Virtual Keyboards on iPhone and Android

Vue3 + Element Plus后台项目实战:用simple-keyboard搞定触屏虚拟键盘(附中英文切换完整代码) 本文详细介绍了如何在Vue3 + Element Plus后台项目中集成simple-keyboard虚拟键盘组件,实现触屏设备的高效输入解决方案。通过实战代码演示了基础集成、与Element Plus表单的深度联动、中英文切换功能实现以及样式定制与性能优化技巧,特别适合医疗挂号终端、商场导览系统等场景应用。 阅读详情


这个老外写的东西值得学习。先转过来。

http://ignorethecode.net/blog/2009/08/07/virtual-keyboards-on-iphone-and-android/


Virtual Keyboards on iPhone and Android

I have written about virtual keyboards before. Their main advantage is that they allow for devices with huge screens while retaining slender hardware. A hardware keyboard forces manufacturers to create complex foldout systems which use physical space. Virtual keyboards avoid this complication. On the other hand, they replace a very obvious user interface element - a physical keyboard - with a more ephemeral input mechanism. Instead of having actual keys you can touch, feel and push, you have a bunch of pixels on a screen. In order to allow users to interact efficiently with such a system, it needs to work perfectly, and it needs to employ a number of tricks to help users get around the inherent limitations of such an unfamiliar input mechanism.

Comparing the iPhone to the HTC Magic, a phone running Android1, shows the problems that a virtual keyboard can cause, and how they can be solved. Typing on the iPhone – especially in English – works perfectly well, perhaps better than on a physical keyboard. Doing the same thing on an HTC Magic is often annoying and wrought with errors. Note that some of the Magic’s problems are not specific to Android, but to the Magic.

Size

The HTC Magic and the iPhone have the same screen size in terms of pixels:

iPhone screen and Android screen

What’s more, the pixel sizes of the individual keyboards and even the individual keys are almost identical, although Android conveniently adds comma and period keys next to the space bar:

iPhone keyboard and Android keyboard

However, the HTC Magic’s screen is only 90% as tall and wide as the iPhone’s. This doesn’t seem like a huge difference, but it actually has noticeable effects on usability. This is a comparison of the screens of the two devices, scaled to match the proportions of the real devices:

iPhone screen and Android screen scaled

And here’s the keyboards, again scaled to match the real-life proportions of the two devices:

iPhone screen and Android screen scaled

Even though the difference in length and width is only 10%2, the HTC Magic’s keyboard is quite a bit smaller. This causes two problems. First, it’s a lot harder for me to hit the proper keys. While I usually hit the correct keys on the iPhone, I often miss the keys when using the Magic.

A second, slightly smaller effect of this is that my thumb obscures more of the Magic’s screen than of the iPhone’s screen:

Obscuring the Screen(Hover your mouse over the image to see keyboard and finger outlines.)

My thumb obscures a large area of the Android keyboard. This makes it harder to see what key I’m actually touching, and it makes it harder to see where exactly the individual keys are. Admittedly, I have large hands, andsome people may actually prefer the HTC Magic’s smaller screen, but even for them, the larger screen would allow for more precise typing.

Focus

When typing on a physical keyboard, the user’s focus is on the actual text that appears on the screen, not on the keyboard. There is no need to look at the keyboard. The keys don’t move, and the physical features of the keyboard ensure that her hands stay in place, too. The same is not true for virtual keyboards. Even minuscule shifts in the position of your fingers can cause you to miss keys. What’s more, the keyboard itself can change. In most cases, users of virtual keyboards will focus on the keyboard, not on the text that appears on the screen.

This means that mistyped characters need to be obvious even when the user is only looking at the keyboard and ignoring the typed text that appears elsewhere on the device’s screen. Since the user’s fingers obscure the keys, simply highlighting the keys when she touches them is not enough feedback. Instead, each character typed by the user is shown above its key. Here’s what this looks like on both devices:

Keyboard Tap

Unfortunately, while the iPhone shows the key’s letter immediately when the finger touches the screen, there’s a short delay on my Android phone. At first, I suspected that this sluggishness was caused by slow hardware, but the delay occurs even in the simulator, so I suspect it is intentional. The delay is so bad that as soon as you start to type quickly, the popup doesn’t appear anymore at all.

