systemctl status firewalld #查看防火墙状态
systemctl start firewalld #开启防火墙
firewall-cmd --zone=public --add-port=80/tcp --permanent #增加防火墙放行端口
systemctl restart firewalld.service #重启防火墙
firewall-cmd --reload #重新载入配置
firewall-cmd --list-all #查看防火墙放行列表
firewall-cmd --remove-port=80/tcp --permanent #移除放行端口
systemctl stop firewalld #关闭防火墙
相关推荐
C语言实现俄罗斯方块
使用C语言完成俄罗斯方块。《俄罗斯方块》的基本规则是移动、旋转和摆放游戏自动输出的各种方块,使之排列成完整的一行或多行并且消除得分。由小方块组成的不同形状的板块陆续从屏幕上方落下来,玩家通过调整板块的位置和方向,使它们在屏幕底部拼出完整的一条或几条。这些完整的横条会随即消失,给新落下来的板块腾出空间,与此同时,玩家得到分数奖励。没有被消除掉的方块不断堆积起来,一旦堆到屏幕顶端,玩家便告输,游戏结束。顾名思义,俄罗斯方块自然是俄罗斯人发明的。
CentOS 防火墙设置
CentOS 防火墙 基础命令 功能 命令 备注 查看状态 firewall-cmd --state 开启 systemctl start firewalld.service 重启 systemctl restart firewalld.service 设置开启自启动 systemctl enable firewalld.service 查看自启设置是否成功...
TMS320F280039 CMD文件配置避坑指南:从.map文件看懂内存分配与溢出排查
本文详细解析了TMS320F280039芯片的CMD文件配置问题,通过.map文件分析内存分配与溢出排查。文章提供了实用的诊断技巧和解决方案,帮助开发者有效应对段溢出、地址重叠和栈堆冲突等常见问题,优化DSP程序的内存管理。
银河麒麟服务器操作系统 V10 SP1 防火墙(firewalld)指令
systemctl status firewalld(或者:systemctl status firewalld.service,或者:systemctl is-active firewalld)active(running):表示防火墙已经开启。4、关闭端口:firewall-cmd --permanent --remove-port=[端口]/tcp,success表示关闭成功。1、查询全部已开放的端口:firewall-cmd --list-all。
RuoYi(分离版) 使用代码生成器添加子模块(idea版)
文章目录准备一、使用代码生成器1.数据库2.导入表并生成代码二、导入代码文件1.新建一个模块2.导入zip代码文件3.模块环境配置添加菜单和访问地址总结 准备 前提要把系统启动起来,部分教程可以参考这边文章若依框架RuoYi前后端分离项目导入IDEA及运行启动 但是完全参考这篇文章还是不能把项目启动起来,因为这篇文章没有说明数据库。 我是用的是本地数据库,采用xampp+Navicat的组合来部署和访问数据库。打开Navicat,连接并创建数据库ry-vue并导入数据脚本ry_20191008.sql,q
手把手教你用Trae配置Python开发环境(含Claude 3.5代码生成实战)
本文详细介绍了如何使用字节跳动推出的Trae智能开发环境配置Python开发环境,并实战演示了Claude 3.5代码生成功能。从环境准备到项目初始化,再到AI辅助编码和调试优化,全面展示了Trae在提升开发效率方面的强大能力,特别适合Python开发者快速搭建项目和解决复杂问题。
Linux system firewalld火墙服务
火墙相关服务 1.firewalld DNAT:目标地址转换 SNAT:源地址转换 rpm -ql firewalld 查看firewalld的相关文件 vim /etc/firewalld/zones/ 每个生效的域的配置文件 /usr/lib/firewalld...
VTK学习(入门级教程,包括安装和使用)~持续更新中
说明:研究QT+VTK有段时间了,准备把学到的东西分享给大家,这篇博客以VS+QT+VTK为主进行展开学习的。
防火墙firewalld常用命令
防火墙firewalld常用命令
从 AccessControl.authorizationCheck 读懂 ABAP CDS 访问控制:默认策略、取舍边界与一线项目实战
摘要: 本文深入解析ABAP CDS视图中@AccessControl.authorizationCheck注解的核心功能与工程实践。该注解通过DCL角色实现行级数据过滤,提供三类能力:控制访问生效条件、约束语义一致性及管理特权访问。文章详述四种注解取值(#CHECK、#NOT_REQUIRED、#NOT_ALLOWED、#PRIVILEGED_ONLY)的适用场景与默认行为,并结合采购订单案例演示DCL与PFCG授权的落地步骤。同时指出访问控制的边界问题(如JOIN场景可能绕过过滤),并给出视图层级决策矩
Simulink开发项1000例实战专栏--实例52:基于Simulink开发一个超导磁储能控制系统,实现对SMES系统的精确控制和优化
需求分析超导磁储能系统(Superconducting Magnetic Energy Storage, SMES)是一种利用超导线圈储存和释放电能的高效储能技术。SMES系统具有响应速度快、能量密度高、循环寿命长等优点,广泛应用于电力系统的调峰填谷、频率调节、电压稳定以及紧急备用电源等领域。本项目将基于Simulink平台,开发一个完整的超导磁储能控制系统,实现对SMES系统的精确控制和优化。我们将详细讲解如何设计和实现该系统,并结合实际应用案例进行说明。
Centos 7 systemctl和防火墙firewalld命令
今天自己在Hyper-v下搭建三台Linux服务器集群,用于学习ELKstack(即大数据日志解决技术栈Elasticsearch,Logstash,Kibana的简称),下载的Linux版本为centos 7系列,装完才知道相比于centos 6做了很大的改动,很多命令都不一样了,例如:系统服务都用systemctl命令来开启service,它是CentOS7的服务管理中主要的工具,融合了之前service和chkconfig的功能,据说,systemctl与以往启动系统服务使用/etc/init.d脚本
[nlp] 自然语言理解基准 ATIS Snips
