Windows徽标认证Requirement和Policy更新

微软Windows徽标认证团队发布了新的Requirement和Policy更新,包括多个新增、停用及更新的认证要求,涉及图形、流媒体、连接性和系统基础等多个方面。
  微软WHQL认证代理公司
   http://www.whql-china.com
  
  Windows徽标认证团队提醒各位合作伙伴下列的Requirement和Policy已经更新。您可以在Winqual 网站(https://winqual.microsoft.com/default.aspx)上的LogoPoint中获取详细内容。
  
  新的Requirement
  
  下列为新增的Requirement,需要您提供意见反馈:
  
  • GRAPHICS-0083. Graphics - Additional Qualifications - Cold Tuning.
  
  • STREAM-0091. Tuner- Additional Qualifications - Hybrid/Combo Implementation.
  
  • STREAM-0092. Tuner- Additional Qualifications - Signal Quality and Signal Lock Test Suite.
  
  • CONNECT-0132. USB 3.0 hubs properly implement the SuperSpeed hub descriptor, standard SuperSpeed Descriptors, and the USB 2.0 ports in USB 3.0 hubs report version 2.1.
  
  • CONNECT-0133. USB 3.0 hubs map their ports as defined in section 10.1 of the USB 3.0 specification.
  
  • CONNECT-0134. USB 3.0 Hub should always report the port status bits correctly, as per the USB spec.
  
  • CONNECT-0135. In the scenario where SuperSpeed termination was disabled and device has been enumerated on 2.0 port, if the software enables the SuperSpeed and then resets the 2.0 port, device should correctly move over.
  
  • CONNECT-0136. USB 3.0 Hubs should not turn off SuperSpeed termination on downstream ports on over-current and port reset.
  
  • CONNECT-0137. USB hubs support suspend, and downstream devices should not fall off the bus when the hub resumes from selective suspend.
  
  • CONNECT-0138. USB Hubs correctly report whether they are bus or self-powered.
  
  • CONNECT-0139. All USB devices must enumerate and operate on EHCI and xHCI controllers as well as downstream of full speed, a high speed and SuperSpeed USB hubs.
  
  • CONNECT-0140. Devices should signal attach within 500ms after system resumes. If the hub lost power during system suspend, this interval will be calculated from the time hub has powered on the port.
  
  • CONNECT-0141. If the upstream SuperSpeed termination is on, devices should always connect on the 3.0 port and never connect on the 2.0 port.
  
  • CONNECT-0142. USB devices should not disconnect from the upstream port while going to or resuming from selective suspend.
  
  • SYSFUND-0230. Desktop and All-In One systems with Ethernet devices must implement network presence conform to the Power Management specification on the NDIS Program and Wake on LAN patterns.
  
  • SYSFUND-0229. Systems with a greater than 2.2 terabyte boot drive must comply with UEFI specification.
  
  • SYSFUND-0228. Server systems supporting RemoteFX must meet requirements.
  
  • GRAPHICS-0082. Graphics device intended for use with RemoteFX must meet requirements.
  
  • DEVFUND-0047. Drivers must support all PnP IRPs.
  
  已停用的Requirement
  
  下列的Requirement已经停用。请参见各项Requirement的详细内容以取得停止使用的日期。
  
  • GRAPHICS-0059
  
  • NETMEDIA-0039
  
  • NETMEDIA-0012
  
  • NETMEDIA-0057
  
  • NETMEDIA-0075
  
  • DISPLAY-0113
  
  • All MODEM requirements
  
  • NETWORK-0141, 0142, and 0143 (Winsock Direct)
  
  • NETWORK-0026, 0027, 0029, 0030, 0033, 0130, 0131, 0132 (ISDN)
  
  • CONNECT-0025, 0026, 0027, 0028, 0029 (IrDA)
  
  • DISPLAY-0103, 0106, 0107, 0108, 0109, 0110 and SYSFUND-0138 (Sideshow)
  
  • GRAPHICS-0014
  
  • GRAPHICS-0068
  
  • SYSFUND-0211
  
  • STORAGE-0004
  
  • STORAGE-0017
  
  • BUSPORT-0020
  
  • GRAPHICS-0021
  
  • DISPLAY-0112
  
  • SYSFUND-0218
  
  • DISPLAY-0063
  
  • DISPLAY-0095
  
  已更新的Requirement
  
  下列Requirement均已更新:
  
  • GRAPHICS-0010. Restructure of details.
  