This simple change essentially makes the character popup useless and forces the user to constantly switch focus between the keyboard and the text appearing somewhere else on the device’s screen, which slows down typing speed and constantly causes me to either miss keys, or miss typos, or both - depending on whether I’m looking at the keyboard, the text, or both.

Speed

While the iPhone’s keyboard hasn’t always been performing as well as it does now, at least on the 3GS, there is absolutely no delay between hitting a key, and the character appearing on screen. The iPhone can show typed characters as quickly as you can type them. This is not the case on the Android device, which causes a number of problems.

First of all, you often don’t see typos until you’ve typed a number of additional characters, since the Magic simply can’t keep up.

Second, the Magic sometimes automatically corrects things the user has typed. The slow speed of the device causes the phone to correct words even after you’ve started to type the next word, so it’s often not obvious what will happen to a word once you’ve finished typing it since the phone is lagging behind.

In effect, you often don’t see what you’re actually typing, and even if you’re typing correctly, there’s a chance the Magic will replace the correct word with a wrong one long after you’ve finished typing it.

Auto-Correction

One area where the Android device beats the iPhone is auto-correction. While the iPhone only suggests at most one correction for every word the user types, Android suggests a number of words, and starts suggesting them even while the user is still typing.

Suggestions

Often, longer words can be typed by beginning to type them, and then selecting the proper word from the list of words provided by Android. Admittedly, I’m not sure whether this is a net gain in productivity (since you’re basically replacing the time you spend typing a word with the time you spend checking the list of suggested words, which may or may not be faster), but it does feel better.

While the iPhone (sometimes) manages to learn new words if you use them regularly, the Android device has a user-editable list of «custom» words. It’s possible to manually add words to the user dictionary. Like the iPhone, Android has a tendency to duck around with the things you type, but at least it’s possible to fix this problem without workarounds. Touching and holding a word opens a menu which allows you to add it to the user dictionary.

Both phones insert apostrophes for words like «can’t», but unlike the iPhone, Android doesn’t insist on replacing every perfectly good «its» with «it’s». Both operating systems have punctuation shortcuts (specifically, two spaces get turned into a period followed by a space).

Dynamic Key Resizing

The iPhone changes the size of the «touchable» area of each individual key while you type to make it easier for you to hit keys it thinks you might want to hit. David Pogue describes it like this:

Although you don’t see it with your eyes, the sizes of the keys on the iPhone keyboard are changing all the time. That is, the software enlarges the «landing area» of certain keys, based on probability.

For example, if you type the letter «N», the next letter is unlikely to be «H», but quite likely to be «G». Accordingly, the iPhone will increase or decrease the target areas of these keys. If you type «N» and then hit the space between «G» and «H», the iPhone will assume that you meant to type «G» because «NG» is a common letter combination in English, while «NH» is uncommon (except for people living in New Hampshire).3

While this often cheats you into hitting wrong keys when typing in a language the iPhone doesn’t support,4 it’s a huge help for the languages it doessupport. As far as I can tell, Android doesn’t seem to do this kind of key resizing at all – you never know how much you’ve been relying on this feature until you use a virtual keyboard that doesn’t have it.

Language Support

On the iPhone, the language of the on-screen keyboard can be switched on the fly, which also switches the dictionary to the corresponding language.Olivier Tharan writes that Android does not offer on the fly language switching for the keyboard. Even changing the locale doesn’t change the keyboard layout.5

Both keyboards allow access to umlauts by holding down a key, and both let you switch to a secondary keyboard with numbers and special characters. On the iPhone, you can slide your finger from the «numbers keyboard» key to a number or special character, and it will type that character and then switch back to the normal keyboard automatically. Android does not offer this shortcut.

Landscape Keyboard

Both systems offer support for a «landscape» keyboard. Turning the phone sideways will switch to a wide-screen version of the virtual keyboard. The additional horizontal space is used to display larger keys, which makes it easier to hit the correct keys. Applications need to support the landscape keyboard both on the iPhone and on Android devices, and not all apps do. In fact, some Android apps don’t like the virtual keyboard at all and exhibit strange behaviour when it appears. Presumably, they were made with the G1 in mind, a device with a physical keyboard. I would guess that these apps will eventually be updated to accomodate the virtual keyboard.

