Files are created
with default permissions allowing anyone to read or write them,
unless the -p or -U options are specified.

-s (决定tftp根目录)Change root directory on startup. This means the remote host
does not need to pass along the directory as part of the trans-
fer, and may add security. When -s is specified, exactly one
directory should be specified on the command line. The use of
this option is recommended for security as well as compatibility
with some boot ROMs which cannot be easily made to include a
directory name in its request.
重启OK

 

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值