weblogic 9.2 AIX安装全过程![ 字符] 含ESB安装和 AIX JDK升级

爱奇艺视频cmd5x解析算法的移植分析和实现<Nodejs>(2019-08) 爱奇艺视频cmd5x解析算法的移植分析和实现<Nodejs>(2019-08)。 什么是cmd5x算法 爱奇艺视频的解析算法cmd5x是dash视频接口的参数vf的生成算法,实际上这也是一个加了盐的md5算法。 说明 这不是完整的分析视频解析的过程,如果需要了解整一个大概过程可以参考2018版的爱奇艺视频解析分析过程。下面文章将直接以cmd5x代码为起点进行分析。 这是2019... 阅读详情

  作者:border88(姚) 2007-5-10 邮箱:border1982@163.com

硬件要求:

空间:不小于 1G

内存:不小于 1G 最好2 -4G 之间

CPU:不低于1.5GHz

 

1.         先确认安装的环境是不是AIX 5。3

[root@yaoxj ~]# oslevel

5.3.0 .0

2.         创建组 weblogic

groupadd weblogic   --增加组

cat /etc/group       --查看是否增加这个组

命令:

adduser -g weblogic -p weblogic weblogic    --增加用户

3.         从

4.         http://www-128.ibm.com/developerworks/java/jdk/aix/service.html

可以从网上下载,但最好用192.168.5.188下的/data/weblogic/sdk目录和/data/weblogic/license目录 

因为网上要下好几个包,且要使用smit installp安装

5.         使用 tar -xvf ibmjdk5.0.tar解开包

6.         配置weblogic 的JAVA 环境变

在 .profile 文件中增加如下几行

PATH=$PATH:/data/weblogic/sdk/bin:/data/weblogic/sdk/jre/bin  --注意和自己的JDK目录相同

export PATH

JAVA_HOME=/data/weblogic/sdk/     --注意和自己的JDK目录相同

export JAVA_HOME

              保存退出

7.         退出使用weblogic 用户登陆

执行java –version

java version " 1.5.0 "

Java(TM) 2 Runtime Environment, Standard Edition (build pap64dev-20070201 (SR4))

IBM J9 VM (build 2.3, J2RE 1.5.0 IBM J9 2.3 AIX ppc64-64 j9vmap6423-20070201 (JIT enabled)

J9VM - 20070131_11312_BHdSMr

JIT  - 20070109_1805ifx1_r8

GC   - 200701_09)

JCL  - 20070126

放入BEA-ESB AIX光盘 (或将相应安装文件传到AIX上)  使用MOUNT命令挂上光驱

进入光盘相应目录 如:/media/cdrom

8.         执行

java -jar alsb250_wls920_generic.jar -mode=console -Xmx= 1024m -Djava.io.tmpdir=/data/weblogic/tmp –log=/data/weblogic/log64.log

出现下面字符:

Extracting 0%....................................................................................................100%

################################################################

之后,出现下面字符:输入Next

################################################################

 

<------------------------ BEA Installer - BEA Products ----------------------->

 

Welcome:

--------

 

This installer will guide you through the installation of BEA Products. Type

"Next" or enter to proceed to the next prompt.  If you want to change data

entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".

 

 

 

 

Enter [Exit][Next]>Next

################################################################

之后,出现下面字符:输入1

################################################################

<------------------------ BEA Installer - BEA Products ----------------------->

 

BEA Systems License Agreement:

------------------------------

 

BEA SYSTEMS, INC. SOFTWARE LICENSE AGREEMENT

 

USE OF SOFTWARE ORDERED FROM BEA SYSTEMS, INC. ("BEA") IS PROVIDED ONLY UNDER

LICENSE FROM BEA. PLEASE READ THE FOLLOWING LICENSE CAREFULLY AND INDICATE YOUR ACCEPTANCE BY CLICKING THE ACCEPTANCE BOX. CERTAIN CAPITALIZED TERMS ARE

DEFINED IN SECTION 11.