Multitouch

The iPhone uses multitouch6 for its virtual keyboard in two different ways:

  1. It’s possible to hit modifier keys and letters at the same time. While you can hit ⇧-h to get a H on the iPhone, you have to first hit the shift key, release it, and then hit «H» to get a capital H on an Android device.7
  2. It’s possible to type with two thumbs without missing characters. If you type «to» on an iPhone, you can type «t» with your left thumb, and then hit «o» with your right thumb while your left thumb is still on «t». The iPhone will recognize both characters. Android, meanwhile, will silently eat one of the two.

Android currently lacks multitouch support altogether, ostensibly because Apple asked Google not to implement it.

Conclusion

A virtual keyboard lives and dies by the details. It’s not that there’s a single feature which makes the iPhone’s virtual keyboard better than Android’s; it’s death by a thousand cuts. A number of small differences end up making a huge difference.8 Apple obviously spent a lot of time getting every little detail just right (well, except for the ducking dictionary), while Google decided to go ahead with what they had – which is usable, but no match for what the iPhone offers. I have no doubt that Android’s virtual keyboard will be improved in the future, and I’m looking forward to what they will come up with.

Update

Since this article was written, the default Android keyboard has improved quite a bit. Ubuntucat reviews the improvements.


  1. Using the default Android virtual keyboard, which can be replaced. Not all Android devices ship with this keyboard. back

  2. Which translates to roughly a 20% difference in surface area. However, since you’re likely to miss a key due to hitting to the left or the right of it, and unlikely to miss by hitting above or below, I think the 10% difference in width is the more pertinent number than the 20% difference in surface area. back

  3. I’m using bigram frequencies for this example, but I don’t actually know what the iPhone uses, so the specific implementation could be different from what I have described. back

  4. Because letter combination frequencies are different in different languages. back

  5. My Android phone currently only has English installed, so there’s not a lot I can say on this topic. back

  6. Thanks to taitoh for pointing out that I completely forgot to mention multitouch in the first version of this article. back

  7. And while I’m mentioning the shift key: Henning Hoefer points out that on Android, the labels on the keys reflect whether the shift key is active. The iPhone only shows this in the form of a glowing shift key, which one might easily overlook or accidentally cover with a finger. back

  8. Quote blatantly stolen from David Weiss. back

If you require a short url to link to this article, please use http://ignco.de/139

designed_for_use_small

If you liked this, you'll love my book. It's called Designed for Use: Create Usable Interfaces for Applications and the Web. In it, I cover the whole design process, from user research and sketching to usability tests and A/B testing. But I don't just explain techniques, I also talk about concepts like discoverability, when and how to use animations, what we can learn from video games, and much more.

You can find out more about it (and order it directly, printed or as a DRM-free ebook) on the Pragmatic Programmers website.


Arm Inline hook的简易原理图 Arm架构下有arm指令和thumb指令之分,不同指令集的hook过程不一样。 假设我们要hook libc.so中的execv和read函数,android系统的库应该都加了-mthumb-interworking编译选项,支持thumb/arm的代码交织,所以要区分目标函数是thumb还是arm指令的。 用ndk编译自己的代码好像默认的是arm(虽然我网上查的说默认是thumb,但我的库编 阅读详情

相关推荐

VB键盘钩子(下载的).zip

VB键盘钩子(下载的).zip

Thumb和ARM指令不能切换问题(error:unsupported interworking call (Thumb -> ARM))

报错现象 xxx.ko:ection 3 reloc 4 sym 'xxxxxx': unsupported interworking call (Thumb -> ARM) 报错原因和分析 解决办法 arm指令集和thumb指令集 代码交织

weixin_42031299的博客 1302

virtual-keyboard-plugin:一个简单的虚拟键盘插件,用于输入和文本区域

虚拟键盘插件 一个简单的虚拟键盘插件,用于输入和文本区域 预习 演示链接 安装 npm $ npm install virtual-keyboard-plugin --save 纱 $ yarn add virtual-keyboard-plugin --save 取消CDN 您还可以通过使用CDN上的存储库来跳过yarn / npm安装 < link rel =" stylesheet " href =" https://unpkg.com/virtual-keyboard-plugin@1.2.1/dist/virtual-keyboard.css " > < link rel =" stylesheet " href =" https://maxcdn.bootstrapcdn.com/font-awesome/4.7.0/css/font-awesome.min.css "

