墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
400+累计阅读
420平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
随着“中国制造2025”的持续推进，中国制造行业已逐步向智能制造方向演进，越来越多的制造企业正在突破传统制造行业的管理思维，引入各类企业级系统对生产过程进行全生命周期管理，而物料信息则是企业的基石，在企业的生产过程管理中扮演着尤为重要的角色。物料的标准化能帮助企业更好的控制成本并强化精细化管理能力，提高供应链及生产的及时性、准确性，提高员工的工作效率。但企业往往在使用管理系统一段时间后，发现物料数据增长很快，每天都有不少的新物料编码产生，不到几年系统里就有几万甚至几十万的物料，这其中不乏存在“一物多码、一码多物”的情况。那什么是“一物多码”和“一码多物”呢？在您企业内部物料管理过程中，对一个物料的描述是否存在如下情况？如图1.1所示：
图1.1 某硒鼓产品存在的一物多码现象
Stata实战：用双向固定效应模型分析房价，从数据清洗到结果解读（附完整代码）
本文详细介绍了如何使用Stata实现房价数据的双向固定效应模型分析，从数据清洗到结果解读的全流程。通过具体代码示例，帮助读者掌握面板模型的应用技巧，特别适合经济学和金融学研究者进行房价影响因素分析。
从OFED到rdma-core：手把手带你搞定Linux下RDMA开发环境的选型与搭建
本文详细介绍了在Linux系统下搭建RDMA开发环境的完整流程，涵盖OFED与rdma-core的选型对比及分步安装指南。针对高性能计算和分布式存储需求，解析RDMA技术栈的核心组件，提供环境验证与性能测试方法，帮助开发者快速构建稳定高效的开发环境。特别适合需要优化网络性能的工程师参考。
从数据同化到水文模拟：CMADS如何重塑SWAT模型的中国实践
本文探讨了CMADS数据集与SWAT模型在中国复杂地形水文模拟中的融合实践。CMADS通过高分辨率气象数据同化技术，显著提升了SWAT模型在中国特殊地理环境下的模拟精度，特别是在数据稀缺区域。文章详细分析了CMADS的技术架构、应用案例及与传统数据的性能对比，为水文研究提供了新的技术支撑。
告别玄学：手把手配置EtherCAT从站PDI接口与同步采样（含Sync/Latch信号实战）
本文详细解析了EtherCAT从站PDI接口配置与同步采样技术，涵盖微处理器通信与直接驱动IO模式选择、同步采样四大触发模式（SOF、Latch_in、Sync0/Sync1）及输出触发实战。通过伺服驱动器实例，帮助工程师突破配置难点，实现高精度同步控制，提升工业自动化系统性能。
汇川EASY521 PLC实战指南：从硬件选型到程序架构与故障排查
可编程逻辑控制器（PLC）是工业自动化系统的核心大脑，其工作原理基于循环扫描机制，持续读取输入、执行用户程序并更新输出。这种确定性控制方式，使其在逻辑控制、顺序控制和运动控制中具有不可替代的技术价值，广泛应用于机械设备、生产线和过程控制等场景。对于汇川EASY521这类紧凑型高性能PLC，其核心优势在于集成了运动控制与丰富通讯接口，为中小型设备提供了高性价比的一站式解决方案。在实际应用中，工程师常需处理如“汇川sv660n”伺服驱动器的集成调试，或利用“hslcommunication”等开源库实现C#上位
FPGA领域四大顶级会议全景解读：从架构到应用的技术风向标
本文全景解读FPGA领域四大顶级会议（FPGA、FCCM、FPL、FPT），剖析其各自定位与技术风向。FPGA会议聚焦架构与工具创新，FCCM专攻硬件加速与定制计算，FPL覆盖从理论到应用的广泛领域，FPT则重点关注亚太市场与前沿应用。跟踪这些会议是把握FPGA技术演进、寻找创新灵感和应用方案的高效途径。
SAP：SAP的内存管理详解
SAP 的内存管理是一个复杂的多层机制，涉及应用服务器、数据库和操作系统的协同工作。通过合理配置和优化，可以显著提高 SAP 系统的性能和稳定性。
【AUTOSAR OS】调度表管理模块深度解析
本文深入解析AUTOSAR OS调度表的实现机制。调度表通过预定义到期点序列控制任务激活时序，支持周期性执行、多核协同和容错处理。核心数据结构包括调度表控制块（STCB）、配置结构和到期点动作。关键函数涵盖初始化、启动、到期点处理及链表管理，采用O(n)时间复杂度。以发动机控制为例展示配置与使用方式，并探讨显式同步、时间容错等高级特性。最后提出EP数量控制、链表优化等性能建议，为汽车ECU时间触发系统开发提供参考。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
精雕软件(JDpaint) 5.5 绿色版
精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版
霍尼韦尔SoftMaster使用说明
霍尼韦尔SoftMaster使用说明
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
275
扫一扫