       

1.  LICENSE TERMS

 

a.  WebLogic SDK Use.  The terms of this Section 1(a) are applicable to you if

you have registered as a WebLogic SDK customer. Subject to the terms of this

Agreement, BEA grants to you a non-exclusive, non-transferable, royalty-free

license to use WebLogic SDK solely for Development Use and Scale-Limited

Personal Use for the number of users and/or developers and the number of CPU's, Servers and/or at the Sites, as specified at the time of registration. Third

party software products or modules supplied by BEA, if any, may be used solely

with the Software. All rights not specifically granted to you herein are

retained by BEA.

 

b. WebLogic SDK Pro Use.  The terms of this Section 1(b) are applicable to you

if you have registered as a WebLogic SDK Pro customer. Subject to the terms of

this Agreement, BEA grants to you a non-exclusive, non-transferable,

 

Use above value or select another option:

    1 - Yes, I agree with the terms of the license

    2 - No, I do not agree with the terms of the license

 

 

 

 

Enter option number to select OR [Down][Exit][Previous]>1

################################################################

之后,出现下面字符:输入Next    [输入安装路径,这里使用默认的所以输入Next]

################################################################

 

<------------------------ BEA Installer - BEA Products ----------------------->

 

Choose BEA Home Directory:

--------------------------

 

    " BEA Home " = [Enter new value or use default "/data/weblogic/bea"]

 

################################################################

之后,出现下面字符:输入1    [完全安装  Complete]

################################################################

 

<------------------------ BEA Installer - BEA Products ----------------------->

 

Choose Install Type:

--------------------

 

Select the type of installation you wish to perform.

 

 ->1|Complete

    |  Install the following software components and examples:

    | - WebLogic Server

    | - Workshop for WebLogic Platform

    | - AquaLogic Service Bus

 

   2|Custom

    |  Choose software components to install and perform optional configuration.

Enter index number to select OR [Exit][Previous][Next]> 1

 

################################################################

之后,出现下面字符:输入1    [完全默认的产品]

################################################################

 

<------------------------ BEA Installer - BEA Products ----------------------->

 

Choose Product Installation Directories:

----------------------------------------

 

BEA Home Directory: [/data/weblogic/bea]

 

Product Installation Directories:

 

 

   1|Default Product Home: [/data/weblogic/bea/weblogic92]

   2|Workshop for WebLogic Platform: [/data/weblogic/bea/workshop92]

 

 

 

 

Enter index number to select OR [Exit][Previous][Next]> 1

 

################################################################

之后,出现下面字符:输入Next    [完全默认的产品路径]

################################################################

<------------------------ BEA Installer - BEA Products ----------------------->

 

Choose Product Installation Directories:

----------------------------------------

 

    "Default Product Home" = [Enter new value or use default

"/data/weblogic/bea/weblogic92"]

 

 

 

 

Enter new Default Product Home OR [Exit][Previous][Next]>Next

 

 

################################################################

开始安装,如下图

################################################################

 

 

 

 

 

 

<------------------------ BEA Installer - BEA Products ----------------------->

 

Installing files..

 

0%          25%          50%          75%          100%

[------------|------------|------------|------------]

[**********************************]

 

 

Performing String Substitutions...

 

 

 

Creating Domains...

 

 

 

################################################################

执行:/data/weblogic/bea/weblogic92/common/bin/config.sh

 [和你的weblogic安装路径一样]

################################################################

Unable to instantiate GUI, defaulting to console mode.

 

 

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Welcome:

--------

 

Choose between creating and extending a domain. Based on your selection,

the Configuration Wizard guides you through the steps to generate a new or

extend an existing domain.

 

 ->1|Create a new WebLogic domain

    |    Create a WebLogic domain in your projects directory. 

 

   2|Extend an existing WebLogic domain

    |    Extend an existing WebLogic domain.  Use this option to add

    |applications and services, or to override existing database access (JDBC)

    |and messaging (JMS) settings. You can also incorporate additional

    |functionality in your domain, for example, by including AquaLogic Service

    |Bus.

 

 

 

################################################################

之后,出现下面字符:输入1

################################################################

 

Enter index number to select OR [Exit][Next]> 1

 

 

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Select Domain Source:

---------------------

 

Select the source from which the domain will be created. You can create the

domain by selecting from the required components or by selecting from a

list of existing domain templates.

