Raize Components 6.2.2 for XE10.2 Tokyo update2 的安装与使用

Raize Components 6.2.2 for XE10.2 Tokyo  update2 ( c++builder)的安装说明(win7 32 or 64

                                        By runsky中行雷威2018.1.16

(同一个世界,同一个梦想,交流学习C++Builder XE10,传承c++builder的魅力!欢迎各地朋友加入我的QQ群484979943,进群密码“BCB”,同时也请将该群号广为宣传,希望能够广集各方高手,共同进步。)

说明:

1、 本控件程序来源于互联网,仅供学习参考;

2、 本文档适用于c++builder  XE10  for  win7 64,32位系统请根据实际目录修改;

3、 欢迎加入我的C++builder  QQ交流学习群(484979943)

4、Raize下载地址http://download.youkuaiyun.com/download/dlboy2018/10207495

一、 将压缩包解压或者拷贝到C:\Program Files (x86)\Embarcadero\Studio\19.0\Raize目录下,根据实际情况修改安装脚本Source\!Build_XE10.2.cmd

 

用记事本 打开 Source\!Build_XE10.2.cmd

找到set SysPath32="C:\Windows\SysWOW64"将引号内容修改为对应版本。

找到set VCLVersion="25"将数字修改为 对应的版本。

找到set DCC32EXE="C:\Program Files (x86)\Embarcadero\Studio\19.0\Bin\DCC32.exe"

找到set DCC64EXE="C:\Program Files (x86)\Embarcadero\Studio\19.0\Bin\DCC64.exe"

将他们的路径(bin 之前的)修改为你的安装路径

 

最后到开头附近找到rem goto InitComplete删除 rem

 

然后右键以管理员权限运行这个 cmd 文件即可。

运行中,会提示 找不到 xxxx.dcu这个不是问题。

 

 

二、(32位)将C:\Program Files (x86)\Embarcadero\Studio\19.0\Raize\Bin下的bpl文件拷贝到C:\Windows\system32

64位)将C:\Program Files (x86)\Embarcadero\Studio\19.0\Raize\Bin下的bpl文件拷贝到C:\Windows\SysWOW64下

 

 

三、 XE10新建项目,project-options,分别添加libinclude目录

1、 include

C:\Program Files (x86)\Embarcadero\Studio\19.0\Raize\Lib\RX10.2\Win32

2、 Lib

C:\Program Files (x86)\Embarcadero\Studio\19.0\Raize\Lib\RX10.2\Win32

 

四、 Component-Install packages添加选中的两个bpl文件

64位)在C:\Windows\SysWOW64目录下

32位)在C:\Windows\System32目录下

 

 

安装后如下图:

 

WELCOME TO KONOPKA SIGNATURE VCL CONTROLS VERSION 6 CONTENTS - Completing the Installation - What's New - Moving the Component Palettes Pages to Front - Uninstalling - Minimum system requirements COMPLETING THE INSTALLATION Once the installation program is complete you may begin using the components in RAD Studio 2009 and later using Delphi or C++Builder. Restart RAD Studio and you will see the following pages on the component palette: Raize Panels Raize Edits Raize Lists Raize Buttons Raize Display Raize Shell Raize Widgets WHAT'S NEW For a complete description of new components, enhancements, and features please read the WhatsNew.pdf document in the main installation directory along with this Readme.txt file. The information in the document is also available in the Raize Components help file, which is integrated into the RAD Studio Help System. MOVING THE COMPONENT PALETTE PAGES TO FRONT During the installation, the appropriate design packages are loaded into the selected RAD Studio IDEs. Unfortunately, when you restart the IDE, the component palette pages for the newly installed components will appear at the end of the component palette. If you would like to move the Raize pages to the front of the palette, there is an a easier way to do this than by manually dragging them. Located in the RC6\Bin directory is a program called MoveRCPagesToFront.exe, which will move all of the "Raize" pages to the front of the palette automatically. Simply run the MoveRCPageToFront.exe program and follow the instructions. UNINSTALLING >> Removing the components from the RAD Studio component palette Close all files and projects, and select Component|Install Packages... to display the Packages page in the Project Options dialog. Select the "Raize Components 6.x" package from the Design Packages list and click the Remove button. A message box will be displayed to confirm your request--press OK. Next, depending on the IDE, you may be asked if a runtime package should be from the Runtime Packages list. If so, click OK to remove the runtime package. Next, select the "Raize Components 6.x (Data-Aware)" package from the Design Packages list and click the Remove button. Again, a message box will be displayed to confirm your request--press OK. Next, depending on the IDE, you may be asked if a runtime package should be removed from the Runtime Packages list. If so, click OK to remove the runtime package. Close the Project Options dialog box by clicking the OK button. Repeat the above steps for each IDE that is using Raize Components. >> Removing the component files from your hard disk At this point, all IDEs are no longer using Raize Components. To remove the Raize Components files from your hard disk the Add/Remove Programs icon from the Control Panel. Next, select the "Raize Components 6.0" entry from the list of installed programs, and then click the Remove button. MINIMUM SYSTEM REQUIREMENTS At least one of the following compilers: Embarcadero RAD Studio XE8 -- Delphi XE8, C++Builder XE8 Embarcadero RAD Studio XE7 -- Delphi XE7, C++Builder XE7 Embarcadero RAD Studio XE6 (Update 1) -- Delphi XE6, C++Builder XE6 Embarcadero RAD Studio XE5 -- Delphi XE5, C++Builder XE5 Embarcadero RAD Studio XE4 -- Delphi XE4, C++Builder XE4 Embarcadero RAD Studio XE3 -- Delphi XE3, C++Builder XE3 Embarcadero RAD Studio XE2 (Update 1) -- Delphi XE2, C++Builder XE2 Embarcadero RAD Studio XE (Update 1) -- Delphi XE, C++Builder XE Embarcadero RAD Studio 2010 -- Delphi 2010, C++Builder 2010 CodeGear RAD Studio 2009 -- Delphi 2009, C++Builder 2009 Hard Disk Space Requirements: 20 MB + 10 MB for each compiler to be supported
Welcome to Raize Components 6! Raize Components is a user interface design system for Delphi and C++Builder. At its center is a collection of more than 125 general-purpose native VCL controls. Built on a foundation of technology first created more than fifteen years ago, these high-quality components give developers unsurpassed power and flexibility without sacrificing ease-of-use. In addition to the core set of controls, Raize Components includes more than 100 component designers focused on simplifying user interface development. Now more than ever, developers use Raize Components to build sophisticated user interfaces in less time with less effort. The primary focus of Raize Components 6 is on the new VCL capabilities that have been added to Embarcadero RAD Studio starting with XE2. Specifically, 64-bit VCL support and the really cool new VCL Styles support. Unlike other releases of RAD Studio which simply required recompiling the existing code base to provide a new set of DCUs and packages, there were a lot of low-level changes made to the VCL in XE2. For example, many controls migrated smoothly to 64-bit, but many others required low-level modifications. In addition, every control in Raize Components was affected by the new VCL Styles. Each control's display code needed to be significantly modified to fully support for VCL Styles when they are available. It has been a lot of work, but we are certain that you will find the end result really cool! There are other enhancements and fixes included in Raize Components 6, but 64-bit and VCL Styles support are the major new features. Raize Components 6 definitely leverages RAD Studio XE2, and to get the most out of RC6, you need XE2.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值