转详细解读Statspack报告

转个好贴:ITPUB上的BTxigua兄的http://www.itpub.net/viewthread.php?tid=875132&extra=page%3D1%26amp%3Bfilter%3Ddigest

 

 

详细解读 STATSPACK 报告

 

 

详细解读 STATSPACK 报告... 1

1、报表头信息... 2

2、实例负载档信息... 2

3、实例有效性信息... 3

4、TOP 5及其他等待事件信息... 5

5、SQL统计信息... 10

5.1 SQL统计信息-逻辑读... 11

5.2 SQL统计信息-物理读... 11

5.3 SQL统计信息-执行次数... 12

5.4 SQL统计信息-调用、解析次数... 12

5.5 SQL统计信息-共享内存占用... 13

5.6 SQL统计信息-多版本缓存... 13

6、实例的活动信息... 14

7、I/O统计信息... 18

8、Buffer Pool统计信息... 20

9、实例的恢复情况统计信息... 21

10、Buffer Pool调整的Advisory. 21

11、Buffer Pool等待情况统计... 22

12、PGA统计信息... 22

13、PGA调整的Advisory. 23

14、队列的统计信息... 24

15、回滚段统计信息... 24

16、闩锁统计信息... 26

17、共享池统计信息... 31

18、SGA内存分配... 32

19、资源限制统计信息... 33

20、初始化统计信息... 34

  

    说在前面,很容易被忽略的几个点:在读报告的时候,我们首先需要看清楚,留意3个内容,这份报告所对应的数据库版本,cluster方式,以及报告的时间段。尤其需要注意的就是时间段,脱离了时间段的statspck将是毫无意义的,甚至会得出错误的结果。

 

STATSPACK report for

1、报表头信息

/* 报表头信息,数据库实例相关信息,包括数据库名称、ID、版本号及主机明等信息。

   另外,重点还需要关注一下报告产生的时间跨度(在这里是14分钟),以及并发数(在这里是272)。

DB Name         DB Id    Instance     Inst Num Release     Cluster Host

------------ ----------- ------------ -------- ----------- ------- ------------

ORA92         1924035339 ora92               1 9.2.0.6.0   NO      jsdxh_db02

 

              Snap Id     Snap Time      Sessions Curs/Sess Comment

            --------- ------------------ -------- --------- -------------------

Begin Snap:        13 14-Jul-07 00:18:52      274  55,345.0

  End Snap:        14 14-Jul-07 00:32:55      272  55,823.8

   Elapsed:               14.05 (mins)

 

Cache Sizes (end)

~~~~~~~~~~~~~~~~~

               Buffer Cache:     5,120M      Std Block Size:          8K

           Shared Pool Size:       400M          Log Buffer:      2,048K

 

2、实例负载档信息

Load Profile

~~~~~~~~~~~~                            Per Second       Per Transaction

                                   ---------------       ---------------

                  Redo size:            422,086.46              4,706.23

              Logical reads:             23,200.54                258.68

              Block changes:              3,080.59                 34.35

             Physical reads:                 31.46                  0.35

            Physical writes:                104.38                  1.16

                 User calls:                409.32                  4.56

                     Parses:                227.20                  2.53

                Hard parses:                  7.22                  0.08

                      Sorts:                213.87                  2.38

                     Logons:                  0.85                  0.01

                   Executes:              1,191.32                 13.28

               Transactions:                 89.69

/* 下面详细说明Load Profile各项含义

Redo size:每秒产生的日志大小(单位字节),可标志数据变更频率, 数据库任务的繁重与否。

Logical reads:平决每秒产生的逻辑读的block数。Logical Reads= Consistent Gets + DB Block Gets

Block changes:每秒block变化数量,数据库事物带来改变的块数量。

Physical reads:平均每秒数据库从磁盘读取的block数。

Physical writes:平均每秒数据库写磁盘的block数。

User calls:每秒用户调用次数。

Parses:每秒解析次数,包括fast parse,soft parse和hard parse三种数量的综合。软解析每秒超过300次意味着你的"应用程序"效率不高,调整session_cursor_cache。在这里,fast parse指的是直接在PGA中命中的情况(设置了session_cached_cursors=n);soft parse是指在shared pool中命中的情形;hard parse则是指都不命中的情况。

