相关推荐
AttifyOS 3.0实战:从固件提取到物联网设备安全评估全流程解析
本文详细解析了使用AttifyOS 3.0进行物联网设备安全评估的全流程。从获取D-Link路由器固件开始,到利用其预置的Binwalk等工具完成固件提取、解包Squashfs文件系统,并深入分析Web源码进行初步安全审计。这套集成系统极大简化了环境配置,让研究人员能专注于漏洞挖掘本身,是物联网安全评估的高效工具箱。
熵编码(五)-CABAC(一) 基础篇
前两篇算术编码文章介绍了算术编码原理和步骤。本篇文章介绍CABAC,基于上下文自适应的二进制算术编码。本文对CABAC的基本原理进行了详细的介绍和分析,下篇文章将会对H264编码中的CABAC熵编码的实际应用进行介绍。
PICO4 VR开发调试神器:用Live Preview Plugin实现电脑串流,告别反复打包烧录的繁琐流程
本文详细介绍了PICO4 VR开发中如何使用Live Preview Plugin实现电脑串流,显著提升开发效率。通过实时预览和调试功能,开发者可以避免反复打包烧录的繁琐流程,特别适用于Unity环境下的VR应用开发。文章涵盖环境配置、连接设置、实时调试技巧及性能优化方案,是PICO4开发者的必备指南。
格拉姆角场(GAF)实战:用Python实现时间序列图像化处理
本文深入解析了格拉姆角场(GAF)技术,这是一种将一维时间序列转化为二维图像特征的方法,以便利用卷积神经网络(CNN)等图像模型进行深度分析。文章通过Python实战代码,详细演示了GASF和GADF两种核心转换的实现过程,并探讨了其在时序数据分类任务中的应用,为故障预警、金融模式识别等场景提供了强大的图像驱动分析视角。
关于Win11安装Ubuntu子系统报错:WslRegisterDistribution failed with error 解决办法
Win11安装Ubuntu子系统报错:WslRegisterDistribution failed with error
OPC通信从入门到精通_1_OPC基础知识及简单C#程序编写(OPCDA,OPCUA简介;OPC通信数据流框架图;C#程序编写)
ModbusTCP通信是采用直接方式进行通信,用OPC的方式如何去做呢?PLC作为ModbusTCP服务器,用KepServer作为ModbusTCP客户端,同时作为OPC服务器,PC作为OPC客户端新建项目,加载dll库(利用COM技术写的)添加引用,查看到其中包含了众多方法其中OPCGroups继承于IOPCGroups接口。
从零搭建:C#+YOLOv8质检系统(从相机选型到上位机部署,附完整开发流程与源码)
后来换成45°斜射的条形光源,光线从侧面打在引脚上,弯曲处会形成暗区,缺陷边缘立刻清晰——光源预算别省,我这套光源+支架才600块,比换相机划算多了。前阵子帮一家电子厂做连接器引脚缺陷检测,他们原来靠2个师傅用放大镜看,每天8小时最多检5000个,0.2mm的针脚弯曲还经常漏检,不良品流到客户那里,单月罚款就超5万。做质检第一步不是挑设备,是先明确“要检测多大的缺陷”——比如我要检的连接器引脚,直径0.5mm,允许的最大弯曲是0.2mm,这直接决定相机分辨率。,后面C#就用这个模型推理。
在claude code desktop中安装pdf处理skill的实战教程
本文介绍了在Claude Code Desktop中安装PDF处理Skill的详细教程。针对国内用户使用第三方API时无法直接调用官方插件的问题,提供了完整的解决方案。教程从下载Anthropic官方Skills源码开始,逐步演示了如何将PDF处理模块打包、上传至Claude Code Desktop,并最终成功加载使用。整个过程采用全流程拆解方式,确保新手也能快速上手。通过本文,读者可以掌握在非官方环境下扩展Claude Code功能的方法,从而提升工作效率
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
WINCC7.3破解文件
WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!
efm32 入门.pdf
本PDF共计22页,介绍的是操作驱动API,下载与否自己斟酌。
霍尼韦尔SoftMaster使用说明
霍尼韦尔SoftMaster使用说明



订阅专栏 解锁全文
218



被折叠的 条评论
为什么被折叠?