嵌入式处理器漫谈

<br />提纲<br />嵌入式处理器分类<br />应用领域<br />案例剖析<br />展望<br />一、嵌入式处理器内核分类<br />按照体系结构分类,不涉及具体的处理器芯片。嵌入式领域全部是RISC指令集的处理器内核。<br />MIPS:www.mips.com , 只设计内核的美国公司<br />ARM:www.arm.com , 只设计内核的英国公司<br />PowerPC:为IBM和Motorola公司共有的内核<br />68K/COLDFIRE:Motorola公司独有

Yasin Lee 1305

VB虚拟键盘程序.7z

一款VB专用的虚拟键盘程序,可以用到触摸屏,也可以用到一些需要辅助键盘输入的地方,是一个控件的源代码,下载看看便知。

反激变压器设计学习笔记

反激变压器匝比感量设计

m0_55419117的博客 5266

模块的加载过程三

这种情况下simplify_symbols函数会调用resolve_symbol函数来处理该未定义符号,后者会调用find_symbol函数去查找该符号(详细的查找过程见本章前面的"find_symbol函数”部分),如果找到了,就把它在内存中的实际地址赋值给st_valueo如此,经过simplify_symbols函数的调用之后,内核模块符号表中的所有符号就都有了正确的st_value值,也即都有了正确的内存地址。这是个很严重的问题。如此,内核模块导出符号的地址在系统执行完重定位之后被更新为正确的值。

weixin_52849254的博客 1251

Freemarker整合poi导出带有图片的Excel教程

Freemarker整合poi导出带有图片的Excel教程 https://blog.youkuaiyun.com/x541211190/article/details/105675771根据此人博客可完成此功能,但原文中有一处错误需要纠正,当单元格合并时,计算起始单元格有错误。 源代码: /** * 构造合并单元格集合 * * @param createRowIndex: * @param cellRangeAddresses: * @param startIndex: * @param c

weixin_39403349的博客 1004

ARM / Thumb 指令混合编程之代码交织 ( interworking )

本文翻译整理自 http://stuff.mit.edu/afs/sipb/project/egcs/src/egcs/gcc/config/arm/README-interworking 针对ARM7T处理器,Cygnus GNU Pro ToolKit 支持在已编译的 arm 指令和 thumb 指令之间进行来回切换。 虽然原文只针对相对古老的 ARM7T 处理器进行介绍,但是

cfy_phonex的专栏 8001

香橙派5Max + Realsense D435i + Fast-Drone-250:手把手教你搭建一个完整的无人机视觉开发环境

本文详细介绍了如何利用香橙派5Max、Realsense D435i深度相机和Fast-Drone-250项目搭建完整的无人机视觉开发环境。从硬件连接到ROS配置,再到项目部署与性能优化,提供全栈式实战指南,助力开发者快速实现SLAM算法验证和自主导航功能开发。

weixin_30879169的博客 465

uniapp:实现APP获取陀螺仪数据、加速传感器、线性加速传感器,uniApp实时监听陀螺仪【XYZ】数据及停止监听与资源释放等功能示例源码,根据需求做功能(完美兼容Android安卓、苹果ios)

uniapp陀螺仪,uniapp加速传感器,uniapp线性加速传感器,APP陀螺仪数据,uniapp app 端获取陀螺仪数据示例代码,手机中获取陀螺仪的数据,uniApp实时获取陀螺仪xyz数据,android陀螺仪方向,获得陀螺仪传感器,处理传感器数据,停止监听与资源释放,Android使用陀螺仪,uniapp苹果ios陀螺仪,uni-app设备之(加速计,罗盘,陀螺仪)插件安卓/IOS APP提供了获取陀螺仪数据的能力,手机陀螺仪传感器获得手机自身旋转的角度,陀螺仪获取旋转角度,陀螺仪、加速度传感器