 

 ->1|Choose Weblogic Platform components

    |    You can choose the Weblogic component(s) that you want supported in

    |your domain.

 

   2|Choose custom template

    |    Choose this option if you want to use an existing  template. This

    |could be a custom created template using the Template Builder.

 

Enter index number to select OR [Exit][Next]> 1

################################################################

之后,出现下面字符:输入1

################################################################

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Select Domain Source:

---------------------

 

Select the source from which the domain will be created. You can create the

domain by selecting from the required components or by selecting from a

list of existing domain templates.

 

 ->1|Choose Weblogic Platform components

    |    You can choose the Weblogic component(s) that you want supported in

    |your domain.

 

   2|Choose custom template

    |    Choose this option if you want to use an existing  template. This

    |could be a custom created template using the Template Builder.

 

 

 

 

 

Enter index number to select OR [Exit][Previous][Next]> 1

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Application Template Selection:

-------------------------------

 

 

    Available Templates

    |_____WebLogic Server (Required)x

    |_____Workshop for WebLogic Platform [2]

    |_____AquaLogic Service Bus [3]

 

 

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>3

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Application Template Selection:

-------------------------------

 

 

    Available Templates

    |_____WebLogic Server (Required)x

    |_____Workshop for WebLogic Platform [2]

    |_____AquaLogic Service Bus [x]

 

 

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>Next

 

 

################################################################

之后,出现下面字符:输入2

################################################################

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Administrator Username and Password:

----------------------------------------------

 

Create a user to be assigned to the Administrator role. This user is the

default administrator used to start development mode servers.

 

    |          Name           |                  Value                  |

   _|_________________________|_________________________________________|

   1|       *User name:       |                weblogic                 |

   2|     *User password:     |                                         |

   3| *Confirm user password: |                                         |

   4|      Description:       | This user is the default administrator. |

 

Use above value or select another option:

    1 - Modify "User name"

    2 - Modify "User password"

    3 - Modify "Confirm user password"

    4 - Modify "Description"

 

 

 

 

Enter option number to select OR [Exit][Previous][Next]> 2

 

 

################################################################

之后,出现下面字符:输入用户的密码   weblogic

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Administrator Username and Password:

----------------------------------------------

 

Create a user to be assigned to the Administrator role. This user is the

default administrator used to start development mode servers.

 

    "*User password:" = []

 

 

 

 

Enter new *User password: OR [Exit][Reset][Accept]> weblogic

 

 

################################################################

之后,出现下面字符:输入3    [确认用户密码]

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Administrator Username and Password:

----------------------------------------------

 

Create a user to be assigned to the Administrator role. This user is the

default administrator used to start development mode servers.

 

    |          Name           |                  Value                  |

   _|_________________________|_________________________________________|

   1|       *User name:       |                weblogic                 |

   2|     *User password:     |                ********                 |

   3| *Confirm user password: |                                         |

   4|      Description:       | This user is the default administrator. |

 

Use above value or select another option:

    1 - Modify "User name"

    2 - Modify "User password"

    3 - Modify "Confirm user password"

    4 - Modify "Description"

    5 - Discard Changes

 

 

 

 

Enter option number to select OR [Exit][Previous][Next]> 3

 

 

################################################################

之后,出现下面字符:输入用户的确认密码   weblogic

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Administrator Username and Password:

----------------------------------------------

 

Create a user to be assigned to the Administrator role. This user is the

default administrator used to start development mode servers.

 

    "*Confirm user password:" = []

 

 

 

 

Enter new *Confirm user password: OR [Exit][Reset][Accept]> weblogic

 

 

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Administrator Username and Password:

----------------------------------------------

 

Create a user to be assigned to the Administrator role. This user is the

default administrator used to start development mode servers.

