ubuntu16下安装mongodb 3.6

１．安装MongoDB社区版

# 1. 导入MongoDB public GPG Key
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 2930ADAE8CAF5059EE73BB4B58712A2291FA4AD5

# 2. 添加软件源 
echo "deb [ arch=amd64,arm64 ] https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-3.6.list

# 3. 更新本地软件包
sudo apt-get update

# 4. 安装MongoDB
sudo apt-get install -y mongodb-org

根据教程，本地Ubuntu 16.04系统安装的是mongodb3.6，安装的时候提示如下，会安装下面相关几个软件包：
Get:1 https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6/multiverse amd64 mongodb-org-shell amd64 3.6.0 [8,477 kB]
Get:2 https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6/multiverse amd64 mongodb-org-server amd64 3.6.0 [14.9 MB]                                                                                    
Get:3 https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6/multiverse amd64 mongodb-org-mongos amd64 3.6.0 [8,468 kB]                                                                                   
Get:4 https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6/multiverse amd64 mongodb-org-tools amd64 3.6.0 [34.9 MB]                                                                                     
Get:5 https://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.6/multiverse amd64 mongodb-org amd64 3.6.0 [3,524 B]          

 

２．MongoDB的运行

查看mongod的配置文件，可以看到它默认的数据存储路径、log文件路径、IP接口等并根据需要修改：

$ sudo vim /etc/mongod.conf 
# mongod.conf

# for documentation of all options, see:
#   http://docs.mongodb.org/manual/reference/configuration-options/

# Where and how to store data.
storage:
  dbPath: /var/lib/mongodb
  journal:
    enabled: true
#  engine:
#  mmapv1:
#  wiredTiger:

# where to write logging data.
systemLog:
  destination: file
  logAppend: true
  path: /var/log/mongodb/mongod.log

# network interfaces
net:
  port: 27017
  bindIp: 127.0.0.1


# how the process runs
processManagement:
  timeZoneInfo: /usr/share/zoneinfo

#security:

#operationProfiling:

#replication:

#sharding:

## Enterprise-Only Options:

#auditLog:

#snmp:

 

# 1. 启动MongoDB
sudo service mongod start
# 2. 验证MongoDB是否启动成功（在/var/log/mongodb/mongod.log文件中看到下面这一行就表示启动成功）
[initandlisten] waiting for connections on port 27017
# 3. 停止MongoDB进程
sudo service mongod stop
# 4. 重启MongoDB
sudo service mongod restart
# 5. 查看MongoDB运行状态
sudo service mongod status

 

３．MongoDB的使用

# 查看版本
$ mongod --version
db version v3.6.0
git version: a57d8e71e6998a2d0afde7edc11bd23e5661c915
OpenSSL version: OpenSSL 1.0.2g  1 Mar 2016
allocator: tcmalloc
modules: none
build environment:
    distmod: ubuntu1604
    distarch: x86_64
    target_arch: x86_64

 

# 查看帮助信息
$ mongod --help

Options:

General options:
  -h [ --help ]                         show this usage information
  --version                             show version information
  -f [ --config ] arg                   configuration file specifying 
                                        additional options
  -v [ --verbose ] [=arg(=v)]           be more verbose (include multiple times
                                        for more verbosity e.g. -vvvvv)
  --quiet                               quieter output
  --port arg                            specify port number - 27017 by default
  --bind_ip arg                         comma separated list of ip addresses to
                                        listen on - localhost by default
  --bind_ip_all                         bind to all ip addresses
  --ipv6                                enable IPv6 support (disabled by 
                                        default)
  --listenBacklog arg (=128)            set socket listen backlog size
  --maxConns arg                        max number of simultaneous connections 
                                        - 1000000 by default
  --logpath arg                         log file to send write to instead of 
                                        stdout - has to be a file, not 
                                        directory
  --syslog                              log to system's syslog facility instead
                                        of file or stdout
  --syslogFacility arg                  syslog facility used for mongodb syslog
                                        message
  --logappend                           append to logpath instead of 
                                        over-writing
  --logRotate arg                       set the log rotation behavior 
                                        (rename|reopen)
  --timeStampFormat arg                 Desired format for timestamps in log 
                                        messages. One of ctime, iso8601-utc or 
                                        iso8601-local
  --pidfilepath arg                     full path to pidfile (if not set, no 
                                        pidfile is created)
  --timeZoneInfo arg                    full path to time zone info directory, 
                                        e.g. /usr/share/zoneinfo
  --keyFile arg                         private key for cluster authentication
  --noauth                              run without security
  --setParameter arg                    Set a configurable parameter
  --transitionToAuth                    For rolling access control upgrade. 
                                        Attempt to authenticate over outgoing 
                                        connections and proceed regardless of 
                                        success. Accept incoming connections 
                                        with or without authentication.
  --clusterAuthMode arg                 Authentication mode used for cluster 
                                        authentication. Alternatives are 
                                        (keyFile|sendKeyFile|sendX509|x509)
  --nounixsocket                        disable listening on unix sockets
  --unixSocketPrefix arg                alternative directory for UNIX domain 
                                        sockets (defaults to /tmp)
  --filePermissions arg                 permissions to set on UNIX domain 
                                        socket file - 0700 by default
  --fork                                fork server process
  --networkMessageCompressors [=arg(=disabled)] (=snappy)
                                        Comma-separated list of compressors to 
                                        use for network messages
  --auth                                run with security
  --clusterIpSourceWhitelist arg        Network CIDR specification of permitted
                                        origin for `__system` access.
  --slowms arg (=100)                   value of slow for profile and console 
                                        log
  --slowOpSampleRate arg (=1)           fraction of slow ops to include in the 
                                        profile and console log
  --profile arg                         0=off 1=slow, 2=all
  --cpu                                 periodically show cpu and iowait 
                                        utilization
  --sysinfo                             print some diagnostic system 
                                        information
  --noIndexBuildRetry                   don't retry any index builds that were 
                                        interrupted by shutdown
  --noscripting                         disable scripting engine
  --notablescan                         do not allow table scans
  --shutdown                            kill a running server (for init 
                                        scripts)

