【WSL2】ubuntu22.04 安装docker

原创已于 2022-12-15 16:27:33 修改 · 2k 阅读

4 ·

CC 4.0 BY-SA版权

文章标签：

#docker #linux #ubuntu

于 2022-12-15 16:06:25 首次发布

windows环境编程专栏收录该内容

145 篇文章

订阅专栏

本文详细介绍在Ubuntu系统上安装Docker的过程。首先安装必要的HTTPS传输工具和CA证书，然后配置国内或国际Docker APT源，最后通过apt命令完成Docker核心组件的安装。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

docker安装

安装docker

由于 apt 源使用 HTTPS 以确保软件下载过程中不被篡改。因此，我们首先需要添加使用 HTTPS 传输的软件包以及 CA 证书。

sudo apt-get install \
    apt-transport-https \
    ca-certificates \
    curl \
    gnupg \
    lsb-release

  build git:(master) ✗ sudo apt-get install \
    apt-transport-https \
    ca-certificates \
    curl \
    gnupg \
    lsb-release
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
lsb-release is already the newest version (11.1.0ubuntu4).
The following packages were automatically installed and are no longer required:
  bolt busybox-initramfs cryptsetup finalrd fwupd-signed gir1.2-packagekitglib-1.0 initramfs-tools-bin
  klibc-utils libappstream4 libatasmart4 libblockdev-crypto2 libblockdev-fs2 libblockdev-loop2
  libblockdev-part-err2 libblockdev-part2 libblockdev-swap2 libblockdev-utils2 libblockdev2 libefiboot1
  libefivar1 libflashrom1 libftdi1-2 libfwupd2 libfwupdplugin5 libgcab-1.0-0 libgpgme11 libgusb2 libisns0
  libjcat1 libklibc libmbim-glib4 libmbim-proxy libmm-glib0 libnetplan0 libnspr4 libnss3 libopeniscsiusr
  libpackagekit-glib2-18 libparted-fs-resize0 libplymouth5 libpolkit-agent-1-0 libpolkit-gobject-1-0
  libqmi-glib5 libqmi-proxy libsgutils2-2 libsmbios-c2 libstemmer0d libtcl8.6 libudisks2-0 liburcu8
  libvolume-key1 libxmlb2 linux-base python3-software-properties sbsigntool secureboot-db sg3-utils
  squashfs-tools tcl tcl8.6 usb-modeswitch usb-modeswitch-data
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  dirmngr gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server gpgconf gpgsm gpgv libcurl4
Suggested packages:
  dbus-user-session libpam-systemd pinentry-gnome3 tor parcimonie xloadimage scdaemon
The following NEW packages will be installed:
  apt-transport-https
The following packages will be upgraded:
  ca-certificates curl dirmngr gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpg-wks-server
  gpgconf gpgsm gpgv libcurl4
14 upgraded, 1 newly installed, 0 to remove and 206 not upgraded.
Need to get 2,875 kB of archives.
After this operation, 165 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gpg-wks-client amd64 2.2.27-3ubuntu2.1 [62.7 kB]
Get:2 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 dirmngr amd64 2.2.27-3ubuntu2.1 [293 kB]
Get:3 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gnupg-utils amd64 2.2.27-3ubuntu2.1 [308 kB]
Get:4 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gpg-wks-server amd64 2.2.27-3ubuntu2.1 [57.5 kB]
Get:5 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gpg-agent amd64 2.2.27-3ubuntu2.1 [209 kB]
Get:6 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gpg amd64 2.2.27-3ubuntu2.1 [519 kB]
Get:7 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gpgconf amd64 2.2.27-3ubuntu2.1 [94.2 kB]
Get:8 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gnupg-l10n all 2.2.27-3ubuntu2.1 [54.4 kB]
Get:9 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gnupg all 2.2.27-3ubuntu2.1 [315 kB]
Get:10 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gpgsm amd64 2.2.27-3ubuntu2.1 [197 kB]
Get:11 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 gpgv amd64 2.2.27-3ubuntu2.1 [137 kB]
Get:12 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 ca-certificates all 20211016ubuntu0.22.04.1 [144 kB]
Get:13 http://mirrors.aliyun.com/ubuntu jammy-updates/universe amd64 apt-transport-https all 2.4.8 [1,506 B]
Get:14 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 curl amd64 7.81.0-1ubuntu1.6 [194 kB]