  • CONNECT-0120. Republished.
  
  • NETMEDIA-0002. Clarification.
  
  • NETMEDIA-0008. Added "if-implemented."
  
  • NETMEDIA-0011. Added "if-implemented."
  
  • NETMEDIA-0017. Reworded exception.
  
  • NETMEDIA-0021. Minor edits.
  
  • NETMEDIA-0022. Clarification.
  
  • NETMEDIA-0026. Clarification.
  
  • NETMEDIA-0029. Clarification.
  
  • NETMEDIA-0032. Clarification.
  
  • NETMEDIA-0036. Removed "if-implemented," added clarification.
  
  • NETMEDIA-0037. Clarification, added exception.
  
  • NETMEDIA-0043. Clarification.
  
  • NETMEDIA-0047. Removed "if-implemented," clarified exception.
  
  • NETMEDIA-0049. Clarification.
  
  • NETMEDIA-0053. Added regional profiles, clarified exceptions.
  
  • NETMEDIA-0054. Removed "if-implemented."
  
  • NETMEDIA-0059. Clarification.
  
  • NETMEDIA-0060. Changed to "if-implemented."
  
  • NETMEDIA-0061. Clarification.
  
  • NETMEDIA-0066. Removed "if-implemented," added exception.
  
  • NETMEDIA-0078. Changed to "if-implemented."
  
  • PORTABLE-0036. Clarification.
  
  • NETMEDIA-0001. Clarification.
  
  • NETMEDIA-0003. Clarification.
  
  • NETMEDIA-0008. Clarification.
  
  • NETMEDIA-0018. Exemption clarified.
  
  • NETMEDIA-0041. Clarification.
  
  • NETMEDIA-0042. Clarification.
  
  • NETMEDIA-0048. Clarification.
  
  • NETMEDIA-0050. Clarification.
  
  • NETMEDIA-0051. Clarification.
  
  • NETMEDIA-0062. Clarification.
  
  • NETMEDIA-0070. Clarification.
  
  • NETMEDIA-0071. Clarification.
  
  • NETMEDIA-0072. Clarification.
  
  • STREAM-0084. Fixed typo.
  
  • BUSPORT-0041. Changed effective date to June 1, 2012.
  
  • SYSFUND-0192. Clarified intent on allowing only Windows 7 logo drivers on Windows 7 systems.
  
  • CONNECT-0123. Clarified meaning of "alternate."
  
  • NETWORK-0212. Changed effective date to January 1, 2011 for client devices.
  
  • NETWORK-0227. Changed effective date to January 1, 2011. Added clarification.
  
  • BUSPORT-0045. Deleted portion of text about CSZ bit.
  
  • DEVFUND-0039. Fixed typo.
  
  • DEVFUND-0048. Clarification.
  
  • STORAGE-0026. Clarification.
  
  • CONNECT-0034. Deleted section 5.
  
  • BUSPORT-0042. Changed effective date to June 1, 2012.
  
  • DISPLAY-0069. Restructured for clarity.
  
  • GRAPHICS-0007. Restructured for clarity.
  
  • GRAPHICS-0015. Updated title and added details.
  
  • GRAPHICS-0031. Restructured for clarity.
  
  • GRAPHICS-0036. Restructured for clarity.
  
  • GRAPHICS-0071. Restructured for clarity.
  
  • DISPLAY-0105. Added detail to design notes section.
  
  • GRAPHICS-0074. Added detail to the WDDM driver checklist.
  
  • GRAPHICS-0075. Added second paragraph.
  
  • STORAGE-0001. Changed end of life for Medium Changer and Tape programs to June 1, 2010.
  
  • STORAGE-0003. Clarifications, changed end of life for Medium Changer and Tape programs to June 1, 2010.
  
  • STORAGE-0024. Updated note, superseded STORAGE-0017.
  
  • STORAGE-0006. Clarification.
  
  • STORAGE-0007. Clarification.
  
  • BUSPORT-0019. Combined with BUSPORT-0020.
  
  • DISPLAY-0111. Does not apply to network projectors. Text clarification.
  