Replication options:
  --oplogSize arg                       size to use (in MB) for replication op 
                                        log. default is 5% of disk space (i.e. 
                                        large is good)

Master/slave options (old; use replica sets instead):
  --master                              master mode
  --slave                               slave mode
  --source arg                          when slave: specify master as 
                                        <server:port>
  --only arg                            when slave: specify a single database 
                                        to replicate
  --slavedelay arg                      specify delay (in seconds) to be used 
                                        when applying master ops to slave
  --autoresync                          automatically resync if slave data is 
                                        stale

Replica set options:
  --replSet arg                         arg is <setname>[/<optionalseedhostlist
                                        >]
  --replIndexPrefetch arg               specify index prefetching behavior (if 
                                        secondary) [none|_id_only|all]
  --enableMajorityReadConcern [=arg(=1)] (=1)
                                        enables majority readConcern

Sharding options:
  --configsvr                           declare this is a config db of a 
                                        cluster; default port 27019; default 
                                        dir /data/configdb
  --shardsvr                            declare this is a shard db of a 
                                        cluster; default port 27018

SSL options:
  --sslOnNormalPorts                    use ssl on configured ports
  --sslMode arg                         set the SSL operation mode 
                                        (disabled|allowSSL|preferSSL|requireSSL
                                        )
  --sslPEMKeyFile arg                   PEM file for ssl
  --sslPEMKeyPassword arg               PEM file password
  --sslClusterFile arg                  Key file for internal SSL 
                                        authentication
  --sslClusterPassword arg              Internal authentication key file 
                                        password
  --sslCAFile arg                       Certificate Authority file for SSL
  --sslCRLFile arg                      Certificate Revocation List file for 
                                        SSL
  --sslDisabledProtocols arg            Comma separated list of TLS protocols 
                                        to disable [TLS1_0,TLS1_1,TLS1_2]
  --sslWeakCertificateValidation        allow client to connect without 
                                        presenting a certificate
  --sslAllowConnectionsWithoutCertificates 
                                        allow client to connect without 
                                        presenting a certificate
  --sslAllowInvalidHostnames            Allow server certificates to provide 
                                        non-matching hostnames
  --sslAllowInvalidCertificates         allow connections to servers with 
                                        invalid certificates
  --sslFIPSMode                         activate FIPS 140-2 mode at startup

Storage options:
  --storageEngine arg                   what storage engine to use - defaults 
                                        to wiredTiger if no data files present
  --dbpath arg                          directory for datafiles - defaults to 
                                        /data/db
  --directoryperdb                      each database will be stored in a 
                                        separate directory
  --noprealloc                          disable data file preallocation - will 
                                        often hurt performance
  --nssize arg (=16)                    .ns file size (in MB) for new databases
  --quota                               limits each database to a certain 
                                        number of files (8 default)
  --quotaFiles arg                      number of files allowed per db, implies
                                        --quota
  --smallfiles                          use a smaller default file size
  --syncdelay arg (=60)                 seconds between disk syncs (0=never, 
                                        but not recommended)
  --upgrade                             upgrade db if needed
  --repair                              run repair on all dbs
  --repairpath arg                      root directory for repair files - 
                                        defaults to dbpath
  --journal                             enable journaling
  --nojournal                           disable journaling (journaling is on by
                                        default for 64 bit)
  --journalOptions arg                  journal diagnostic options
  --journalCommitInterval arg           how often to group/batch commit (ms)

WiredTiger options:
  --wiredTigerCacheSizeGB arg           maximum amount of memory to allocate 
                                        for cache; defaults to 1/2 of physical 
                                        RAM
  --wiredTigerJournalCompressor arg (=snappy)
                                        use a compressor for log records 
                                        [none|snappy|zlib]
  --wiredTigerDirectoryForIndexes       Put indexes and data in different 
                                        directories
  --wiredTigerCollectionBlockCompressor arg (=snappy)
                                        block compression algorithm for 
                                        collection data [none|snappy|zlib]
  --wiredTigerIndexPrefixCompression arg (=1)
                                        use prefix compression on row-store 
                                        leaf pages

 

 数据库操作：

$ mongo   # 进入shell
MongoDB shell version v3.6.0
connecting to: mongodb://127.0.0.1:27017
MongoDB server version: 3.6.0
Welcome to the MongoDB shell.
For interactive help, type "help".
For more comprehensive documentation, see
    http://docs.mongodb.org/
Questions? Try the support group
    http://groups.google.com/group/mongodb-user
> show dbs;  # 查看数据库列表
admin   0.000GB
config  0.000GB
local   0.000GB
> 

其它的数据增删改查等数据库操作有待更新补充。

 

参考：

mongodb 安装使用备记

官方的安装和测试教程（很详细）：Install MongoDB Community Edition on Ubuntu