Get:15 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 libcurl4 amd64 7.81.0-1ubuntu1.6 [290 kB]
Fetched 2,875 kB in 31s (93.8 kB/s)
Preconfiguring packages ...
(Reading database ... 82475 files and directories currently installed.)
Preparing to unpack .../00-gpg-wks-client_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gpg-wks-client (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../01-dirmngr_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking dirmngr (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../02-gnupg-utils_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gnupg-utils (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../03-gpg-wks-server_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gpg-wks-server (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../04-gpg-agent_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gpg-agent (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../05-gpg_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gpg (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../06-gpgconf_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gpgconf (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../07-gnupg-l10n_2.2.27-3ubuntu2.1_all.deb ...
Unpacking gnupg-l10n (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../08-gnupg_2.2.27-3ubuntu2.1_all.deb ...
Unpacking gnupg (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../09-gpgsm_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gpgsm (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Preparing to unpack .../10-gpgv_2.2.27-3ubuntu2.1_amd64.deb ...
Unpacking gpgv (2.2.27-3ubuntu2.1) over (2.2.27-3ubuntu2) ...
Setting up gpgv (2.2.27-3ubuntu2.1) ...
(Reading database ... 82475 files and directories currently installed.)
Preparing to unpack .../ca-certificates_20211016ubuntu0.22.04.1_all.deb ...
Unpacking ca-certificates (20211016ubuntu0.22.04.1) over (20211016) ...
Selecting previously unselected package apt-transport-https.
Preparing to unpack .../apt-transport-https_2.4.8_all.deb ...
Unpacking apt-transport-https (2.4.8) ...
Preparing to unpack .../curl_7.81.0-1ubuntu1.6_amd64.deb ...
Unpacking curl (7.81.0-1ubuntu1.6) over (7.81.0-1ubuntu1.2) ...
Preparing to unpack .../libcurl4_7.81.0-1ubuntu1.6_amd64.deb ...
Unpacking libcurl4:amd64 (7.81.0-1ubuntu1.6) over (7.81.0-1ubuntu1.2) ...
Setting up apt-transport-https (2.4.8) ...
Setting up ca-certificates (20211016ubuntu0.22.04.1) ...
Updating certificates in /etc/ssl/certs...
rehash: warning: skipping ca-certificates.crt,it does not contain exactly one certificate or CRL
0 added, 3 removed; done.
Setting up gnupg-l10n (2.2.27-3ubuntu2.1) ...
Setting up gpgconf (2.2.27-3ubuntu2.1) ...
Setting up libcurl4:amd64 (7.81.0-1ubuntu1.6) ...
Setting up curl (7.81.0-1ubuntu1.6) ...
Setting up gpg (2.2.27-3ubuntu2.1) ...
Setting up gnupg-utils (2.2.27-3ubuntu2.1) ...
Setting up gpg-agent (2.2.27-3ubuntu2.1) ...
Setting up gpgsm (2.2.27-3ubuntu2.1) ...
Setting up dirmngr (2.2.27-3ubuntu2.1) ...
Setting up gpg-wks-server (2.2.27-3ubuntu2.1) ...
Setting up gpg-wks-client (2.2.27-3ubuntu2.1) ...
Setting up gnupg (2.2.27-3ubuntu2.1) ...
Processing triggers for libc-bin (2.35-0ubuntu3) ...
/sbin/ldconfig.real: /usr/lib/wsl/lib/libcuda.so.1 is not a symbolic link

Processing triggers for man-db (2.10.2-1) ...
Processing triggers for install-info (6.8-4build1) ...
Processing triggers for ca-certificates (20211016ubuntu0.22.04.1) ...
Updating certificates in /etc/ssl/certs...
0 added, 0 removed; done.
Running hooks in /etc/ca-certificates/update.d...
done.
Scanning processes...
Scanning processor microcode...
Scanning linux images...

Failed to retrieve available kernel versions.

Failed to check for processor microcode upgrades.