✅ 精选推荐文章 4270

ARM状态和THUMB状态

ARM处理器的工作状态 在ARM的体系结构中,可以工作在三种不同的状态,一是ARM状态,二是Thumb状态及Thumb-2状态,三是调试状态。 《嵌入式系统开发与应用教程(第2版)》上介绍说:有两种状态ARM状态和Thumb状态,当时初学甚为不解,现在一知半解时再看忽然想到了显示中的例子: ARM核就好比一个高中学校,那种包含普通高中和职业高中的。普通高中就相当于...

weixin_30847865的博客 908

RT-DETR 模型剪枝优化:结构化剪枝对 R18/R50 性能的影响

本文提出分层结构化剪枝策略R18:参数量减少 42%(28M→16.2M),推理速度提升 35%(15→20.3 FPS@Jetson Nano),mAP@0.5 仅降 1.2%;R50:参数量减少 55%(170M→76.5M),推理速度提升 48%(42→62.2 FPS@T4),mAP@0.5 仅降 2.1%。核心价值:为 RT-DETR 提供“精度-效率-部署”平衡的轻量化方案,推动其在边缘设备、工业质检等场景的大规模落地。部署建议。

走向CTO的路上... 466

HP6515b在ubuntu下安装无线网卡驱动

<br />在网上转载来下面到那篇文章后我才发现其实安装bcm的无线网卡远没有那么麻烦!<br /> 安装完buntu 后先插上网线用有线网络升级系统到最新,重启系统后你可以看到在"系统"->“系统管理”->“硬件驱动”中已经给你准备好了驱动,你只要 “激活”以下即可!然后即可启动无线网卡!<br /> //----------------------------------------------------------------------------------------------

Yasin Lee 2029

机器学习kaggle报告-Facial Keypoints Detection【完整解题过程+代码】

在处理面部关键点检测任务时,首先需要将存储在 CSV 文件中的图像数据转换为可以显示和分析的图像。数据集中每个图像是以一个一维数组的形式存储,其中包含了图像的所有像素值。为了将这些数据转化为实际的图像,我们需要按照一定的规则将这些像素值重新排列为一个二维矩阵(即图像的行列)。下面是一个案例,展示了如何将数据集中的图像数据转化为图片。转化过程读取CSV文件:首先,我们需要读取包含图像数据的 CSV 文件,通常该文件包含多张图像的像素值。每一行表示一张图像,并且包含图像的像素值列表。提取图像数据。

一键难忘的博客 3360

【系统架构设计师】二十三、通信系统架构设计理论与实践①

通信网络主要形式:局域网、广域网、移动通信网。 局域网网络架构有 4 种类型:单核心架构、双核心架构、环型架构、层次型架构。 广域网属于多级网络,通常由骨干网、分布网、接入网组成。在网络规模较小时,可仅由骨干网和接入网组成。通常,在大型网络构建中,通过广域网将分布在各地域的局域网互连起来,形成一个大的网络。 移动通信网为移动互联网提供了强有力的支持,尤其是5G 网络为个人用户、垂直行业等 提供了多样化的服务。

帅次的博客 3766

STM32 USB 程序将BULK EP改成双缓冲机制后,接收OUT数据的速度从原先的500KB/S,

前天测试自己编写的USB驱动程序时候发现从主机到STM32的OUT传输(主机到设备)速率竟然只有最高33KB/S,实在是晕死了。经过研究后发现是驱动程序中设置的PIPE MaxTransferSize参数的关系,原先设置64只能33KB/S,后参考其他USB设备驱动程序的值,设置成了65535,再测试USB OUT的速度,达到了500KB/S,终于解决了驱动程序的瓶颈。不过算下USB 2.0全速的

东方未晞的老窝 6372

第244篇 视觉SLAM后端之BA优化——Bundle Adjustment的原理

本文介绍了SLAM后端优化中的Bundle Adjustment(BA)技术。BA通过同时优化相机位姿和3D路标点位置,最小化重投影误差,解决前端估计的累积误差问题。文章详细讲解了BA的数学原理,包括目标函数构建、Gauss-Newton法和Levenberg-Marquardt法求解过程,以及利用稀疏性和Schur补加速计算的关键技术。对比了全量BA和增量BA的优缺点,并介绍了Ceres、g2o等工程实现工具。BA作为SLAM后端的核心算法,其理解深度直接影响系统性能优化能力。

