【转】在Windows Mobile 6上通过CEMAPI 发送短信

CMAPI实战攻略——写在前面的话(提纲) Cemapi实战攻略——提纲by 吴春雷QQ:819543772EMail:wuchunlei@163.com写在前面的话:         最近正在搞基于Windows Moblie 5.0平台的手机应用程序的开发,其中用到了Cemapi库来开发短信相关应用的模块。由于以前一直在搞业务逻辑方面的开发,因此对cemapi了解的比较少。再开发的过程中,不可避免的遇到了一些问题,也 阅读详情

原文:http://blog.youkuaiyun.com/cjwn/archive/2009/02/08/3868466.aspx

 

在Windows Mobile 6上通过CEMAPI POOM发送短信

在Winodws Mobile上第三方软件一般是通过
1)调用SmsMessageSend API函数发送短信。
或者通过
2)CreateProcess或者ShellExecuteEx方式,调用命令(不含尖括号)
</windows/tmail.exe -service "SMS" -to "短信接收方号码" -body "短信内容">

下面的例子,就是调用Windows Mobile自带的短信程序(tmail.exe),编辑一条收件人为10086,短信内容为 CXYE,查询余额的短信。
/windows/tmail.exe -service "SMS" -to "10086" -body "KTIP1000"
最终效果如截图。
<Place Holder for SMS Send UI>

1)和2)这两种方法都有各自的优缺点。
第一种方法,短信发送成功后在微软自带的已发送邮件箱(Sent Items)中找不到已经发送的短信。发送失败也没有提示。当然可以自己硬行构造POOM的短信对象来实现这个不足。
第二种方法,就是通过tmail.exe -service "SMS" -to "" -body "" 的方法不能够自动发送短信,只是停留在编辑完成界面,还需要用户手动点击"发送"按钮,或者通过程序实现。

下面介绍一种方法既能够让已发短信出现在已发送邮件箱中,也能够将短信编辑完成后自动发送。
这就是通过CEMAPI来发送短信。这个在www.codeproject.com 上05年的一篇文章已经实现了。请原文请参考 http://www.codeproject.com/KB/mobile/SMS_CEMPI.aspx .

我使用和实践了这段代码,发现几个问题。
1)发送短信不成功后,短信会到草稿箱,但是点开改短信,再次发送时,就无法发送了。
<Place Holder for Screen shot>
此时,短信的内容放置到了主题(Subject)上,这和普通使用时候遇到的情况不一样,短信内容应该在正文(Body)中.
2)短信发送时候,需要设置一个参数,那就是本机号码。至于如何获得本机号码,是非常麻烦的。
3)此Sample是在EVC下编译的,而且缺少.rc2文件。虽然作者已经说明了如何解决。

但是我还是重新改写了以下,将所有的CComPtr<IMAPISession> 之类的定义改成了WM6上建议的IMAPISession
改正了 SendSMSMessage 函数的HRESULT 类型返回值 Return S_OK.