No services need to be restarted.

No containers need to be restarted.

No user sessions are running outdated binaries.

No VM guests are running outdated hypervisor (qemu) binaries on this host.
➜  build git:(master) ✗

国内源


➜  build git:(master) ✗ curl -fsSL https://mirrors.aliyun.com/docker-ce/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
➜  build git:(master) ✗ echo \
  "deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://mirrors.aliyun.com/docker-ce/linux/ubuntu \
  $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
➜  build git:(master) ✗

以上命令会添加稳定版本的 Docker APT 镜像源，如果需要测试版本的 Docker 请将 stable 改为 test。

更新下

  build git:(master) ✗  sudo apt-get update
Get:1 https://mirrors.aliyun.com/docker-ce/linux/ubuntu jammy InRelease [48.9 kB]
Hit:2 http://mirrors.aliyun.com/ubuntu jammy InRelease
Hit:3 http://mirrors.aliyun.com/ubuntu jammy-security InRelease
Hit:4 http://mirrors.aliyun.com/ubuntu jammy-updates InRelease
Hit:5 https://mirrors.ustc.edu.cn/ubuntu jammy InRelease
Hit:6 http://mirrors.aliyun.com/ubuntu jammy-proposed InRelease
Hit:7 https://mirrors.ustc.edu.cn/ubuntu jammy-updates InRelease
Hit:8 http://mirrors.163.com/ubuntu jammy InRelease
Hit:9 http://mirrors.aliyun.com/ubuntu jammy-backports InRelease
Hit:10 https://mirrors.ustc.edu.cn/ubuntu jammy-backports InRelease
Hit:11 https://mirrors.ustc.edu.cn/ubuntu jammy-security InRelease
Hit:12 https://mirrors.ustc.edu.cn/ubuntu jammy-proposed InRelease
Hit:13 http://mirrors.163.com/ubuntu jammy-security InRelease
Hit:14 http://mirrors.163.com/ubuntu jammy-updates InRelease
Hit:15 http://mirrors.163.com/ubuntu jammy-proposed InRelease
Hit:16 http://mirrors.163.com/ubuntu jammy-backports InRelease
Hit:17 http://security.ubuntu.com/ubuntu jammy-security InRelease
Hit:18 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:19 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Get:20 https://mirrors.aliyun.com/docker-ce/linux/ubuntu jammy/stable amd64 Packages [9,980 B]
Hit:21 http://archive.ubuntu.com/ubuntu jammy-backports InRelease
Fetched 58.8 kB in 11s (5,325 B/s)
Reading package lists... Done
➜  build git:(master) ✗

官方源 :暂时没启用

官方源


curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg

docker软件官方源

# 官方源
$ echo \
   "deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu \
      $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

install docker

➜  build git:(master) ✗ sudo apt-get install docker-ce docker-ce-cli containerd.io
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
  bolt busybox-initramfs cryptsetup finalrd fwupd-signed gir1.2-packagekitglib-1.0 initramfs-tools-bin
  klibc-utils libappstream4 libatasmart4 libblockdev-crypto2 libblockdev-fs2 libblockdev-loop2
  libblockdev-part-err2 libblockdev-part2 libblockdev-swap2 libblockdev-utils2 libblockdev2 libefiboot1
  libefivar1 libflashrom1 libftdi1-2 libfwupd2 libfwupdplugin5 libgcab-1.0-0 libgpgme11 libgusb2 libisns0
  libjcat1 libklibc libmbim-glib4 libmbim-proxy libmm-glib0 libnetplan0 libnspr4 libnss3 libopeniscsiusr
  libpackagekit-glib2-18 libparted-fs-resize0 libplymouth5 libpolkit-agent-1-0 libpolkit-gobject-1-0
  libqmi-glib5 libqmi-proxy libsgutils2-2 libsmbios-c2 libstemmer0d libtcl8.6 libudisks2-0 liburcu8
  libvolume-key1 libxmlb2 linux-base python3-software-properties sbsigntool secureboot-db sg3-utils
  squashfs-tools tcl tcl8.6 usb-modeswitch usb-modeswitch-data
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  dbus dbus-user-session dbus-x11 docker-ce-rootless-extras docker-scan-plugin libdbus-1-3 libdbus-1-dev
  libpam-systemd libslirp0 libsystemd0 pigz slirp4netns systemd systemd-sysv
Suggested packages:
  aufs-tools cgroupfs-mount | cgroup-lite systemd-container libtss2-esys-3.0.2-0 libtss2-mu0 libtss2-rc0
  policykit-1
Recommended packages:
  systemd-timesyncd | time-daemon libnss-systemd
The following NEW packages will be installed:
  containerd.io dbus-user-session docker-ce docker-ce-cli docker-ce-rootless-extras docker-scan-plugin
  libpam-systemd libslirp0 pigz slirp4netns
The following packages will be upgraded:
  dbus dbus-x11 libdbus-1-3 libdbus-1-dev libsystemd0 systemd systemd-sysv
7 upgraded, 10 newly installed, 0 to remove and 199 not upgraded.
Need to get 108 MB of archives.
After this operation, 384 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
0% [Working]

