ENSP的简单动态路由rip协议配置

最新推荐文章于 2025-10-26 10:40:04 发布

原创

最新推荐文章于 2025-10-26 10:40:04 发布 · 453 阅读

4 ·

CC 4.0 BY-SA版权

文章标签：

#开发语言 #网络

一：网络实验拓扑图绘制

二：详细动态路由配置过程

2.1 PC1配置

2.2 PC2配置

2.3 AR1配置

The device is running!
<Huawei>undo terminal monitor
Info: Current terminal monitor is off.
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]return
<R1>save
  The current configuration will be written to the device. 
  Are you sure to continue? (y/n)[n]:y
  It will take several minutes to save configuration file, please wait..........
  Configuration file had been saved successfully
  Note: The configuration file will take effect after being activated
<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]ip address 12.0.0.1 255.255.255.0
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]quit
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.10.254 255.255.255.0
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]quit
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]ip address 12.0.0.1 255.255.255.0
[R1-GigabitEthernet0/0/1]
[R1-GigabitEthernet0/0/1]quit
[R1]display ip interface brief
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in P