ATIS 4k 21 Intents(not include UNK) 120 SlotsSNIPS 13k 7 Intents(not include UNK) 72 SlotsATIS Benchmark (Intent Detection) | Papers With CodeSNIPS Benchmark (Intent Detection) | Papers With Code
Linux下防火墙的相关命令
二、启停防火墙的命令 三、开放或者限制端口号 1、开放端口 (1)开启22端口号 其中–permanent的作用是使设置永久生效,不加的话机器重启之后失效(2)重新载入一下防火墙设置,使设置生效 (3)可通过如下命令查看是否生效 (4)如下命令可查看当前系统打开的所有端口 2、限制端口 (1)限制22端口号 (2)重新载入一下防火墙设置,使设置生效 (3)可通过如下命令查看是否生效 (4)如下命令可查看当前系统打开的所有端口 三、开放或者限制IP地址 1、限制IP地址访问 (1)比如限制IP为192.16
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
OV9734 DATASHEET,完整规格书
OV9734完整规格书,包括电气参数,尺寸规格,寄存器配置表等
linux中防火墙启动及相关命令
Linux中防火墙启动及开放端口查看,删除,增加的命令 防火墙的设置 启动: systemctl start firewalld 关闭: systemctl stop firewalld 查看状态: systemctl status firewalld 开机禁用 : systemctl disable firewalld 开机启用 : systemctl enable firewalld 查看所有...
蓝牙模块HM-10手册
蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。
linux防火墙开放所有端口命令,linux centos7 防火墙及端口开放相关命令
一、防火墙相关命令1、查看防火墙状态: systemctl status firewalld.service注:active是绿的running表示防火墙开启2、关闭防火墙 :systemctl stop firewalld.service3、开机禁用防火墙自启命令 :systemctl disable firewalld.service4、启动防火墙 :systemctl start fire...
Camera2Demo
在Camera2 的基础上进行封装,使得Camera2一堆初始化逻辑与Activity分离,降低耦合度,完成预览拍照并保存的操作
Linux 防火墙相关命令
5)关闭防火墙端口firewall-cmd--zone=public--remove-port=9200/tcp--permanent。(4)开启防火墙端口firewall-cmd--zone=public--add-port=9200/tcp--permanent。(3)查看开放的端口firewall-cmd--list-ports。(1)查看防火墙状态firewall-cmd--state。(2)重新加载配置firewall-cmd--reload。–zone#作用域。......
Linux防火墙相关命令
Redhat、CentOS防火墙相关命名 1、防火墙状态查看 service iptables status 2、关闭防火墙 service iptables stop 3.禁用防火墙 chkconfig iptables off Oracle Linux关闭防火墙相关命令 关闭防火墙 [root@localhost ~]# systemctl
Linux下防火墙相关命令整理【转】
原文链接:https://blog.youkuaiyun.com/LEOZ_PTLS_PL/article/details/135611482。版权声明:本文为优快云博主「木马小Z」的原创文章,遵循CC 4.0 BY-SA版权协议,转载请附上原文出处链接及本声明。#不带--permanent重启就会失效,其他命令类似。这篇文章简单整理一下Linux系统中防火墙相关命令。#需要开启ip伪装才能设置端口转发。欢迎讨论,欢迎指正,欢迎转载。查看ip伪装是否开启。查看端口转发是否开启。重新加载防火墙的配置。
CentOS 7的服务管理,linux防火墙相关命令
一、防火墙相关命令 1、查看防火墙状态: systemctlstatusfirewalld.service 注:active是绿的running表示防火墙开启 2、关闭防火墙 :systemctl stop firewalld.service 3、开机禁用防火墙自启命令 :systemctl disable firewalld.service 4、启动防火墙 :systemctl start firewalld.service 5、防火墙随系统开启启动 : systemctl enable...
Linux系统部署从无到有---防火墙的相关命令
因为正式上线部署的Linux系统的防火墙肯定是打开的,就需要开启项目启动需要的端口即可
linux防火墙的相关命令,linux防火墙的相关命令
一、iptables防火墙(需要安装防火墙sudo apt-get install firewalld命令查看插件)1、基本操作# 查看防火墙状态service iptables status# 停止防火墙service iptables stop# 启动防火墙service iptables start# 重启防火墙service iptables restart# 永久关闭防火墙chkconf...
Linux 之 防火墙相关命令
1. firewalld的基本使用 // 启动 systemctl start firewalld // 关闭 systemctl stop firewalld // 查看状态 systemctl status firewalld // 开机禁用 systemctl disable firewalld 2. systemctl是CentOS7的服务管理工具中主要的工具,它融合之前service和chkconfig的功能于一体 // 启动一个服务 systemctl start firewall
linux防火墙的相关命令,linux 防火墙相关命令
1、系统命令systemctl start firewalld #启动systemctl status firewalld #查看运行状态systemctl stop firewalld #关闭systemctl disable firewalld.service #禁止开机启动firewall-cmd --state #查看默认防火墙状态firewall-cmd --reload #重启防火墙2...
linux 防火墙相关命令
最近在装mysql,有涉及到端口没开导致没法访问,有关linux关于防火墙的一些相关命令如下,记录一下,以防忘记。
7万+



被折叠的 条评论
为什么被折叠?



