墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
4.9k累计阅读
5k平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
按照惯例，先解析一下项目结构，
是该项目下的静态资源文件夹，主要用于放除了页面以外的资源，这里一般不放页面，因为在加载页面的时候，这些资源文件会先加载,加载时域里所需的数据还未存储，自然也就拿不到数据了，所以只能将页面放置在templates文件夹下
这个文件夹下通常放一些动态页面，通常不能直接通过url直接进入页面，需要通过Controller层，跳到Controller请求数据再跳回页面，(=-=!!)看起来挺灵活的，毕竟是Spring的公司研发的，都是Spring的产品，和Spring能够无缝连接，和jsp比起来还是便捷一些的
Thymeleaf页面带来的问题:
两个页面之间如何嵌套，众所周知，实际开发中一个页面会包含许多其他的小模块，但是又不能直接访问templates文件夹下的文件
解决示例:
--页面1--
<!--这个页面叫house_list-->
<Agent本地部署教程详细步骤
在开始之前，你需要明确你要部署的Agent是什么。如果你需要部署其他Agent，请参考其官方文档调整步骤。
整车CAN网络错误帧排查方法
本文围绕 CAN 总线错误帧展开，先剖析其产生原因，涵盖物理连接与硬件问题、电磁兼容性问题、总线负载与设计问题及配置问题；再阐述位错误、填充错误等 5 类错误帧类型；接着说明错误帧与总线 BUSOFF 的关系，解析主动 / 被动错误状态及 BUSOFF 的触发与恢复；还结合整车故障案例做实际分析，指出错误帧根源多为线束或控制器问题。最后总结，强调错误帧是 CAN 协议保障高鲁棒性的机制，掌握相关知识助工程师提升 CAN 网络处理能力。
多路输出电源的交叉调整率：从理论到无源优化实践
本文深入探讨了多路输出电源中的交叉调整率问题，分析了其物理根源及无源优化方法。通过漏感与耦合的理论分析，结合加权反馈、电感耦合等五种无源优化技术，帮助工程师有效解决交叉调整率挑战。文章还以TDK-Lambda CUT75系列为例，展示了优化技术的实际应用与效果。
VINS-Fusion实战：从零搭建无人机视觉惯性导航系统（附ROS配置指南）
本文提供了一份详尽的VINS-Fusion实战指南，涵盖从硬件选型、传感器标定到ROS节点配置与参数调优的全过程。重点解析了如何将VINS-Fusion视觉惯性里程计系统与PX4飞控深度集成，并实现室外GPS融合，旨在帮助开发者从零搭建稳定、高精度的无人机视觉惯性导航系统。
HyperLynx（十九）DDR（二）DDR的地址仿真
(5)设置水平标尺为2ns/div，垂直标尺为500mV/div，如果有必要，可以通过多次仿真，得到一个更加理想的结果。此外，还可以看到信号在高低电平切换时，反射波形基本趋于平缓，许多大的反射切换边缘已减小，这给了我们更大的定时裕量。如果这些DIMM是缓冲过的，则4个DIMM通道是可行的，但因为这是一个无缓冲DIMM，(20)在编辑传输线对话框中，选择“Values”选项卡，改变传输线长度为3in，具体设置如图所示，单击“确定”按钮。(17)为了增加电压摆幅，选择一个比原来的47Ω小的电阻。
Python爬虫实战：模拟登录B站 – 处理Cookie和加密参数
由于B站在登录过程中采用了多种安全措施，包括加密的请求参数和cookie验证，模拟登录成为一项具有挑战性的任务。首先，我们需要获取B站的登录页面，并解析出其中的CSRF令牌和其他隐藏的字段。B站的登录接口通常会包含一些动态的加密参数，我们需要在登录前通过GET请求获取这些信息。本文详细介绍了如何使用Python模拟登录B站，解决加密参数的处理、图形验证码的识别以及登录后的数据抓取。库中的加密方法加密登录请求中的密码。一旦登录成功，我们可以通过维护会话状态，抓取登录后的数据，如个人主页、评论、观看记录等。
【城市数据集】世界城市数据库和访问门户工具WUDAPT
简介世界城市数据库和访问门户工具WUDAPT
康耐视visionpro-CogCreateSegmentAvgSegsTool操作工具详细说明
康耐视visionpro-CogCreateSegmentAvgSegsTool操作工具详细说明
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
OV9734 DATASHEET，完整规格书
OV9734完整规格书，包括电气参数，尺寸规格，寄存器配置表等
文档：亲测可用解决vnc灰屏，黑屏，鼠标大黑叉情况
主要解决vnc-viewer灰屏，黑屏，鼠标大黑叉等现象，详细见文档。
android 蓝牙通讯demo
android 下蓝牙通讯demo，实现了发现蓝牙，使能蓝牙，通过蓝牙发送消息。
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
2495
扫一扫
