INSTALLING THE PAGER BINARY
If you're running the 32-bit version of Suse 11.2, you can
just download the new pager binary from here:
http://cosmicpenguin.com/kde/plasma_applet_pager.so
Then remove your current pager from its panel, and kill
plasma by doing "killall plasma-desktop"; this will cause
your panel(s) to disappear. Become root and rename your
current pager binary at:
/usr/lib/kde4/plasma_applet_pager.so
to something else (e.g., plasma_applet_pager.so.orig), and
copy the new plasma_applet_pager.so into the /usr/lib/kde4/
directory. (The new one is a lot bigger than the original --
588KB vs. 92KB -- presumably because it contains debugging
symbols.)
Then (as yourself again) run "plasma-desktop", which will
restore your panel(s) (I use one at the top of the screen and
one at the bottom). I get several error messages when I
restart plasma-desktop, but it works fine.
Do "Add Widgets" in the panel where the pager was, select
"Pager" from the list, and "Add Widget". Then right-click
on the pager now in the panel, select "Pager Settings", and
click the "Desktop name" button and "OK". The new pager will
then show the desktop names in readable form, and the current
desktop in reverse-video. It works great with every theme
I've tried, except Cream (where the name of the current
desktop is not shown in clear reverse-video). Enjoy!
BUILDING THE PAGER FROM SOURCE
If you want to build plasma_applet_pager.so from source
yourself (which I think you'll need to if you're running
64-bit Suse 11.2), here's how to do it:
Install everything in the "Base Development" and "KDE
Development" patterns in Yast Software Management.
Create a directory in your account to work in, go into it,
and run:
svn co svn://anonsvn.kde.org/home/kde/branches/KDE/4.3/kdebase/workspace/
Run cmake inside the topmost directory -- "workspace" . When
I did this cmake complained about LibKNotificationItem-1 being
missing, and I had to install libknotificationitem-1-devel via
Yast, and run cmake again. This time, although reporting that
some optional stuff was missing, it terminated normally with:
-- Configuring done
-- Generating done
-- Build files have been written to: /home/msb/KDEPAGER2/workspace
Go into the workspace/plasma/applets/pager directory, rename
pager.cpp to pager.cpp.orig, download the new pager.cpp from:
http://cosmicpenguin.com/kde/pager.cpp
put it in that directory, and run "make" there. That should
build the new binary plasma_applet_pager.so in the directory
workspace/lib .
Install that new plasma_applet_pager.so binary in place of
your current one according to the previous instructions above.
阅读(112) | 评论(0) | 转发(0) |
If you're running the 32-bit version of Suse 11.2, you can
just download the new pager binary from here:
http://cosmicpenguin.com/kde/plasma_applet_pager.so
Then remove your current pager from its panel, and kill
plasma by doing "killall plasma-desktop"; this will cause
your panel(s) to disappear. Become root and rename your
current pager binary at:
/usr/lib/kde4/plasma_applet_pager.so
to something else (e.g., plasma_applet_pager.so.orig), and
copy the new plasma_applet_pager.so into the /usr/lib/kde4/
directory. (The new one is a lot bigger than the original --
588KB vs. 92KB -- presumably because it contains debugging
symbols.)
Then (as yourself again) run "plasma-desktop", which will
restore your panel(s) (I use one at the top of the screen and
one at the bottom). I get several error messages when I
restart plasma-desktop, but it works fine.
Do "Add Widgets" in the panel where the pager was, select
"Pager" from the list, and "Add Widget". Then right-click
on the pager now in the panel, select "Pager Settings", and
click the "Desktop name" button and "OK". The new pager will
then show the desktop names in readable form, and the current
desktop in reverse-video. It works great with every theme
I've tried, except Cream (where the name of the current
desktop is not shown in clear reverse-video). Enjoy!
BUILDING THE PAGER FROM SOURCE
If you want to build plasma_applet_pager.so from source
yourself (which I think you'll need to if you're running
64-bit Suse 11.2), here's how to do it:
Install everything in the "Base Development" and "KDE
Development" patterns in Yast Software Management.
Create a directory in your account to work in, go into it,
and run:
svn co svn://anonsvn.kde.org/home/kde/branches/KDE/4.3/kdebase/workspace/
Run cmake inside the topmost directory -- "workspace" . When
I did this cmake complained about LibKNotificationItem-1 being
missing, and I had to install libknotificationitem-1-devel via
Yast, and run cmake again. This time, although reporting that
some optional stuff was missing, it terminated normally with:
-- Configuring done
-- Generating done
-- Build files have been written to: /home/msb/KDEPAGER2/workspace
Go into the workspace/plasma/applets/pager directory, rename
pager.cpp to pager.cpp.orig, download the new pager.cpp from:
http://cosmicpenguin.com/kde/pager.cpp
put it in that directory, and run "make" there. That should
build the new binary plasma_applet_pager.so in the directory
workspace/lib .
Install that new plasma_applet_pager.so binary in place of
your current one according to the previous instructions above.
相关热门文章
给主人留下些什么吧！~~
评论热议
扫一扫
5
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
