POJ 1904 King's Quest

国王求婚问题解析
本文介绍了一个经典的图论问题——国王求婚问题,通过构建特定的有向图并利用Tarjan算法求解强连通分量来找出每位王子可以结婚的所有可能的女孩,确保在任何一种情况下都能实现完美配对。

 

King's Quest
Time Limit: 15000MS Memory Limit: 65536K
Total Submissions: 2957 Accepted: 993
Case Time Limit: 2000MS

Description

Once upon a time there lived a king and he had N sons. And there were N beautiful girls in the kingdom and the king knew about each of his sons which of those girls he did like. The sons of the king were young and light-headed, so it was possible for one son to like several girls.

So the king asked his wizard to find for each of his sons the girl he liked, so that he could marry her. And the king's wizard did it -- for each son the girl that he could marry was chosen, so that he liked this girl and, of course, each beautiful girl had to marry only one of the king's sons.

However, the king looked at the list and said: "I like the list you have made, but I am not completely satisfied. For each son I would like to know all the girls that he can marry. Of course, after he marries any of those girls, for each other son you must still be able to choose the girl he likes to marry."

The problem the king wanted the wizard to solve had become too hard for him. You must save wizard's head by solving this problem.

Input

The first line of the input contains N -- the number of king's sons (1 <= N <= 2000). Next N lines for each of king's sons contain the list of the girls he likes: first Ki -- the number of those girls, and then Ki different integer numbers, ranging from 1 to N denoting the girls. The sum of all Ki does not exceed 200000.

The last line of the case contains the original list the wizard had made -- N different integer numbers: for each son the number of the girl he would marry in compliance with this list. It is guaranteed that the list is correct, that is, each son likes the girl he must marry according to this list.

Output

Output N lines.For each king's son first print Li -- the number of different girls he likes and can marry so that after his marriage it is possible to marry each of the other king's sons. After that print Li different integer numbers denoting those girls, in ascending order.

Sample Input

4
2 1 2
2 1 2
2 2 3
2 3 4
1 2 3 4

Sample Output

2 1 2
2 1 2
1 3
1 4

Hint

This problem has huge input and output data,use scanf() and printf() instead of cin and cout to read data to avoid time limit exceed.

Source

 

 

 

带开环升压转换器和逆变器的太阳能光伏系统 太阳能光伏系统驱动开环升压转换器和SPWM逆变器提供波形稳定、设计简单的交流电的模型 Simulink模型展示了一个完整的基于太阳能光伏的直流到交流电力转换系统,该系统由简单、透明、易于理解的模块构建而成。该系统从配置为提供真实直流输出电压的光伏阵列开始,然后由开环DC-DC升压转换器进行处理。升压转换器将光伏电压提高到适合为单相全桥逆变器供电的稳定直流链路电平。 逆变器使用正弦PWM(SPWM)开关来产生干净的交流输出波形,使该模型成为研究直流-交流转换基本操作的理想选择。该设计避免了闭环和MPPT的复杂性,使用户能够专注于光伏接口、升压转换和逆变器开关的核心概念。 此模型包含的主要功能: •太阳能光伏阵列在标准条件下产生~200V电压 •具有固定占空比操作的开环升压转换器 •直流链路电容器,用于平滑和稳定转换器输出 •单相全桥SPWM逆变器 •交流负载,用于观察实际输出行为 •显示光伏电压、升压输出、直流链路电压、逆变器交流波形和负载电流的组织良好的范围 •完全可编辑的结构,适合分析、实验和扩展 该模型旨在为太阳能直流-交流转换提供一个干净高效的仿真框架。布局简单明了,允许用户快速了解信号流,检查各个阶段,并根据需要修改参数。 系统架构有意保持模块化,因此可以轻松扩展,例如通过添加MPPT、动态负载行为、闭环升压控制或并网逆变器概念。该模型为进一步开发或整合到更大的可再生能源模拟中奠定了坚实的基础。
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值