但是1)和2)的问题仍旧需要解决。
// --- SMSHelper.cpp ---
#include "Log.h"
#include "SMSHelper.h"
/////////////////////////////////////////////////////////////////////////////////////////////
// This function is used to get the msgstore named SMS from msgstores on the
// device.
// I could have used just raw pointers but it is much easier and safer to just
// use smart pointers.
HRESULT GetSMSMsgStore( IMAPISession* pSession, IMsgStore ** ppMsgStore)
{
 // first we get the msgstores table from the session
 IMAPITable * pTable=NULL;
 HRESULT hr = pSession->GetMsgStoresTable(MAPI_UNICODE, &pTable);
 if (FAILED(hr) && pTable!=NULL )
 {
  //MessageBox(NULL, L"Failed: GetMsgStoresTable", L"GetSMSMsgStore", MB_OK);
  WriteString( L"Failed: GetMsgStoresTable - GetSMSMsgStore" );
  return FALSE;
 }
 WriteString( L"Passed: GetMsgStoresTable - GetSMSMsgStore" );
 // next we loop over the message stores opening each msgstore and
 // getting its name to see if the name matches SMS.
 // If it does then we break out of the loop
 while (TRUE)
 {
  SRowSet* pRowSet = NULL;
  hr = pTable->QueryRows(1, 0, &pRowSet);
  // If we failed to query the
  // rows then we need to break
  if (FAILED(hr) && pRowSet!=NULL)
  {
   //MessageBox(NULL, L"Failed: QueryRows", L"GetSMSMsgStore", MB_OK);
   WriteString( L"Failed: QueryRows - GetSMSMsgStore" );
   break;
  }
  WriteString( L"Passed: QueryRows - GetSMSMsgStore" );
  // if we got no rows back then just exit the loop
  //remembering to set an error
  if (pRowSet->cRows == 1)
  {
   ASSERT(pRowSet->aRow[0].lpProps->ulPropTag == PR_ENTRYID);
   SBinary& blob = pRowSet->aRow[0].lpProps->Value.bin;
   hr = pSession->OpenMsgStore(NULL, blob.cb, (LPENTRYID)blob.lpb, NULL, 0,ppMsgStore);
   if (FAILED(hr))
   {
    //MessageBox(NULL, L"Failed: OpenMsgStore", L"GetSMSMsgStore", MB_OK);
    WriteString( L"Failed: OpenMsgStore - GetSMSMsgStore" );
   }
   WriteString( L"Passed: OpenMsgStore - GetSMSMsgStore" );
  }
  else
  {
   //MessageBox(NULL, L"pRowSet->cRows != 1", L"GetSMSMsgStore", MB_OK);
   WriteString( L"pRowSet->cRows != 1 - GetSMSMsgStore" );
   hr = HRESULT_FROM_WIN32(ERROR_NOT_FOUND);
  }
  // now remember to free the row set
  FreeProws(pRowSet);
  if (FAILED(hr))
  {
   break;
  }
  // now get the display name property from the
  // message store to compare it against the name
  // 'SMS'
  SPropTagArray props;
  props.cValues = 1;
  props.aulPropTag[0] = PR_DISPLAY_NAME;
  ULONG cValues;
  SPropValue* pProps = NULL;
  hr = (*ppMsgStore)->GetProps(&props, MAPI_UNICODE, &cValues, &pProps);
  if (FAILED(hr) || cValues != 1)
  {
   //MessageBox(NULL, L"Failed: GetProps", L"GetSMSMsgStore", MB_OK);
   WriteString( L"Failed: GetProps - GetSMSMsgStore" );
   break;
  }
  WriteString( L"Passed: GetProps - GetSMSMsgStore" );
  // if the name matches SMS then break and as
  // hr == S_OK the current MsgStore smart pointer
  // will correctly be set.
  if (_tcsicmp(pProps[0].Value.lpszW, _T("SMS")) == 0)
  {
   break;
  }
 }
 // if we failed for some reason then we clear out
 // the msgstore smartpointer and return the error.
 if (FAILED(hr) )
 {
  (*ppMsgStore)->Release();
 }
 return hr;
}
/////////////////////////////////////////////////////////////////////////////////////////////
// This function is used to get the folder named drafts from the msgstore on the
// device.
// I could have used just raw pointers but it is much easier and safer to just
// use smart pointers.
HRESULT GetSMSFolder(IMsgStore* pMsgStore, IMAPIFolder** ppFolder)
{
 // Now get the Drafts folder.
 SPropTagArray propDefaultFolder;
 propDefaultFolder.cValues = 1;
 propDefaultFolder.aulPropTag[0] = PR_CE_IPM_DRAFTS_ENTRYID;
 ULONG   cValues;
 LPSPropValue pPropVals;
 HRESULT hr = pMsgStore->GetProps (&propDefaultFolder, MAPI_UNICODE, &cValues, &pPropVals);
 if (FAILED(hr))
 {
  //MessageBox(NULL, L"Failed: GetProps", L"GetSMSFolder", MB_OK);
  WriteString( L"Failed: GetProps - GetSMSFolder" );
  return hr;
 }
 WriteString( L"Passed: GetProps - GetSMSFolder" );
 SBinary& eidDrafts = pPropVals->Value.bin;
 hr = pMsgStore->OpenEntry(eidDrafts.cb, (LPENTRYID)eidDrafts.lpb, NULL, MAPI_MODIFY, NULL, (LPUNKNOWN*)ppFolder);
 if (FAILED(hr))
 {
  //MessageBox(NULL, L"Failed: OpenEntry", L"GetSMSFolder", MB_OK);
  WriteString( L"Failed: OpenEntry - GetSMSFolder" );
 }
 WriteString( L"Passed: OpenEntry - GetSMSFolder" );
 return hr;
}
/////////////////////////////////////////////////////////////////////////////////////////////
// This function is used to get the send the message.
// This uses an opened MAPI session
HRESULT SendSMSMessage( ICEMAPISession * pSession, LPCTSTR lpszFrom, LPCTSTR lpszTo, LPCTSTR lpszMessage)
{
 // now get the SMS message store
 IMsgStore* pMsgStore = NULL;
 HRESULT hr = GetSMSMsgStore(pSession, &pMsgStore);
 if (FAILED(hr) && pMsgStore!=NULL)
 {
  //MessageBox(NULL, L"Failed: GetSMSMsgStore", L"SendSMSMessage", MB_OK);
  WriteString( L"Failed: GetSMSMsgStore - SendSMSMessage" );
  return hr;
 }
 WriteString( L"Passed: GetSMSMsgStore - SendSMSMessage" );
 