 

    |          Name           |                  Value                  |

   _|_________________________|_________________________________________|

   1|       *User name:       |                weblogic                 |

   2|     *User password:     |                ********                 |

   3| *Confirm user password: |                ********                 |

   4|      Description:       | This user is the default administrator. |

 

Use above value or select another option:

    1 - Modify "User name"

    2 - Modify "User password"

    3 - Modify "Confirm user password"

    4 - Modify "Description"

    5 - Discard Changes

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

Enter option number to select OR [Exit][Previous][Next]> Next

 

 

################################################################

之后,出现下面字符:输入1    [开发模式,如果是现场则输入2  产品模式

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Domain Mode Configuration:

--------------------------

 

Enable Development or Production Mode for this domain.

 

 ->1|Development Mode

 

   2|Production Mode

 

 

 

 

Enter index number to select OR [Exit][Previous][Next]> 1

 

 

################################################################

之后,出现下面字符:输入1   [选择JDK]

################################################################

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Java SDK Selection:

-------------------

 

 ->1|Unknown SDK 6.0 @ /data/weblogic/sdk

   2|Other Java SDK

 

 

 

 

Enter index number to select OR [Exit][Previous][Next]>1

 

 

################################################################

之后,出现下面字符:输入Yes

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Choose Configuration Option:

----------------------------

 

    *Do you want to modify any of the preconfigured settings or defaults in

    *your template?

    *

    *To keep the default or template settings, and proceed directly to name and     *create your domain, leave No selected.

 

   1|Yes

 

 ->2|No

 

 

 

 

 

Enter index number to select OR [Exit][Previous][Next]> Yes

 

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Choose Configuration Option:

----------------------------

 

    *Do you want to modify any of the preconfigured settings or defaults in

    *your template?

    *

    *To keep the default or template settings, and proceed directly to name and     *create your domain, leave No selected.

 

   1|Yes

 

 ->2|No

 

 

 

    ** Invalid input, only integer selection or page movement command are

    ** accepted: Yes

 

 

 

 

Enter index number to select OR [Exit][Previous][Next]>1

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure the Administration Server:

------------------------------------

 

Enter adminstration server configurations. Each WebLogic Server domain must

have one Administration Server. The Administration Server hosts the

Administration Console which is used to perform administrative tasks.

 

    |       Name       |        Value        |

   _|__________________|_____________________|

   1|      *Name:      |     AdminServer     |

   2| Listen address:  | All Local Addresses |

   3|   Listen port:   |        7001         |

   4| SSL listen port: |         N/A         |

   5|   SSL enabled:   |        false        |

 

Use above value or select another option:

    1 - Modify "Name"

    2 - Modify "Listen address"

    3 - Modify "Listen port"

    4 - Modify "SSL enabled"

 

 

 

 

Enter option number to select OR [Exit][Previous][Next]> Next

 

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Managed Servers:

--------------------------

 

Add or delete configuration information for Managed Servers. A typical

production environment has one or more Managed Servers. Each Managed Server

is an instance of WebLogic Server used to host enterprise applications.

 

    | Name* | Listen address | Listen port | SSL listen port | SSL enabled |

   _|_______|________________|_____________|_________________|_____________|

 

 

 

 

Enter name for a new  OR [Exit][Previous][Next]> Next

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Clusters:

-------------------

 

Add or delete configuration information for clusters. A cluster contains

multiple WebLogic Server instances that run simultaneously and work

together to provide increased scalability and reliability. A cluster

appears to be a single WebLogic Server instance to clients.

 

    | Name* | Multicast address | Multicast port | Cluster address |

   _|_______|___________________|________________|_________________|

 

 

 

 

Enter name for a new Cluster OR [Exit][Previous][Next]>Next

 

 

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Unix Machines:

------------------------

 

Add or delete configuration information for machines. A machine is the

logical representation of the system that hosts one or more WebLogic Server

instances. The Administration Server and Node Manager application use the

machine definition to start remote servers.

 

    | Name |

   _|______|

 

Enter name for a new Cluster OR [Exit][Previous][Next]>Next

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Clusters:

-------------------

 

Add or delete configuration information for clusters. A cluster contains

multiple WebLogic Server instances that run simultaneously and work

together to provide increased scalability and reliability. A cluster

appears to be a single WebLogic Server instance to clients.