Hard parses:每秒产生的硬解析次数, 每秒超过100次,就可能说明你绑定使用的不好,也可能是共享池设置不合理。这时候可以启用参数cursor_sharing=similar|force,该参数默认值为exact。但该参数设置为similar时,存在bug,可能导致执行计划的不优。

Sorts:每秒产生的排序次数。

Logons:每秒登陆的次数。

Executes:每秒执行次数。

Transactions:每秒产生的事务数,反映数据库任务繁重与否。

  % Blocks changed per Read:   13.28    Recursive Call %:     80.21

 Rollback per transaction %:    0.03       Rows per Sort:      2.84

 

/* Load Profile 续

1)        % Blocks changed per Read:在每一次逻辑读中更改的块的百分比。

2)        Rollback per transaction %:看回滚率是不是很高,因为回滚很耗资源 ,如果回滚率过高,可能说明你的数据库经历了太多的无效操作 ,过多的回滚可能还会带来Undo Block的竞争 该参数计算公式如下: Round(User rollbacks / (user commits + user rollbacks) ,4)* 100% 。

3)        Recursive Call %:递归调用的百分比,如果有很多PL/SQL,那么这个值就会比较高。

4)        Rows per Sort:平均每次排序操作的行数。

3、实例有效性信息

Instance Efficiency Percentages (Target 100%)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

            Buffer Nowait %:   99.98       Redo NoWait %:    100.00

            Buffer  Hit   %:   99.87    In-memory Sort %:    100.00

            Library Hit   %:   99.67        Soft Parse %:     96.82

         Execute to Parse %:   80.93         Latch Hit %:     96.10

Parse CPU to Parse Elapsd %:    6.93     % Non-Parse CPU:     99.88

 

/* 实例的有效性,这部分值越接近100越好,分项内容详细说明如下:

1)        Buffer Nowait %:在缓冲区中获取Buffer的未等待比率。Buffer Nowait的这个值一般需要大于99%。否则可能存在争用,可以在后面的等待事件中进一步确认。

2)        Redo NoWait %:在Redo缓冲区获取Buffer空间的未等待比率。当redo buffer达到1M时,就需要写到redo log文件,所以一般当redo buffer设置超过1M,不太可能存在等待buffer空间分配的情况。当前,一般设置为2M的redo buffer,对于内存总量来说,应该不是一个太大的值。

3)        Buffer Hit %:数据块在数据缓冲区中的命中率,通常应在95%以上。否则,小于95%,需要调整重要的参数,小于90%可能是要加db_cache_size。一个高的命中率,不一定代表这个系统的性能是最优的,比如大量的非选择性的索引被频繁访问,就会造成命中率很高的假相(大量的db file sequential read),但是一个比较低的命中率,一般就会对这个系统的性能产生影响,需要调整。命中率的突变,往往是一个不好的信息。如果命中率突然增大,可以检查top buffer get SQL,查看导致大量逻辑读的语句和索引,如果命中率突然减小,可以检查top physical reads SQL,检查产生大量物理读的语句,主要是那些没有使用索引或者索引被删除的。

4)        In-memory Sort %:在内存中的排序率。如果低于95%,可以通过适当调大初始化参数PGA_AGGREGATE_TARGET或者SORT_AREA_SIZE来解决,注意这两个参数设置作用的范围时不同的,SORT_AREA_SIZE是针对每个session设置的,PGA_AGGREGATE_TARGET则时针对所有的sesion的。<

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/12778571/viewspace-511841/,如需转载,请注明出处,否则将追究法律责任。

转载于:http://blog.itpub.net/12778571/viewspace-511841/

推荐系统:NDCG评价指标及其Python实现方法 除了推荐任务,在二分类任务中,也可以计算该指标,代码如下: # ndcg def get_dcg(y_pred, y_true, k): #注意y_pred与y_true必须是一一对应的,并且y_pred越大越接近label=1(用相关性的说法就是,与label=1越相关) df = pd.DataFrame({"y_pred":y_pred, "y_true":y_true}) ... 阅读详情

