linux IP命令总结

关注

原创最新推荐文章于 2026-09-23 16:40:54 发布 1.8k 阅读 AI 写同款· GEO 优化 ›

ip tunnel 隧道技术配置两台主机的 lo地址，用来测试用，如果不做gre的话，互相是ping不同对方的回环地址的。注意环境是主机1的ip：192.168.1.1 lo地址：1.1.1.1 主机2的ip：192.168.1.2 lo地址： 2.2.2.1 root@liuhao1:~# ip addr add 1.1.1.1/24 dev lo root@liuhao2:~# ip addr add 2.2.2.1/24 dev lo 配置gre # 开启两个主机的 ip_forward ，可以写在sy 阅读详情

root@ubuntu:~# ip help
Usage: ip [ OPTIONS ] OBJECT { COMMAND | help }
ip [ -force ] -batch filename
where OBJECT := { link | address | addrlabel | route | rule | neigh | ntable |
tunnel | tuntap | maddress | mroute | mrule | monitor | xfrm |
netns | l2tp | fou | macsec | tcp_metrics | token | netconf | ila |
vrf | sr }
OPTIONS := { -V[ersion] | -s[tatistics] | -d[etails] | -r[esolve] |
-h[uman-readable] | -iec |
-f[amily] { inet | inet6 | ipx | dnet | mpls | bridge | link } |
-4 | -6 | -I | -D | -B | -0 |
-l[oops] { maximum-addr-flush-attempts } | -br[ief] |
-o[neline] | -t[imestamp] | -ts[hort] | -b[atch] [filename] |
-rc[vbuf] [size] | -n[etns] name | -a[ll] |?-c[olor]}

用到的比较多的主要就是ip link | ip addr | ip route 其他的用到再更新

ip link delete { DEVICE | dev DEVICE | group DEVGROUP } type TYPE [ ARGS ]

ip link set { DEVICE | dev DEVICE | group DEVGROUP }
[ { up | down } ]
[ type TYPE ARGS ]
[ arp { on | off } ]
[ dynamic { on | off } ]
[ multicast { on | off } ]
[ allmulticast { on | off } ]
[ promisc { on | off } ]
[ trailers { on | off } ]
[ carrier { on | off } ]
[ txqueuelen PACKETS ]
[ name NEWNAME ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
[ netns { PID | NAME } ]
[ link-netnsid ID ]
[ alias NAME ]
[ vf NUM [ mac LLADDR ]
[ vlan VLANID [ qos VLAN-QOS ] [ proto VLAN-PROTO ] ]
[ rate TXRATE ]
[ max_tx_rate TXRATE ]
[ min_tx_rate TXRATE ]
[ spoofchk { on | off} ]
[ query_rss { on | off} ]
[ state { auto | enable | disable} ] ]
[ trust { on | off} ] ]
[ node_guid { eui64 } ]
[ port_guid { eui64 } ]
[ xdp { off |
object FILE [ section NAME ] [ verbose ] |
pinned FILE } ]
[ master DEVICE ][ vrf NAME ]
[ nomaster ]
[ addrgenmode { eui64 | none | stable_secret | random } ]
[ protodown { on | off } ]

ip link show [ DEVICE | group GROUP ] [up] [master DEV] [vrf NAME] [type TYPE]

ip link xstats type TYPE [ ARGS ]

ip link afstats [ dev DEVICE ]

ip link help [ TYPE ]

TYPE := { vlan | veth | vcan | vxcan | dummy | ifb | macvlan | macvtap |
bridge | bond | team | ipoib | ip6tnl | ipip | sit | vxlan |
gre | gretap | erspan | ip6gre | ip6gretap | ip6erspan |
vti | nlmon | team_slave | bond_slave | ipvlan | geneve |
bridge_slave | vrf | macsec }