 

    | Name* | Multicast address | Multicast port | Cluster address |

   _|_______|___________________|________________|_________________|

 

 

 

 

Enter name for a new Cluster OR [Exit][Previous][Next]> Next

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Configure Machines:

-------------------

 

Add or delete configuration information for machines. A machine is the

logical representation of the system that hosts one or more WebLogic Server

instances. The Administration Server and Node Manager application use the

machine definition to start remote servers.

 

    | Name* | Node manager listen address | Node manager listen port |

   _|_______|_____________________________|__________________________|

 

 

 

 

Enter name for a new Machine OR [Exit][Previous][Next]> Next

 

 

 

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Select the target domain directory for this domain:

---------------------------------------------------

 

    "Target Location" = [Enter new value or use default

"/data/weblogic/bea/user_projects/domains"]

 

 

 

 

Enter new Target Location OR [Exit][Previous][Next]> Next

 

 

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Edit Domain Information:

------------------------

 

    |  Name  |    Value    |

   _|________|_____________|

   1| *Name: | base_domain |

 

 

 

 

Enter value for "Name" OR [Exit][Previous][Next]> ^C$    

 

################################################################

之后,出现下面字符:输入Next

################################################################

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Edit Domain Information:

------------------------

 

    |  Name  |    Value    |

   _|________|_____________|

   1| *Name: | base_domain |

 

 

 

 

Enter value for "Name" OR [Exit][Previous][Next]>

 

 

 

 

<--------------------- BEA WebLogic Configuration Wizard --------------------->

 

Creating Domain...

 

0%          25%          50%          75%          100%

[------------|------------|------------|------------]

[***************************************************]

 

 

**** Domain Created Successfully! **** 

 

################################################################

/data/weblogic/bea/user_projects/domains/base_domain/startWebLogic.sh  启动服务器

################################################################

 

使用IE或Mozilla 游览weblogic

Server控制台:

http://192.168.5.188:7001/console

ESB控制台

http://192.168.5.188:7001/sbconsole

                                                                 作者:border88(姚) 2007-5-10

 

 

 

                邮箱:border1982@163.com

Linux环境部署war包流程及tomcat配置 现在的部署当然都是写好自动化脚本在Linux下一跑就完事了,但是一方面每个项目的部署环境不一样,即使部署在同一个服务器上tomcat也不一样,所以自动化脚本也是千变万化;另一方面再牛逼的自动化脚本也是在基本的流程基础上编写的,所以这里不讨论自动化脚本咋写,而是认识一下Linux环境部署war包流程,抓住最基本的流程。 一、tomcat配置 发布... 阅读详情

相关推荐

weblogic9.2 FOR AIX 5L安装手册.doc

weblogic9.2 FOR AIX 5L安装手册,weblogic在aix下的安装和测试。

weblogic 9.2 LINUX安装全过程![ 图形] 含ESB安装

     作者:border88(姚) 2007-5-10      邮箱:border1982@163.com1.         先确认安装的环境是不是LINUX AS 4    [root@yaoxj ~]# cat /etc/issueRed Hat Enterprise Linux AS release 4 (Nahant Update 1)Kernel /r on

border88的专栏 1920

weblogic 9.2 中文文档

weblogic 9.2的中文CHM帮助,网上收集后进行了打包,对10g及后续版本都有借鉴意义。值得推荐!

Weblogic9.2在aix上安装需注意的问题

1、   需要建weblogic用户(目录改为/weblogic)和bea组   2、   需要安装JDK1.5(有32-bit和64-bit,并要更改/etc/environment设置,)   3、   WebLogic Server发送的数据包最大有32k,因此buffer小于32k可能会导致IO 错误: #no –p –o udp_sendspace=32768   4、

huyangg的专栏 819

AIX 机上安装weblogic

NULL 博文链接:https://caihorse.iteye.com/blog/726850

YOLOv8实战火焰和烟雾检测 (视频教程)