相关推荐

树莓派4B(Raspbian buster系统)安装ROS Melodic(附带网络配置和远程桌面控制说明)

树莓派4B(Raspbian buster系统)安装ROS Melodic(附带网络配置和远程桌面控制说明) 一、硬件准备 二、软件准备 三、安装前的准备工作 四、开始ROS的安装 五、运行小乌龟 由于坑比较多希望大家安装的时候尽量不要跳步进行,一定要等每一步运行成功了再往下进行。 一、硬件准备 1、树莓派4B一个 2、SD卡一张(最好是16G以上的我的是用的64G的) 3、显示器、键盘、鼠标 二、软件准备 1、Raspberryimage (写系统使用的) 链接:https://pan.baidu.com

weixin_45315065的博客 1万+

详细解读 STATSPACK 报告(转BTxigua)

STATSPACK report for/* 报表头信息,数据库实例相关信息,包括数据库名称、ID、版本号及主机明等信息DB Name DB Id Instance Inst Num Release...

cs20080088的博客 175

FPGA可重构技术

介绍FPGA 可重构技术的实现方法,包括全局重构和部分重构

航天领域资深码农,型号经验丰富,一线干货分享 1990

详细解读 STATSPACK 报告

<br /> 详细解读 STATSPACK 报告<br /> <br /> <br />详细解读 STATSPACK 报告... 1<br />1、报表头信息... 2<br />2、实例负载档信息... 2<br />3、实例有效性信息... 3<br />4、TOP 5及其他等待事件信息... 5<br />5、SQL统计信息... 10<br />5.1 SQL统计信息-逻辑读... 11<br />5.2 SQL统计信息-物理读... 11<br />5.3 SQL统计信息-执行次数... 12<b

2333

基于OFDM的实时图像传输系统MATLAB仿真:MPSK与MQAM调制性能对比与误码率分析

本文详细介绍了基于OFDM的实时图像传输系统在MATLAB中的仿真实现,重点对比了MPSK与MQAM调制方式的性能差异与误码率分析。通过搭建OFDM系统模型,探讨了QPSK和16QAM在不同信道条件下的表现,包括频谱效率、抗噪能力和误码率等关键指标。文章还提供了MATLAB代码示例和实用技巧,帮助读者快速掌握OFDM图像传输系统的核心算法与优化方法。

weixin_29064009的博客 355

HBuilderX远程开发环境配置:Windows SSH连接实操

详细介绍如何在Windows系统中通过SSH连接远程服务器,配置HBuilderX进行高效远程开发,提升编码协作效率。全程实操演示,轻松掌握hbuilderx与远程环境的无缝对接。

weixin_35751194的博客 1195

详细解读statspack报告

详细解读 STATSPACK 报告 1、报表头信息 2、实例负载档信息 3、实例有效性信息 4、TOP 5及其他等待事件信息 5、SQL统计信息 5.1 SQL统计信息-逻辑读 5.2 SQL统计信息-物理读 5.3 SQL统计信息-执行次数 5.4 SQL统计信息-调用、解析次数 5.5 SQL统计信息-共享内存占用 5.6 SQL统计信息-多版本缓存 6、实例的活动信息

shany_121的专栏 955

ADS基础教程12 - 参数扫描

在硬件设计、仿真以及调试阶段,很多时候需要找到一个合理的参数来使设计处于最优状态。前面所讲的调优方式是其中的最直接的手段。因此,本文将介绍ADS中如何指定元器件的参数为变量,并可以对变量设置相应的约束条件,来实现的变量进行多组参数的仿真结果的展示。在图形显示界面,添加一个Plot,并添加参数结果。此时,结果中会显示出所有的扫描结果。参数扫描的要素包含:新建变量、变量参数设置、扫描模型设置三个方面。如果找不到该图标,在菜单栏单击右键,弹出的对话框将。,弹出的选项卡中,将添加两个变量。点击菜单栏的仿真按钮。

XZ_ZC的博客 8164

STATSPACK报告解读

STATSPACK报告解读[@more@]STATSPACK报告解读STATSPACK report forDB Name DB Id Instance Inst Num Release C...