# ip link show ：查看端口的具体信息

# ip link add eth1 name Test type bridge ：创建一个名字是Test的类型是bridge的eth1端口

2、ip route

root@ubuntu:~# ip route help
Usage: ip route { list | flush } SELECTOR
ip route save SELECTOR
ip route restore
ip route showdump
ip route get [ ROUTE_GET_FLAGS ] ADDRESS
[ from ADDRESS iif STRING ]
[ oif STRING ] [ tos TOS ]
[ mark NUMBER ] [ vrf NAME ]
[ uid NUMBER ]
ip route { add | del | change | append | replace } ROUTE
SELECTOR := [ root PREFIX ] [ match PREFIX ] [ exact PREFIX ]
[ table TABLE_ID ] [ vrf NAME ] [ proto RTPROTO ]
[ type TYPE ] [ scope SCOPE ]
ROUTE := NODE_SPEC [ INFO_SPEC ]
NODE_SPEC := [ TYPE ] PREFIX [ tos TOS ]
[ table TABLE_ID ] [ proto RTPROTO ]
[ scope SCOPE ] [ metric METRIC ]
[ ttl-propagate { enabled | disabled } ]
INFO_SPEC := NH OPTIONS FLAGS [ nexthop NH ]...
NH := [ encap ENCAPTYPE ENCAPHDR ] [ via [ FAMILY ] ADDRESS ]
[ dev STRING ] [ weight NUMBER ] NHFLAGS
FAMILY := [ inet | inet6 | ipx | dnet | mpls | bridge | link ]
OPTIONS := FLAGS [ mtu NUMBER ] [ advmss NUMBER ] [ as [ to ] ADDRESS ]
[ rtt TIME ] [ rttvar TIME ] [ reordering NUMBER ]
[ window NUMBER ] [ cwnd NUMBER ] [ initcwnd NUMBER ]
[ ssthresh NUMBER ] [ realms REALM ] [ src ADDRESS ]
[ rto_min TIME ] [ hoplimit NUMBER ] [ initrwnd NUMBER ]
[ features FEATURES ] [ quickack BOOL ] [ congctl NAME ]
[ pref PREF ] [ expires TIME ] [ fastopen_no_cookie BOOL ]
TYPE := { unicast | local | broadcast | multicast | throw |
unreachable | prohibit | blackhole | nat }
TABLE_ID := [ local | main | default | all | NUMBER ]
SCOPE := [ host | link | global | NUMBER ]
NHFLAGS := [ onlink | pervasive ]
RTPROTO := [ kernel | boot | static | NUMBER ]
PREF := [ low | medium | high ]
TIME := NUMBER[s|ms]
BOOL := [1|0]
FEATURES := ecn
ENCAPTYPE := [ mpls | ip | ip6 | seg6 | seg6local ]
ENCAPHDR := [ MPLSLABEL | SEG6HDR ]
SEG6HDR := [ mode SEGMODE ] segs ADDR1,ADDRi,ADDRn [hmac HMACKEYID] [cleanup]
SEGMODE := [ encap | inline ]
ROUTE_GET_FLAGS := [ fibmatch ]

2、ip address

root@ubuntu:~# ip address help
Usage: ip address {add|change|replace} IFADDR dev IFNAME [ LIFETIME ]
[ CONFFLAG-LIST ]
ip address del IFADDR dev IFNAME [mngtmpaddr]
ip address {save|flush} [ dev IFNAME ] [ scope SCOPE-ID ]
[ to PREFIX ] [ FLAG-LIST ] [ label LABEL ] [up]
ip address [ show [ dev IFNAME ] [ scope SCOPE-ID ] [ master DEVICE ]
[ type TYPE ] [ to PREFIX ] [ FLAG-LIST ]
[ label LABEL ] [up] [ vrf NAME ] ]
ip address {showdump|restore}
IFADDR := PREFIX | ADDR peer PREFIX
[ broadcast ADDR ] [ anycast ADDR ]
[ label IFNAME ] [ scope SCOPE-ID ]
SCOPE-ID := [ host | link | global | NUMBER ]
FLAG-LIST := [ FLAG-LIST ] FLAG
FLAG := [ permanent | dynamic | secondary | primary |
[-]tentative | [-]deprecated | [-]dadfailed | temporary |
CONFFLAG-LIST ]
CONFFLAG-LIST := [ CONFFLAG-LIST ] CONFFLAG
CONFFLAG := [ home | nodad | mngtmpaddr | noprefixroute | autojoin ]
LIFETIME := [ valid_lft LFT ] [ preferred_lft LFT ]
LFT := forever | SECONDS
TYPE := { vlan | veth | vcan | vxcan | dummy | ifb | macvlan | macvtap |
bridge | bond | ipoib | ip6tnl | ipip | sit | vxlan | lowpan |
gre | gretap | erspan | ip6gre | ip6gretap | ip6erspan | vti |
nlmon | can | bond_slave | ipvlan | geneve | bridge_slave |
hsr | macsec

4、ip netns

虚拟化网络都是基于netns实现
ip-netns - process network namespace management  #管理网络名称空间工具

网络命名空间在逻辑上是网络堆栈的另一个副本，具有自己的路由，防火墙规则和网络设备。 默认情况下，进程从其父级继承其网络命名空间。最初，所有进程共享相同的默认网络名称空间 来自init进程。