  • GRAPHICS-0016. Updated minimum color depth to 32 bpp.
  
  • STREAM-0082, 0083, 0084, 0085. Changed enforcement date to December 1, 2010.
  
  • INPUT-0067. Deleted references to Terminal Services.
  
  • SYSFUND-0009. Same change as GRAPHICS-0016.
  
  • SYSFUND-0185. Updated for Windows Home Server V2.
  
  • GRAPHICS-0023. Restructured for clarity.[@more@]

来自 “ ITPUB博客 ” ,链接:http://blog.itpub.net/21364747/viewspace-1036902/,如需转载,请注明出处,否则将追究法律责任。

转载于:http://blog.itpub.net/21364747/viewspace-1036902/

【电力系统】单机无穷大电力系统短路故障暂态稳定Simulink仿真(带说明文档)内容概要:本文档围绕“单机无穷大电力系统短路故障暂态稳定Simulink仿真”展开,提供了完整的仿真模型与说明文档,重点研究电力系统在发生短路故障后的暂态稳定性问题。通过Simulink搭建单机无穷大系统模型,模拟不同类型的短路故障(如三相短路),分析系统在故障期间及切除后的动态响应,包括发电机转子角度、转速、电压功率等关键参数的变化,进而评估系统的暂态稳定能力。该仿真有助于理解电力系统稳定性机理,掌握暂态过程分析方法。; 适合人群:电气工程及相关专业的本科生、研究生,以及从事电力系统分析、运行与控制工作的科研人员工程师。; 使用场景及目标:①学习电力系统暂态稳定的基本概念与分析方法;②掌握利用Simulink进行电力系统建模与仿真的技能;③研究短路故障对系统稳定性的影响及提高稳定性的措施(如故障清除时间优化);④辅助课程设计、毕业设计或科研项目中的系统仿真验证。; 阅读建议:建议结合电力系统稳定性理论知识进行学习,先理解仿真模型各模块的功能与参数设置,再运行仿真并仔细分析输出结果,尝试改变故障类型或系统参数以观察其对稳定性的影响,从而深化对暂态稳定问题的理解。
本研究聚焦于运用MATLAB平台,将支持向量机(SVM)应用于数据预测任务,并引入粒子群优化(PSO)算法对模型的关键参数进行自动调优。该研究属于机器学习领域的典型实践,其核心在于利用SVM构建分类模型,同时借助PSO的全局搜索能力,高效确定SVM的最优超参数配置,从而显著增强模型的整体预测效能。 支持向量机作为一种经典的监督学习方法,其基本原理是通过在高维特征空间中构造一个具有最大间隔的决策边界,以实现对样本数据的分类或回归分析。该算法擅长处理小规模样本集、非线性关系以及高维度特征识别问题,其有效性源于通过核函数将原始数据映射至更高维的空间,使得原本复杂的分类问题变得线性可分。 粒子群优化算法是一种模拟鸟群社会行为的群体智能优化技术。在该算法框架下,每个潜在解被视作一个“粒子”,粒子群在解空间中协同搜索,通过不断迭代更新自身速度与位置,并参考个体历史最优解群体全局最优解的信息,逐步逼近问题的最优解。在本应用中,PSO被专门用于搜寻SVM中影响模型性能的两个关键参数——正则化参数C与核函数参数γ的最优组合。 项目所提供的实现代码涵盖了从数据加载、预处理(如标准化处理)、基础SVM模型构建到PSO优化流程的完整步骤。优化过程会针对不同的核函数(例如线性核、多项式核及径向基函数核等)进行参数寻优,并系统评估优化前后模型性能的差异。性能对比通常基于准确率、精确率、召回率及F1分数等多项分类指标展开,从而定量验证PSO算法在提升SVM模型分类能力方面的实际效果。 本研究通过一个具体的MATLAB实现案例,旨在演示如何将全局优化算法与机器学习模型相结合,以解决模型参数选择这一关键问题。通过此实践,研究者不仅能够深入理解SVM的工作原理,还能掌握利用智能优化技术提升模型泛化性能的有效方法,这对于机器学习在实际问题中的应用具有重要的参考价值。 资源来源于网络分享,仅用于学习交流使用,请勿用于商业,如有侵权请联系我删除!
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值