配置了代理后，国内阿里云有点慢？

安装成功


➜  build git:(master) ✗ sudo apt-get install docker-ce docker-ce-cli containerd.io
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
  bolt busybox-initramfs cryptsetup finalrd fwupd-signed gir1.2-packagekitglib-1.0 initramfs-tools-bin
  klibc-utils libappstream4 libatasmart4 libblockdev-crypto2 libblockdev-fs2 libblockdev-loop2
  libblockdev-part-err2 libblockdev-part2 libblockdev-swap2 libblockdev-utils2 libblockdev2 libefiboot1
  libefivar1 libflashrom1 libftdi1-2 libfwupd2 libfwupdplugin5 libgcab-1.0-0 libgpgme11 libgusb2 libisns0
  libjcat1 libklibc libmbim-glib4 libmbim-proxy libmm-glib0 libnetplan0 libnspr4 libnss3 libopeniscsiusr
  libpackagekit-glib2-18 libparted-fs-resize0 libplymouth5 libpolkit-agent-1-0 libpolkit-gobject-1-0
  libqmi-glib5 libqmi-proxy libsgutils2-2 libsmbios-c2 libstemmer0d libtcl8.6 libudisks2-0 liburcu8
  libvolume-key1 libxmlb2 linux-base python3-software-properties sbsigntool secureboot-db sg3-utils
  squashfs-tools tcl tcl8.6 usb-modeswitch usb-modeswitch-data
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  dbus dbus-user-session dbus-x11 docker-ce-rootless-extras docker-scan-plugin libdbus-1-3 libdbus-1-dev
  libpam-systemd libslirp0 libsystemd0 pigz slirp4netns systemd systemd-sysv
Suggested packages:
  aufs-tools cgroupfs-mount | cgroup-lite systemd-container libtss2-esys-3.0.2-0 libtss2-mu0 libtss2-rc0
  policykit-1
Recommended packages:
  systemd-timesyncd | time-daemon libnss-systemd
The following NEW packages will be installed:
  containerd.io dbus-user-session docker-ce docker-ce-cli docker-ce-rootless-extras docker-scan-plugin
  libpam-systemd libslirp0 pigz slirp4netns
The following packages will be upgraded:
  dbus dbus-x11 libdbus-1-3 libdbus-1-dev libsystemd0 systemd systemd-sysv
7 upgraded, 10 newly installed, 0 to remove and 199 not upgraded.
Need to get 108 MB of archives.
After this operation, 384 MB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://mirrors.aliyun.com/ubuntu jammy-updates/main amd64 systemd-sysv amd64 249.11-0ubuntu3.6 [10.5 kB]
Get:2 https://mirrors.aliyun.com/docker-ce/linux/ubuntu jammy/stable amd64 containerd.io amd64 1.6.12-1 [27.7 MB]
Get:3 http://mirrors.aliyun.com/ubuntu jammy-updates/main amd64 systemd amd64 249.11-0ubuntu3.6 [4,580 kB]
Get:4 http://mirrors.aliyun.com/ubuntu jammy-updates/main amd64 libsystemd0 amd64 249.11-0ubuntu3.6 [318 kB]
Get:5 http://mirrors.aliyun.com/ubuntu jammy/universe amd64 pigz amd64 2.6-1 [63.6 kB]
Get:6 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 libdbus-1-dev amd64 1.12.20-2ubuntu4.1 [188 kB]
Get:7 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 dbus-x11 amd64 1.12.20-2ubuntu4.1 [23.0 kB]
Get:8 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 dbus amd64 1.12.20-2ubuntu4.1 [158 kB]
Get:9 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 libdbus-1-3 amd64 1.12.20-2ubuntu4.1 [189 kB]