SYNOPSIS         top　　　　　　　　#用法
       ip [ OPTIONS ] netns  { COMMAND | help }

       ip netns [ list ]    #列出所有名称空间
  
       ip netns add NETNSNAME       #创建一个新的名称空间

       ip netns attach NETNSNAME PID       

       ip [-all] netns del [ NETNSNAME ]     #伤处一个名称空间

       ip netns set NETNSNAME NETNSID      

       ip netns identify [ PID ]

       ip netns pids NETNSNAME

       ip [-all] netns exec [ NETNSNAME ] command...      #在网络名称空间执行指定命令
 
       ip netns monitor

       ip netns list-id

 ip [-all] netns delete [ NAME ] - delete the name of a network namespace(s)

[root@localhost netreport]# ip netns add testspace   #添加一个名称空间
[root@localhost netreport]# ip netns list            #列出
testspace

[root@localhost netreport]# ip netns del testspace    #删除

[root@localhost netreport]# ip netns add testspace

[root@localhost netreport]# ip netns exec testspace ifconfig -a    #执行命令
lo: flags=8<LOOPBACK>  mtu 65536
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@localhost netreport]#

ip-link: network device configuration

#ip link 网络设备管理工具，用于配置虚拟网卡
[root@localhost netreport]# ip link help      
Usage: ip link add [link DEV] [ name ] NAME
                   [ txqueuelen PACKETS ]
                   [ address LLADDR ]
                   [ broadcast LLADDR ]
                   [ mtu MTU ] [index IDX ]
                   [ numtxqueues QUEUE_COUNT ]
                   [ numrxqueues QUEUE_COUNT ]
                   type TYPE [ ARGS ]

       ip link delete { DEVICE | dev DEVICE | group DEVGROUP } type TYPE [ ARGS ]

       ip link set { DEVICE | dev DEVICE | group DEVGROUP }
	                  [ { up | down } ]
	                  [ type TYPE ARGS ]
	                  [ arp { on | off } ]
	                  [ dynamic { on | off } ]
	                  [ multicast { on | off } ]
	                  [ allmulticast { on | off } ]
	                  [ promisc { on | off } ]
	                  [ trailers { on | off } ]
	                  [ carrier { on | off } ]
	                  [ txqueuelen PACKETS ]
	                  [ name NEWNAME ]
	                  [ address LLADDR ]
	                  [ broadcast LLADDR ]
	                  [ mtu MTU ]
	                  [ netns { PID | NAME } ]
	                  [ link-netnsid ID ]
			  [ alias NAME ]
	                  [ vf NUM [ mac LLADDR ]
				   [ vlan VLANID [ qos VLAN-QOS ] [ proto VLAN-PROTO ] ]
				   [ rate TXRATE ]
				   [ max_tx_rate TXRATE ]
				   [ min_tx_rate TXRATE ]
				   [ spoofchk { on | off} ]
				   [ query_rss { on | off} ]
				   [ state { auto | enable | disable} ] ]
				   [ trust { on | off} ] ]
				   [ node_guid { eui64 } ]
				   [ port_guid { eui64 } ]
			  [ xdp { off |
				  object FILE [ section NAME ] [ verbose ] |
				  pinned FILE } ]
			  [ master DEVICE ][ vrf NAME ]
			  [ nomaster ]
			  [ addrgenmode { eui64 | none | stable_secret | random } ]
	                  [ protodown { on | off } ]

       ip link show [ DEVICE | group GROUP ] [up] [master DEV] [vrf NAME] [type TYPE]

       ip link xstats type TYPE [ ARGS ]

       ip link afstats [ dev DEVICE ]

       ip link help [ TYPE ]

TYPE := { vlan | veth | vcan | dummy | ifb | macvlan | macvtap |
          bridge | bond | team | ipoib | ip6tnl | ipip | sit | vxlan |
          gre | gretap | ip6gre | ip6gretap | vti | nlmon | team_slave |
          bond_slave | ipvlan | geneve | bridge_slave | vrf | macsec }
[root@localhost netreport]#

常用命令

ip link add - 添加虚拟链接
ip link delete - 删除虚拟链接
ip link set - 更改设备属性
ip link show - 显示设备属性
ip link xstats - 显示扩展统计信息
ip link afstats - 显示特定于地址的系列统计信息
ip link help - 显示帮助

显示设备属性

ip link show - display device attributes

  dev NAME：specifies the network device to show. (default) 如果不指定设备，则显示所有设备信息
  up：only display running interfaces. 只显示启动的接口