 IMAPIFolder* pFolder=NULL;
 hr = GetSMSFolder(pMsgStore, &pFolder);
 if (FAILED(hr) && pFolder!=NULL )
 {
  //MessageBox(NULL, L"Failed: GetSMSFolder", L"SendSMSMessage", MB_OK);
  WriteString( L"Failed: GetSMSFolder - SendSMSMessage" );
  return hr;
 }
 WriteString( L"Passed: GetSMSFolder - SendSMSMessage" );
 
 IMessage* pMessage=NULL;
 hr = pFolder->CreateMessage(NULL, 0 ,&pMessage);
 if (FAILED(hr) && pMessage!=NULL)
 {
  //MessageBox(NULL, L"Failed: CreateMessage", L"SendSMSMessage", MB_OK);
  WriteString( L"Failed: CreateMessage - SendSMSMessage" );
  return hr;
 }
 WriteString( L"Passed: CreateMessage - SendSMSMessage" );
 // set the recipients
 // set up the required fields for a recipient
 SPropValue propRecipient[3];
 // it is vital we clear the property structure
 // as there are fields we do not use but MAPI seems
 // to be sentative to them.
 ZeroMemory(&propRecipient, sizeof(propRecipient));
 // set the recipient type which coul be to, cc, bcc
 // but ehre must at least be a to field
 propRecipient[0].ulPropTag = PR_RECIPIENT_TYPE;
 propRecipient[0].Value.l = MAPI_TO;
 // we set the type of address to sms instead of
 // smtp
 propRecipient[1].ulPropTag = PR_ADDRTYPE;
 propRecipient[1].Value.lpszW = _T("SMS");
 // we finally set the email address to the
 // phone number of the person we are sending the message
 // to
 propRecipient[2].ulPropTag = PR_EMAIL_ADDRESS;
 propRecipient[2].Value.lpszW = (LPWSTR)lpszTo;
 // set the addrlist to point to the properties
 ADRLIST adrlist;
 adrlist.cEntries = 1;
 adrlist.aEntries[0].cValues = 3;
 adrlist.aEntries[0].rgPropVals = (LPSPropValue)(&propRecipient);
 // finally modify the recipients of the message
 hr = pMessage->ModifyRecipients(MODRECIP_ADD, &adrlist);
 if (FAILED(hr))
 {
  //MessageBox(NULL, L"Failed: ModifyRecipients", L"SendSMSMessage", MB_OK);
  WriteString( L"Failed: ModifyRecipients - SendSMSMessage" );
  return hr;
 }
 WriteString( L"Passed: ModifyRecipients - SendSMSMessage" );
 // now we set the additional properties for the
 // message
 SPropValue props[4];
 //note how we zero out the contents of the
 // structure as MAPI is sensative to the
 // contents of other fields we do not use.
 ZeroMemory(&props, sizeof(props));
 // first set the subject of the message
 // as the sms we are going to send
 props[0].ulPropTag = PR_SUBJECT;
 props[0].Value.lpszW = (LPWSTR)lpszMessage;
 // next set the senders email address to
 // the phone number of the person we are
 // sending the message to
 props[1].ulPropTag = PR_SENDER_EMAIL_ADDRESS;
 props[1].Value.lpszW = (LPWSTR)lpszFrom;
 // finally and most importantly tell mapi
 // this is a sms message in need of delivery
 props[2].ulPropTag = PR_MSG_STATUS;
 props[2].Value.ul = MSGSTATUS_RECTYPE_SMS;
    props[3].ulPropTag = PR_MESSAGE_FLAGS;
    props[3].Value.ul = MSGFLAG_FROMME | MSGFLAG_UNSENT;