Get:10 http://mirrors.aliyun.com/ubuntu jammy-updates/main amd64 libpam-systemd amd64 249.11-0ubuntu3.6 [203 kB]
Get:11 http://mirrors.aliyun.com/ubuntu jammy-security/main amd64 dbus-user-session amd64 1.12.20-2ubuntu4.1 [9,442 B]
Get:12 http://mirrors.aliyun.com/ubuntu jammy/main amd64 libslirp0 amd64 4.6.1-1build1 [61.5 kB]
Get:13 http://mirrors.aliyun.com/ubuntu jammy/universe amd64 slirp4netns amd64 1.0.1-2 [28.2 kB]
Get:14 https://mirrors.aliyun.com/docker-ce/linux/ubuntu jammy/stable amd64 docker-ce-cli amd64 5:20.10.21~3-0~ubuntu-jammy [41.5 MB]
Get:15 https://mirrors.aliyun.com/docker-ce/linux/ubuntu jammy/stable amd64 docker-ce amd64 5:20.10.21~3-0~ubuntu-jammy [20.5 MB]
Get:16 https://mirrors.aliyun.com/docker-ce/linux/ubuntu jammy/stable amd64 docker-ce-rootless-extras amd64 5:20.10.21~3-0~ubuntu-jammy [8,389 kB]
Get:17 https://mirrors.aliyun.com/docker-ce/linux/ubuntu jammy/stable amd64 docker-scan-plugin amd64 0.21.0~ubuntu-jammy [3,622 kB]
Fetched 108 MB in 20min 43s (86.5 kB/s)
(Reading database ... 82476 files and directories currently installed.)
Preparing to unpack .../systemd-sysv_249.11-0ubuntu3.6_amd64.deb ...
Unpacking systemd-sysv (249.11-0ubuntu3.6) over (249.11-0ubuntu3.1) ...
Preparing to unpack .../systemd_249.11-0ubuntu3.6_amd64.deb ...
Unpacking systemd (249.11-0ubuntu3.6) over (249.11-0ubuntu3.1) ...
Preparing to unpack .../libsystemd0_249.11-0ubuntu3.6_amd64.deb ...
Unpacking libsystemd0:amd64 (249.11-0ubuntu3.6) over (249.11-0ubuntu3.1) ...
Setting up libsystemd0:amd64 (249.11-0ubuntu3.6) ...
Selecting previously unselected package pigz.
(Reading database ... 82476 files and directories currently installed.)
Preparing to unpack .../00-pigz_2.6-1_amd64.deb ...
Unpacking pigz (2.6-1) ...
Preparing to unpack .../01-libdbus-1-dev_1.12.20-2ubuntu4.1_amd64.deb ...
Unpacking libdbus-1-dev:amd64 (1.12.20-2ubuntu4.1) over (1.12.20-2ubuntu4) ...
Preparing to unpack .../02-dbus-x11_1.12.20-2ubuntu4.1_amd64.deb ...
Unpacking dbus-x11 (1.12.20-2ubuntu4.1) over (1.12.20-2ubuntu4) ...
Preparing to unpack .../03-dbus_1.12.20-2ubuntu4.1_amd64.deb ...
Unpacking dbus (1.12.20-2ubuntu4.1) over (1.12.20-2ubuntu4) ...
Preparing to unpack .../04-libdbus-1-3_1.12.20-2ubuntu4.1_amd64.deb ...
Unpacking libdbus-1-3:amd64 (1.12.20-2ubuntu4.1) over (1.12.20-2ubuntu4) ...
Selecting previously unselected package libpam-systemd:amd64.
Preparing to unpack .../05-libpam-systemd_249.11-0ubuntu3.6_amd64.deb ...
Unpacking libpam-systemd:amd64 (249.11-0ubuntu3.6) ...
Selecting previously unselected package containerd.io.
Preparing to unpack .../06-containerd.io_1.6.12-1_amd64.deb ...
Unpacking containerd.io (1.6.12-1) ...
Selecting previously unselected package dbus-user-session.
Preparing to unpack .../07-dbus-user-session_1.12.20-2ubuntu4.1_amd64.deb ...
