the correct way of impact Crusher disassembly guide

REVIEW: impact crusher equipment disassembly is an important thing, because the only way to ensure proper demolition equipment from damage, in order to better work, this article on the impact crusher manufacturers to guide us back to our broken right demolition.

 

Crusher equipment in the production line of the more common , installation, equipment maintenance is in addition to another topic capacity outside more attention, because the installation and removal of the way the device is not correct, then it will cause damage to the parts of the device, which device in the future production process will cause some damage to the article on the impact crusher manufacturers to guide us the right way to disassemble the device.

Crusher equipment parts more, but the device has several important components, the demolition of these components will be more important, such as the thrust plate, the part is impact crusher production line safety device is relatively simple structure of the component but it is not easy repair and maintenance, you need the parts removed from the impact crusher machine order for maintenance, but does have some stress demolished once incorrectly will cause damage to the equipment.

Different manufacturers design of the thrust plate structure is different, so the thrust plate demolition needs to see the brand and the role of impact crusher equipment manufacturers assume impact crusher thrust plate is designed to link monolithic device, the time should be the first stop demolition Unscrew the bolts board first, that the purpose is to allow the tubing clean lubricating oil flow completely. Took over the lifting device with the history of impact crusher in china lifting, horizontal rod end of the spring is released, so that the movable jaw to the fixed jaw mobile devices direction, and finally to the demolition under the thrust plate.

After the right to remove the thrust plate must correct the impact crusher equipment necessary maintenance and timely cut thin oil lubricating pipe and cooling pipes. Then removed the rod cover, remove the rod. Then spindles, pulleys, flywheels take down the can, when in the demolition must follow the steps to prevent damage to the equipment.

Then you need to counterattack crusher movable jaw removed, the demolition process must first remove the lubricant and bearing cap Finally, a crane or other lifting equipment to pull out the jaw.

The above article introduces some of the impact crusher device Removing the important part, when the need for maintenance of equipment in accordance with the demolition given by the manufacturer to prevent damage to the equipment.

来自 “ ITPUB博客 ” ，链接：http://blog.itpub.net/30047666/viewspace-1357208/，如需转载，请注明出处，否则将追究法律责任。

转载于:http://blog.itpub.net/30047666/viewspace-1357208/