voicexml的录音

这里录音有两种途径(其实只有一种,可看成是两种而已)。一种是通过标准的<record/>进行录音,另一种是利用<filed>。

第一种方式比较标准,需要发出beep的声音之后才开始录音
第二种方式是filed有name属性,且有option选项(也可以是gramer),因此最后的值是option的值(这目前是猜测,还没有进行完整的测试)

下面的例子来源于:http://www.optimsys.cz/support/examples/example13.php


<?xml version="1.0" encoding="UTF-8"?>
<vxml version="2.0" xmlns="http://www.w3.org/2001/vxml">

<meta name="description" content="record example"/>
<meta name="author" content="OptimSys, s.r.o., Czech Republic (http://www.optimsys.cz)"/>
<meta name="copyright" content="free for any purpose"/>

<form id="start">
<catch event="error.unsupported.record">
<prompt>Recording is not supported in the current configuration, no
audio source specified.</prompt>
<exit/>
</catch>

<record name="recording" maxtime="10s" finalsilence="1s" beep="true">
<noinput> nothing was recoreded </noinput>
Recording starts after beep
<filled>You recorded: <audio expr="recording"/></filled>
</record>

<field name="answer">
<noinput> Hey, don't sleep! </noinput>
<nomatch> say 'yes' or 'no' </nomatch>

<prompt> Do you want to present details about the recording? </prompt>

<grammar root="main" tag-format="semantics/1.0-literals">
<rule id="main" scope="public">
<one-of>
<item><ruleref uri="#yes"/><tag>yes</tag></item>
<item><ruleref uri="#no"/><tag>no</tag></item>
</one-of>
</rule>
<rule id="yes">
<one-of>
<item>yes</item>
<item>yeah</item>
<item>yep</item>
<item>sure</item>
</one-of>
</rule>
<rule id="no">
<one-of>
<item>no</item>
<item>not</item>
<item>nope</item>
</one-of>
</rule>
</grammar>

<filled>
<if cond="answer!='yes'">
OK, good bye.
<exit/>
</if>
</filled>
</field>

<block>
<prompt>Recording size is <value expr="recording$.size"/> bytes.</prompt>
<prompt>Recording duration is <value expr="recording$.duration"/> milliseconds.</prompt>
<if cond="recording$.termchar !== undefined">
<prompt>Recording was interrupted by DTMF key <value expr="recording$.termchar"/>.</prompt>
<elseif cond="recording$.maxtime"/>
Recording was interrupted since it exceeded time limit.
<else/>
Recording was finished without any interruption.
</if>
</block>

</form>

</vxml>
一、综合实战—使用极轴追踪方式绘制信号灯 实战目标:利用对象捕捉追踪和极轴追踪功能创建信号灯图形 技术要点:结合两种追踪方式实现精确绘图,适用于工程制图中需要精确定位的场景 1. 切换至AutoCAD 操作步骤: 启动AutoCAD 2016软件 打开随书光盘中的素材文件 确认工作空间为"草图与注释"模式 2. 绘图设置 1)草图设置对话框 打开方式:通过"工具→绘图设置"菜单命令 功能定位:该对话框包含捕捉、追踪等核心绘图辅助功能设置 2)对象捕捉设置 关键配置: 启用对象捕捉(F3快捷键) 启用对象捕捉追踪(F11快捷键) 勾选端点、中心、圆心、象限点等常用捕捉模式 追踪原理:命令执行时悬停光标可显示追踪矢量,再次悬停可停止追踪 3)极轴追踪设置 参数设置: 启用极轴追踪功能 设置角度增量为45度 确认后退出对话框 3. 绘制信号灯 1)绘制圆形 执行命令:"绘图→圆→圆心、半径"命令 绘制过程: 使用对象捕捉追踪定位矩形中心作为圆心 输入半径值30并按Enter确认 通过象限点捕捉确保圆形位置准确 2)绘制直线 操作要点: 选择"绘图→直线"命令 捕捉矩形上边中点作为起点 捕捉圆的上象限点作为终点 按Enter结束当前直线命令 重复技巧: 按Enter可重复最近使用的直线命令 通过圆心捕捉和极轴追踪绘制放射状直线 最终形成完整的信号灯指示图案 3)完成绘制 验证要点: 检查所有直线是否准确连接圆心和象限点 确认极轴追踪的45度增量是否体现 保存绘图文件(快捷键Ctrl+S)
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值