郑伟强dev的专栏 354

ARM与Thumb之间的状态转换

由于Thumb指令在某些特殊情况下可能比ARM指令更有效,所以它在很多方面得到了广泛的应用。但是Thumb知识ARM指令集的一个子集,它不能独立组成一个应用系统,所以在很多情况下应用程序需要二者的混合编程,这就必然存在ARM与Thumb状态之间函数调用的问题。下面将分别详细介绍。1)      状态切换的实现ARM/Thumb之间的状态切换是通过一条专用的转移交换指令BX来实现的。BX指令以通用寄

Linux Openharmony Android Graphics Stack! 1万+

Data-Structures-and-Algorithm-Analysis-in-Java.pdf

作者: Weiss, Mark A. 出版社: Addison Wesley Data Structures and Algorithm Analysis in Java is an “advanced algorithms” book that fits between traditional CS2 and Algorithms Analysis courses. In the old ACM Curriculum Guidelines, this course was known as CS7. This text is for readers who want to learn good programming and algorithm analysis skills simultaneously so that they can develop such programs with the maximum amo...

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

char *p

char *p;p="hello";  //这是正确的 系统先给字符串分配存储空间,并将字符串的首地址赋值给p。————————————————char *p;scanf("%s",p);      //这个不对,因为scanf将来会将一个字符串存储到p所指空间,然而那时候,p却没有指向任何位置! ————————————————char *p;char

Yasin Lee 1365

廖雪峰Python教程[完整版]

廖雪峰的python教程整理的,已经排好版了,而且还是完整的,适合小白

ARM Linux启动过程分析

jun2ran的专栏 738

pscad IEEE标准系统搭建说明

pscad IEEE标准系统搭建说明,包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。

fread函数和fwrite函数

<br />fread函数和fwrite函数 1.函数功能 用来读写一个数据块。 2.一般调用形式 fread(buffer,size,count,fp); fwrite(buffer,size,count,fp); 3.说明 (1)buffer:是一个指针,对fread来说,它是读入数据的存放地址。对fwrite来说,是要输出数据的地址。 (2)size:要读写的字节数; (3)count:要进行读写多少个size字节的数据项; (4)fp:文件型指针。

Yasin Lee 1023

ARM处理器中ARM和Thumb状态的切换

<!-- /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso

carry1314lele的专栏 9976

unbalanced enable irq 问题的解决 以及共享的gpio中断引起的问题

最近在工作中使用irq时遇到如下问题,根据log显示应该是什么所谓的不平横问题,先前也没有仔细研究这个问题,只是定位到是enable_irq函数调用所致。 因为在项目中使用的中断是gpio中断,该中断在项目中的实现方式为多个gpio中断共享一个真实的物理中断,因此当这个真实的物理中断发生后由系统(就是另一个哥们写的irq驱动)查询到底是连接到这个物理中断上的哪一个具体的gpio产生的了中断(通过

Yasin Lee 8157

重载、覆盖、多态与函数隐藏(1)

要弄清楚重载、覆盖、多态与函数隐藏之间的复杂且微妙关系之前,我们首先要来回顾一下重载覆盖等基本概念。首先,我们来看一个非常简单的例子,理解一下什么叫函数隐藏hide。#include using namespace std;class Base{public:    void fun() { cout << "Base::fun()" };class

Yasin Lee 1022

kermit 安装 配置 使用

安装: sudo apt-get install ckermit 配置: kermit在启动时会查找~/.kermrc文件,调用里面的命令来初始化kermit。只要将你所需的命令写到~/.kermrc文件里,启动后就可以省去一个一个敲命令的麻烦了! # vi ~/.kermrc set line /dev/ttyS0       ( 如果用的是 串口和usb转接线 的话这里应该为s

Yasin Lee 1607
上一篇: android中如何设计触摸屏驱动touch screen driver
下一篇: Ubuntu配置双网卡同时使用
YasinLeeX
博客等级 码龄19年 380粉丝 310原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

YasinLeeX

再来一杯西湖龙井。

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值