Unpacking dbus-user-session (1.12.20-2ubuntu4.1) ...
Selecting previously unselected package docker-ce-cli.
Preparing to unpack .../08-docker-ce-cli_5%3a20.10.21~3-0~ubuntu-jammy_amd64.deb ...
Unpacking docker-ce-cli (5:20.10.21~3-0~ubuntu-jammy) ...
Selecting previously unselected package docker-ce.
Preparing to unpack .../09-docker-ce_5%3a20.10.21~3-0~ubuntu-jammy_amd64.deb ...
Unpacking docker-ce (5:20.10.21~3-0~ubuntu-jammy) ...
Selecting previously unselected package docker-ce-rootless-extras.
Preparing to unpack .../10-docker-ce-rootless-extras_5%3a20.10.21~3-0~ubuntu-jammy_amd64.deb ...
Unpacking docker-ce-rootless-extras (5:20.10.21~3-0~ubuntu-jammy) ...
Selecting previously unselected package docker-scan-plugin.
Preparing to unpack .../11-docker-scan-plugin_0.21.0~ubuntu-jammy_amd64.deb ...
Unpacking docker-scan-plugin (0.21.0~ubuntu-jammy) ...
Selecting previously unselected package libslirp0:amd64.
Preparing to unpack .../12-libslirp0_4.6.1-1build1_amd64.deb ...
Unpacking libslirp0:amd64 (4.6.1-1build1) ...
Selecting previously unselected package slirp4netns.
Preparing to unpack .../13-slirp4netns_1.0.1-2_amd64.deb ...
Unpacking slirp4netns (1.0.1-2) ...
Setting up docker-scan-plugin (0.21.0~ubuntu-jammy) ...
Setting up systemd (249.11-0ubuntu3.6) ...
Initializing machine ID from D-Bus machine ID.
Setting up libdbus-1-3:amd64 (1.12.20-2ubuntu4.1) ...
Setting up dbus (1.12.20-2ubuntu4.1) ...
Setting up containerd.io (1.6.12-1) ...
Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service.
Setting up docker-ce-cli (5:20.10.21~3-0~ubuntu-jammy) ...
Setting up libslirp0:amd64 (4.6.1-1build1) ...
Setting up pigz (2.6-1) ...
Setting up dbus-x11 (1.12.20-2ubuntu4.1) ...
Setting up systemd-sysv (249.11-0ubuntu3.6) ...
Setting up slirp4netns (1.0.1-2) ...
Setting up libdbus-1-dev:amd64 (1.12.20-2ubuntu4.1) ...
Setting up docker-ce (5:20.10.21~3-0~ubuntu-jammy) ...
Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service.
Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket.
invoke-rc.d: could not determine current runlevel
Setting up libpam-systemd:amd64 (249.11-0ubuntu3.6) ...
Setting up dbus-user-session (1.12.20-2ubuntu4.1) ...
Setting up docker-ce-rootless-extras (5:20.10.21~3-0~ubuntu-jammy) ...
Processing triggers for man-db (2.10.2-1) ...
Processing triggers for sgml-base (1.30) ...
Processing triggers for libc-bin (2.35-0ubuntu3) ...
/sbin/ldconfig.real: /usr/lib/wsl/lib/libcuda.so.1 is not a symbolic link

Scanning processes...
Scanning processor microcode...
Scanning linux images...

Failed to retrieve available kernel versions.

Failed to check for processor microcode upgrades.

No services need to be restarted.

No containers need to be restarted.

No user sessions are running outdated binaries.

No VM guests are running outdated hypervisor (qemu) binaries on this host.
➜  build git:(master) ✗