本课程将手把手地教大家使用YOLOv8结合可变形卷积(deformable convolution)训练火焰和烟雾数据集,完成一个多目标检测实战项目,可实时检测图像、视频、摄像头和流媒体(http/rtsp)中火焰和烟雾,并提供可视化演示界面 。

bai666ai的博客 1919

红旗桌面4.0正式版最新使用方法和问题解答100例

原作:dsj兄来源URL:http://www.linuxsir.com/bbs/showthr...?threadid=53275以下为原文(发表自linuxsir.com):大部分转自红旗论坛和参考我原来b版的帖子:1、桌面版4.0正式版在控制面板里的启动管理中创建启动盘不成功。请用字符方式试。控制面板中创建启动盘出错,是有问题,我们会尽快解决。这是正式版的一个BUG,把光盘放进去做重新引导,

好好学习,天天向上! 5845

GD32F470 DSP库移植避坑指南:从CMSIS版本冲突到AC6工程配置

本文详细解析了在GD32F470平台上移植CMSIS-DSP库的完整流程与关键避坑点。针对CMSIS版本冲突、AC6编译器下的浮点ABI配置、DSP库源文件添加等核心难题,提供了经过验证的解决方案,帮助开发者高效完成移植,确保硬件FPU正常工作并优化性能。

data3的博客 532

Linux 安装WebLogic9.2 MP2(图文详解 教程下载)

1      安装WebLogic9.2 MP2 1.1 准备安装介质 准备安装介质server922_zh_CN_linx32.bin (大概807M) 1.2 创建用户组和用户 创建用户组weblogic,创建用户weblogic,并使用passwd为其设置密码 切换到weblogic用户,在weblogic主目录下创建inst_package,并使用ftp或smb方式把安装介质

he_jian1的专栏 2298

Jetson AGX Orin到手必看:DP线选错黑屏、SSD不识别?这篇避坑指南帮你一次搞定

本文详细介绍了Jetson AGX Orin开发套件的硬件避坑指南,涵盖开箱检查、DP线选择、SSD兼容性等关键问题。通过实测数据和实用技巧,帮助开发者避免黑屏、存储不识别等常见问题,提升开发效率。特别推荐符合VESA认证的DP 1.4a线缆和兼容性优秀的SSD型号,确保设备稳定运行。

weixin_33696822的博客 435

ollama接入图像识别大模型

ollama接入图像识别大模型

qq_36437991的博客 2079

实验:centos 7.3二进制安装mariadb10.2.8及脚本安装

(1)查看系统中是否存在mysql  [root@centos7 ~]# rpm -qa mariadb* [root@centos7 ~]# 注意:存在则删除 yum remove mysql (2)准备用户 getent passwd mysql useradd –d /app/mysqldb -r -m -s /sbin/nologin mysql (

lixueping88的博客 676

【前端基础篇】HTML5 + CSS3 入门知识

,HTML5和CSS3核心知识

前端知识分享喵 2982

手把手教你从头开始搭建友善之臂ARM-tiny4412开发环境(史上最详细!!)

创建一个ARM目录 mkdir /disk/A9 -p 接下来你需要准备以下的东西 1、arm-linux-gcc-4.5.1 交叉编译器 2、linux-3.5-tiny4412 内核 3、rootfs_qtopia_qt4-20140124.tar.gz QT文件系统 (做好的) 4、busybox-1.22.1.ta...

weixin_33843409的博客 1389

C 语言多文件编程 : 大型程序的组织与管理

本文介绍了C语言多文件编程的核心概念与实践方法。主要内容包括:1. 多文件编程的必要性:解决单文件编程在大型项目中的维护和协作问题;2. 文件组织方式:头文件(.h)负责声明接口,源文件(.c)实现具体功能;3. 编译链接过程:分阶段编译和链接多个源文件;4. 头文件设计原则:包含接口声明、使用保护机制、保持自包含性;5. 模块化实践:通过示例展示学生信息管理系统的模块划分;6. 构建工具:介绍Makefile的编写和使用方法。文章还提供了创建静态库和动态库的指导,并强调了模块化设计、信息隐藏等软件工程原则

2503_91057718的博客 1948

ICP-10111气压传感器原理图设计,已量产(压力传感器)