 hr = pMessage->SetProps(sizeof(props) / sizeof(props[0]), (LPSPropValue)&props, NULL);
 if (FAILED(hr))
 {
  //MessageBox(NULL, L"Failed: SetProps", L"SendSMSMessage", MB_OK);
  WriteString( L"Failed: SetProps - SendSMSMessage" );
  return hr;
 }
 WriteString( L"Passed: SetProps - SendSMSMessage" );
 // having set all the required fields we can now
 // pass the message over to the msgstore transport
 // to be delivered.
 hr = pMessage->SubmitMessage(0);
 if (FAILED(hr))
 {
  //MessageBox(NULL, L"Failed: SubmitMessage", L"SendSMSMessage", MB_OK);
  WriteString( L"Failed: SubmitMessage - SendSMSMessage" );
  return hr;
 }
 WriteString( L"Passed: SubmitMessage - SendSMSMessage" );
 return S_OK;
}
/////////////////////////////////////////////////////////////////////////
// This is the function that creates the session, using the
// from, the recipient and the message.
// This opens the session, opens the sms message store and opens
// the drafts folder then create a new message and sets the sender,
// recipient and messag, then finally sends the message.
BOOL DoSendMessage(LPCTSTR lpszFrom, LPCTSTR lpszTo, LPCTSTR lpszMessage)
{
 HRESULT hr = MAPIInitialize(NULL);
 if (FAILED(hr))
 {
  //MessageBox(NULL, L"Failed: MAPIInitialize", L"DoSendMessage", MB_OK);
  WriteString( L"Failed: MAPIInitialize - DoSendMessage" );
  return hr;
 }
 WriteString( L"Passed: MAPIInitialize - DoSendMessage" );
 // Initialized the MAPI subsystem
 // CComPtr<IMAPISession> spSession;
 ICEMAPISession * pSession = NULL;
 BOOL bRet = FALSE;
 hr = MAPILogonEx(0 ,NULL, NULL, 0, (LPMAPISESSION *)&pSession);
 if (FAILED(hr))
 {
  //MessageBox(NULL, L"Failed: MAPILogonEx", L"DoSendMessage", MB_OK);
  WriteString( L"Failed: MAPILogonEx - DoSendMessage" );
 }
 else
 {
  WriteString( L"Passed: MAPILogonEx - DoSendMessage" );
  bRet = SUCCEEDED(SendSMSMessage(pSession, lpszFrom, lpszTo, lpszMessage));
  if( bRet )
   WriteString( L"Passed: SendSMSMessage - DoSendMessage" );
  else
   WriteString( L"Failed: SendSMSMessage - DoSendMessage" );
  pSession->Logoff(0, 0, 0);
  pSession->Release();
 }
 MAPIUninitialize();
 return bRet;
}

本文来自优快云博客,转载请标明出处:http://blog.youkuaiyun.com/cjwn/archive/2009/02/08/3868466.aspx

C++ muduo网络库知识分享01 - Linux平台下muduo网络库源码编译安装 Muduo is a multithreaded C++ network library based on the reactor pattern. muduo库的介绍就是:一个基于reactor反应堆模型的多线程C++网络库。 muduo网络库是C++语言开发的一个非常优秀的网络库,作者陈硕,muduo网络库在多线程环境下性能非常高,该系列文章会分享一些muduo库源码的知识,包括它的线程池源码... 阅读详情

相关推荐

ArcGIS Enterprise10.9.1的Windows安装部署

ArcGIS Enterprise10.9.1中Windows版本安装介绍。

qq_36250702的博客 2446

在Windows Mobile 6上通过CEMAPI POOM发送短信

在Windows Mobile 6上通过CEMAPI POOM发送短信在Winodws Mobile上第三方软件一般是通过1)调用SmsMessageSend API函数发送短信。或者通过2)CreateProcess或者ShellExecuteEx方式,调用命令(不含尖括号)下面的例子,就是调用Windows Mobile自带的短信程序(tmail.exe),编辑一条收件人为10086,