添加虚拟设备

ip link add - add virtual link

link DEVICE：specifies the physical device to act operate on. 指定在哪个物理设备上操作
NAME：specifies the name of the new virtual device. 指定新虚拟设备的名称
TYPE：specifies the type of the new device. 指定新设备的类型
Link types:
  vlan - 802.1q tagged virtual LAN interface
  veth - Virtual ethernet interface 虚拟网络接口（一对）
  vcan - Virtual Local CAN interface
  dummy - Dummy network interface
  ifb - Intermediate Functional Block device
  macvlan - virtual interface base on link layer address (MAC)
  can - Controller Area Network interface
  bridge - Ethernet Bridge device 网桥设备

删除虚拟设备

ip link delete - delete virtual link

  DEVICE：specifies the virtual  device to act operate on.
  TYPE：specifies the type of the device.
  dev DEVICE：specifies the physical device to act operate on.

设置设备属性

ip link set - change device attributes

  dev DEVICE：specifies network device to operate on.
  up and down：change the state of the device to UP or DOWN. 启动或关闭网卡
  multicast on or multicast off：change the MULTICAST flag on the device. 启用或禁用组播
  name NAME：change the name of the device. 修改网卡名称。需要先donw掉网卡，不然会提示busy。
    This operation is not recommended if the device is running or has some addresses already configured.
  alias NAME：give the device a symbolic name for easy reference. 为网卡设置别名
  mtu NUMBER：change the MTU of the device. 设置MTU大小，默认为1500
  netns NETNSNAME：move the device to the network namespace associated with name NETNSNAME. 将接口移动到指定的网络名称空间

veth - Virtual ethernet interface #虚拟以太网卡

#veth设备是成对出现的，一端连接的是内核协议栈，一端彼此相连。一个设备收到协议栈的数据，会将数据发送另一个设备上去。大概结构如下：

+----------------------------------------------------------------+
|                                                                |
|       +------------------------------------------------+       |
|       |             Newwork Protocol Stack             |       |
|       +------------------------------------------------+       |
|              ↑               ↑               ↑                 |
|..............|...............|...............|.................|
|              ↓               ↓               ↓                 |
|        +----------+    +-----------+   +-----------+           |
|        |   eth0   |    |   veth0   |   |   veth1   |           |
|        +----------+    +-----------+   +-----------+           |
|192.168.100.100  ↑               ↑               ↑                 |
|              |               +---------------+                 |
|              |          10.1.1.1/24       10.1.1.2/24               |
+--------------|-------------------------------------------------+
               ↓
         Physical Network

示例

创建一对虚拟网卡，新建的网卡默认都是关闭的，名称空间里的回环网卡lo默认也是关闭的。

[root@localhost netreport]# ip link add name veth1 type veth peer name veth2
[root@localhost netreport]# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 00:0c:29:8b:7c:a1 brd ff:ff:ff:ff:ff:ff
3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default 
    link/ether 02:42:3d:8c:f3:de brd ff:ff:ff:ff:ff:ff
7: vetha2d7cb7@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT group default 
    link/ether 3a:54:20:3d:ff:16 brd ff:ff:ff:ff:ff:ff link-netnsid 0
8: veth2@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 8a:ed:62:73:ec:f6 brd ff:ff:ff:ff:ff:ff
9: veth1@veth2: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether da:6c:01:ef:3b:6a brd ff:ff:ff:ff:ff:ff
[root@localhost netreport]#

#一块网卡只能属于一个名称空间, 将veth2 网卡配置为testspace 名称空间
[root@localhost netreport]# ip link set dev veth2 netns testspace
[root@localhost netreport]# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 00:0c:29:8b:7c:a1 brd ff:ff:ff:ff:ff:ff
3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default 
    link/ether 02:42:3d:8c:f3:de brd ff:ff:ff:ff:ff:ff
7: vetha2d7cb7@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP mode DEFAULT group default 
    link/ether 3a:54:20:3d:ff:16 brd ff:ff:ff:ff:ff:ff link-netnsid 0
9: veth1@if8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether da:6c:01:ef:3b:6a brd ff:ff:ff:ff:ff:ff link-netnsid 1
[root@localhost netreport]#