在最近的室内导航定位项目中,我们需要一款能捕捉厘米级垂直高度变化的气压传感器 —— 毕竟室内环境里,哪怕是单个台阶的高度差都得精准识别。对比了几款器件后,最终选定了 ICP-10111:它 ±1Pa 的压差精度刚好能把高度差分辨到 8.5cm,0.4Pa 的低压力噪声能让数据输出足够稳定,再加上 0.5Pa/℃的低温漂特性,长期工作的可靠性也能满足需求。下面聊聊这套适配 ICP-10111 的硬件电路设计细节。

不脱发的程序猿 335

linux下的tar压缩及解压缩命令详解

tar工具  tar [OPTION]... (1) 创建归档       tar -cpvf /PATH/TO/SOMEFILE.tar FILE...       解释:tar -c(c表示创建打包的意思)pvf 创建一个.tar后缀的打包文件;后面加多个文件,或者是文件夹。       p 选项 ;显示打包过程, 语法:tar cvf etc.tar /app/etc (2...

weixin_42741132的博客 11万+

TIA博途选型工具Selection Tool的基本使用方法介绍

TIA博途选型工具Selection Tool的基本使用方法介绍

Robot_PLC_HMI_Automation 4216

搭建ELK日志分析系统

ELK Stack 是Elasticsearch、Logstash、Kiban三个开源软件的组合。在实时数据检索和分析场合,三者通常是配合共用,而且又都先后归于 Elastic.co 公司名下,故有此简称。 ELK Stack成为机器数据分析,或者说实时日志处理领域,开源界的第一选择。和传统的日志处理方案相比,ELK Stack 具有如下几个优点: • 处理方式灵活。Elasticsearch 是...

菲宇运维 9万+

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过,这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后,重新检测通过。

Weblogic 9.2产品直接下载!

WebLogic Server 9.2直接下载:http://download2.bea.com/pub/platform/92/server920_win32.exehttp://download2.bea.com/pub/platform/92/server920_linux32.binhttp://download2.bea.com/pub/platform/92/server920_hpu...

weixin_30793643的博客 419

android 蓝牙通讯demo

android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。

Weblogic9.2.2与AIX系统不兼容问题

当我们在AIX 5300-05操作系统上部署我们的JMS服务时会出现的错误,然而一样的部署步骤在LINUX系统上却没有出现问题,这是因为Weblogic9.2.2与AIX系统不兼容所造成的。解决步骤:1、将jar包(CR322044_920mp2.jar)上传到服务器上,记住存放路径。2、打开/bea922/user_projects/domains/mydomain/bin目录下的s

javaboy915的专栏 568

TMS_WebGMaps_1.9.8.0_Full_Source

TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder

tomcat 部署

【TOMCAT部署】: 【步骤一】: 上传安装包 apache-tomcat-8.5.15.tar.gz 到 /home/jsManager并修改解压; tar -xvf apache-tomcat-8.5.15.tar.gz 修改catalina.sh不输出out日志,大概第200行 if [ -z "$CATALINA_OUT" ] ; then #CATALINA_OUT="$CATALINA_BASE"/logs/catalina.out CATALINA_OUT=/dev/nul.

zhou_bo88的博客 304

Linux 基础知识选择/填空

选择题 1. 返回调用进程的进程标识号的系统函数是________。 A. getpid B. getpgrp C. getppid D. setpid ##A 2. 关于文件系统的安装和卸载,下面描述正确的是________。 A. 如果光盘未经卸载,光驱是打不开的 B. 安装文件系统的安装点只能是/mn...

weixin_30929011的博客 1366

批量执行sql脚本(dos,sqlcmd),实现数据库升级,本地必须有数据库

using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Text; using System.Windows.Forms; using System.Data.SqlClient; using

gmdjajy的专栏 3万+

【linux】【jenkins】自动化运维三 整合gitlab、docker发布vue项目

由于工作需要,这里我先创建一个vue的工程。 1.首先安装好gitlab相关插件:GitLab、GitLabHook、NodeJS 插件安装参考:https://www.cnblogs.com/jxd283465/p/11542680.html 2.jenkins服务器安装git 和 nodejs git安装: yum -y install git nodejs安装...

2707
上一篇: weblogic 9.2 LINUX安装全过程![ 图形] 含ESB安装
下一篇: oracle 数据库中的锁机制研究
border88
博客等级 码龄24年 3粉丝 14原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值