646

智能车‘大脑’的诞生:揭秘电磁循迹代码背后的控制论与系统思维

本文深入探讨智能车电磁循迹系统的核心架构与控制原理,揭示了其作为精密闭环系统如何通过模块化设计、信号处理、PID控制算法及电机驱动实现自主导航。重点分析了电磁信号采集与处理流程框架,为开发者提供从理论到实践的全面指南。

arduino9maker的博客 535

CEMAPI实战攻略(二)——建立与短信信箱的连接

CEMAPI实战攻略by 吴春雷QQ:819543772Email:wuchunlei@163.com二.建立与短信信箱的连接上一部分已经讨论过,如何搭建开发和测试环境,以及如何初始化CEMAPI,再继续这一部分的讨论之前,我们先要澄清几个概念。第一个是会话(Seesion),相信开发网络应用的朋友都不陌生,为了提高通讯效率降低通讯开销,有时候我们需要再目标与本地之间创建一个通

不迎不送,来去自便,无茶无酒,谈笑随缘 5630

yolov5 onnx推理时报错[ONNXRuntimeError] : 2 : INVALID_ARGUMENT : Unexpected input data type.

yolov5 onnxruntime 推理报错

zjulkw的博客 1224

CAM350常用快捷键

CAM350快捷键 CAM350常用快捷键

bhxc809751502的博客 3066

在Windows Mobile 6上通过CEMAPI 发送短信

在Windows Mobile 6上通过CEMAPI POOM发送短信在Winodws Mobile上第三方软件一般是通过1)调用SmsMessageSend API函数发送短信。或者通过2)CreateProcess或者ShellExecuteEx方式,调用命令(不含尖括号)下面的例子,就是调用Windows Mobile自带的短信程序(tmail.exe),编辑一条收件人为10086,短信内容

3753

使用 MATLAB/Simulink 构建一个电机-液压联合控制系统的仿真模型

本文详细介绍了基于Simulink的电机与液压执行机构联合控制系统建模方法。通过7个步骤,系统讲解了从创建项目、搭建PMSM电机模型、建立逆变器与矢量控制模块,到构建液压泵和执行机构模型的完整过程。重点展示了如何设置关键参数、添加测量反馈模块,并提供了实用的代码片段。教程还包含仿真运行流程、结果分析指标及进阶建议,帮助读者掌握多物理场耦合系统建模的核心技术。该方法适用于机电液一体化系统设计,为工程实践提供有效参考。

amy_mhd的博客 615

同步Windows Mobile SIM卡短信

同步Windows Mobile SIM卡短信作者:金海建背景:Windows Mobile默认情况下,SIM卡中的短信会同步到系统的短信数据库中。这个工作是由cprog.exe(电话程序)来完成,当插卡开机,注册到网络后(或者手机使用中由飞行模式进入待机模式),cprog.exe会删除数据库中带有SIM短信标志的记录,然后从SIM卡导入新的内容。由于项目需要,我们不让cprog.exe运行,那么完成短信导入的工作,只能交给自己的程序来处理。涉及内容:SIMAPI、CEMAPI、CEDB难点分析:我们在短信

jinhaijian的专栏 1789

【学习系列】SAP RAP 29:如何创建Application Jobs(下)

本文介绍了在SAP系统中通过API创建和使用Application Jobs的方法。主要内容包括:1) 创建RAP应用并通过Action调用API创建Jobs;2) 使用事件驱动方式异步更新Job状态;3) 通过URL跳转到标准日志页面;4) 使用Custom Entity获取Job日志;5) 演示遗留接口IF_APJ_DT_EXEC_OBJECT和IF_APJ_RT_EXEC_OBJECT的使用。文章提供了详细的代码示例,展示了如何通过CL_APJ_RT_API=>SCHEDULE_JOB调度作业,