congzhan2577的博客 185

DDD系列 - 第6讲 仓库Repository - Mybatis篇

书接上回,之前通过一个关于拆解、微服务、面向对象的故事,向大家介绍了如何从微服务、面向对象一步步演进到DDD的,整个演进过程如下图:其中在领域层,我们定义了富血模型的领域模型,包括聚合、聚合根、实体、值对象等。聚合在代码层面中的表现形式即是一个包Package,起到了边界的作用,聚合内的对象间高内聚,而聚合间低耦合。聚合中放着实体、值对象、仓库等,实体相较于值对象的一个典型区别就是实体存在唯一标识,并且可通过该唯一标识查询到该实体并对其进行相关操作,值对象不存在唯一标识且通常作为实体。

罗小爬的技术宝书 1788

YOLO26优化:注意力魔改 | EMA:基于跨空间学习的高效多尺度注意力,效果优于ECA、CBAM、CA

加入EMA注意力,一种基于跨空间学习的高效多尺度注意力,效果优于ECA、CBAM、CA等经典注意力。

①答疑群聊服务;②YOLO大模型知识问答系统;③计算机视觉论文生成智能体; 336

详细解读_STATSPACK_报告

说在前面,很容易被忽略的几个点:在读报告的时候,我们首先需要看清楚,留意3个内容,这份报告所对应的数据库版本,cluster方式,以及报告的时间段。尤其需要注意的就是时间段,eygle就说过,离开了时间的statspck将是毫无意义的。   STATSPACK report for /* 报表头信息,数据库实例相关信息,包括数据库名称、ID、版本号及主机明等信息 DB Name

新路的专栏 4639

AutoSAR_BSW高阶 7. Signal Group 信号组

Autosar BSW的高级配置是实现复杂汽车电子系统的关键步骤之一。通过合理配置信号组和使用适当的参数,您可以提高系统性能,确保数据的可靠传输。在本博客中,我们深入探讨了信号组的概念和高级配置参数,并提供了示例代码,希望这些信息能够帮助您更好地理解和应用Autosar BSW的高级配置。如果您在配置过程中遇到任何问题,不妨寻求专业支持,以确保您的汽车电子系统能够顺利运行。Autosar COM 模块是一个广泛应用于汽车行业的关键技术,它使不同的电子控制单元能够有效地通信和协作。

一直在水些技术小文 663

详细解读 STATSPACK 报告(更新)

目录: 详细解读 STATSPACK 报告... 1 1、报表头信息... 2 2、实例负载档信息... 3 3、实例有效性信息... 4 4、TOP 5及其他等待事件信息... 5 5、SQL统计信息... 11 ...

140

OV9734 DATASHEET,完整规格书

OV9734完整规格书,包括电气参数,尺寸规格,寄存器配置表等

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

[itpub.net]详细解读 STATSPACK (一)

说在前面,很容易被忽略的几个点:在读报告的时候,我们首先需要看清楚,留意3个内容,这份报告所对应的数据库版本,cluster方式,以及报告的时间段。尤其需要注意的就是时间段,脱离了时间段的statspck将是毫无意义的,甚至会得出错误的结果。

2301_76957510的博客 1059

Probability and Statistics - 4th edition

Probability and Statistics - 4th edition

详细解读 STATSPACK 报告(转载)

本文出自Oracle数据库管理板块,itpub网友BTxigua的原作。链接如下: http://www.itpub.net/875132.html 这是我看到的最为详尽的StatSpack报告解读,甚至比eygle的新书有关部...

csy542339419的博客 222

oracle statspack 报告详解

详细解读 STATSPACK 报告... 1 1、报表头信息... 2 2、实例负载档信息... 2 3、实例有效性信息... 3 4、TOP 5及其他等待事件信息... 5 5、SQL统计信息... 10 5.1 SQL统计信息-逻辑读... 11 5.2 SQL统计信息-物理读... 11 5.3 SQL统计信息-执行次数... 12 5.4 SQL统计信息-调用、解析次

njyxfw的专栏 3345
上一篇: 用2003版的Excel使用“宏”打开NMON软件生产的.nmon文件
下一篇: 查看一个表中的几列的数据都是一样的数量
css48419
博客等级 码龄12年 5粉丝 0原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值