DeveloperMrMeng的博客 384

数字游民产业小报告 · 2025

2025 年全球数字游民约(不同统计口径差异很大,低估法约 4,000 万,高估法 8,000 万),美国来源占比最高。:2025 Q1 约岗位允许一定程度远程;2024 年美国员工至少部分远程(全球 2023 年约 28%)。:到 2025 年,提供数字游民/远程工作签证(媒体口径 50–73 个不等;福布斯 66、Citizen Remote 50+、有机构清单称 73)。:以英国为例,期望未来一年全勤到岗、企业因强制返岗出现离职,说明“灵活/远程”仍是劳动力市场的筹码之一。

Anthony1453的博客 1469

CEMAPI实战攻略(三)——操作信箱中的短信息(上)

CEMAPI实战攻略(三)——操作信箱中的短信息(上)by 吴春雷QQ:819543772Email:wuchunlei@163.com三.操作信箱中的短信息1.       Windows mobile中短消息的组成用过的Windows Mobile平台设备的朋友在第一次发送的短信的时候或多或少都会有些困惑,尤其是使用Windows Mobile 2003以前版本的朋友,

不迎不送,来去自便,无茶无酒,谈笑随缘 3966

使用MCAL的Fee模块集成ETAS存储协议栈

由于ETAS Fee模块导致初始化时间较长,且集成占用的内存较大,所以最终考虑使用MCAL中的Fee模块来集成ETAS的Nvm模块,本文介绍具体的集成方法注意:本文所涉及的集成前提是原有的ETAS协议栈已正常使用使用IFX Fee需要手动配置Fee,可能有出错的风险,最好是利用脚本自动生成代码来实现。另外,需要注意IFX的Fee中block数据没有CRC校验,如果使用该Fee,建议Nvm中加CRC校验(ETAS Fee中block自带CRC,可以不需要Nvm Crc),防止数据被意外篡改导致的异常。

赞的博客 407

Cemapi实战攻略——提纲

写在前面的话:         最近正在搞基于Windows Moblie 5.0平台的手机应用程序的开发,其中用到了Cemapi库来开发短信相关应用的模块。由于以前一直在搞业务逻辑方面的开发,因此对cemapi了解的比较少。再开发的过程中,不可避免的遇到了一些问题,也到网上查阅了大量的资料,我惊讶的发现,对于这样一个已经相对成熟的技术,介绍的资料却是那么的稀少和不系统,除了两年前无聊客的《C

987

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

锂电池充电器电路设计 里面有电路

锂电池充电器电路设计 里面有电路 3.7V升压到5V电路设计。

CEMAPI实战攻略(一)

一.准备工作1.       开发环境和设备平台a)         下载和安装微软已经发布了Windows Mobile 6.0 SDK和中文版的仿真器已,WM6.0的SDK和仿真器分成了标准版和专业版两个版本,由于两个版本都可以支持cemapi.lib,因此我们可以选用其中任意一个版本作为我们的开发平台。本文选择了WM6.0 SDK Professional和WM6.0 中文版仿真

zxjzxj521的专栏 843

华为的C语言编程规范.pdf

华为技术有限公司内部技术规范。本规范制定了编写C语言程序的基本原则、规则和建议。从代码的清晰、简洁、可测试、安全、程序效率、可移植各个方面对C语言编程作出了具体指导。

Windows Mobile实战攻略(一)

<br />一.准备工作<br /> <br />1.       开发环境和设备平台<br /> <br />a)         下载和安装<br /> <br />微软已经发布了Windows Mobile 6.0 SDK和中文版的仿真器已,WM6.0的SDK和仿真器分成了标准版和专业版两个版本,由于两个版本都可以支持cemapi.lib,因此我们可以选用其中任意一个版本作为我们的开发平台。本文选择了WM6.0 SDK Professional和WM6.0 中文版仿真器,下载地址如下:<br /> <

vispeal的专栏 401

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

RAPI(转)

RAPI(转) 2011年06月09日   ● 引言   ● SMARTPHONE SDK API 库   ● 管理设备中的目录文件   ● 取系统信息   ● 远程操作电话和短信功能   Windows Mobile日益成熟,开发者队伍也越来越壮大。作为一个10年的计算机热爱者和程序员,我也经受不住新技术的诱惑,倒腾起Mobile这个玩具。Mobile和W...

vba150qf 186
上一篇: 【转】Windows Socket五种I/O模型——代码全攻略
下一篇: 【转】Windows Mobile 常见进程解析
code09
博客等级 码龄18年 31粉丝 56原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值