　让两块在不同名称空间网卡通信

[root@localhost netreport]# ip netns list
testspace (id: 1)
[root@localhost netreport]# ip netns exec testspace ip link set dev veth2 name veth0    #可以修改dev name
[root@localhost netreport]# ip netns exec testspace ifconfig　　　　　　　　
[root@localhost netreport]# ip netns exec testspace ifconfig -a　　　　　　　　　　　　　　　　#显示网卡
lo: flags=8<LOOPBACK>  mtu 65536
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

veth0: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 8a:ed:62:73:ec:f6  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@localhost netreport]# ip netns exec testspace ifconfig veth0 10.1.1.2/24
[root@localhost netreport]# ip netns exec testspace ifconfig veth0 10.1.1.2/24 up     #配置名称空间网卡地址，并启动
[root@localhost netreport]# ip netns exec testspace ifconfig -a
lo: flags=8<LOOPBACK>  mtu 65536
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

veth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 10.1.1.2  netmask 255.255.255.0  broadcast 10.1.1.255
        ether 8a:ed:62:73:ec:f6  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@localhost netreport]# 
[root@localhost netreport]# ifconfig veth1 10.1.1.1/24
[root@localhost netreport]# ifconfig veth1 10.1.1.1/24 up                #配置本地虚拟网卡地址并启动
[root@localhost netreport]# ping 10.1.1.2
PING 10.1.1.2 (10.1.1.2) 56(84) bytes of data.
64 bytes from 10.1.1.2: icmp_seq=1 ttl=64 time=0.079 ms
64 bytes from 10.1.1.2: icmp_seq=2 ttl=64 time=0.089 ms
64 bytes from 10.1.1.2: icmp_seq=3 ttl=64 time=0.067 ms
^C
--- 10.1.1.2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 0.067/0.078/0.089/0.011 ms
[root@localhost netreport]#

外部访问容器

容器中可以运行一些网络应用，要让外部也可以访问这些应用，可以通过 -P 或 -p 参数来指定端口映射。

当使用 -P 标记时，Docker 会随机映射一个 49000~49900 的端口到内部容器开放的网络端口。

[root@localhost ~]# docker run -dit -P nginx   #-P 生成随机端口映射
ce812985c0066f2ed13f31b39e1ddd91324b3b4562e92a4ec1f7542d6e995afc
[root@localhost ~]# docker container ls -a
CONTAINER ID        IMAGE                              COMMAND                  CREATED             STATUS              PORTS                   NAMES
ce812985c006        nginx                              "nginx -g 'daemon of…"   3 seconds ago       Up 3 seconds        0.0.0.0:32768->80/tcp   gifted_williamson
1303d8ae1869        dockerpracticecn/docker_practice   "nginx -g 'daemon of…"   22 hours ago        Up 22 hours         0.0.0.0:8080->80/tcp    eager_vaughan
[root@localhost ~]#

[root@localhost ~]# docker run -dit -p 8000:80  nginx    #宿主机所有地址的8000 端口，指定端口
02dda7bad87e9801e638786a46c5685f8f8b91f41b0052198a5ad0daaeed1686
[root@localhost ~]# docker container ls -a
CONTAINER ID        IMAGE                              COMMAND                  CREATED              STATUS              PORTS                   NAMES
02dda7bad87e        nginx                              "nginx -g 'daemon of…"   3 seconds ago        Up 1 second         0.0.0.0:8000->80/tcp    tender_hugle
ce812985c006        nginx                              "nginx -g 'daemon of…"   About a minute ago   Up About a minute   0.0.0.0:32768->80/tcp   gifted_williamson
1303d8ae1869        dockerpracticecn/docker_practice   "nginx -g 'daemon of…"   22 hours ago         Up 22 hours         0.0.0.0:8080->80/tcp    eager_vaughan
[root@localhost ~]#

[root@localhost ~]# docker run -dit -p 192.168.100.100:9000:80  nginx   #限定地址端口
f22564d9af806afe99fda755c885fb3ecc414fcb4ae1847234981c882eb98ede
[root@localhost ~]# docker container ls -a
CONTAINER ID        IMAGE                              COMMAND                  CREATED              STATUS              PORTS                          NAMES
f22564d9af80        nginx                              "nginx -g 'daemon of…"   3 seconds ago        Up 2 seconds        192.168.100.100:9000->80/tcp   wonderful_jepsen
02dda7bad87e        nginx                              "nginx -g 'daemon of…"   About a minute ago   Up About a minute   0.0.0.0:8000->80/tcp           tender_hugle
ce812985c006        nginx                              "nginx -g 'daemon of…"   2 minutes ago        Up 2 minutes        0.0.0.0:32768->80/tcp          gifted_williamson
1303d8ae1869        dockerpracticecn/docker_practice   "nginx -g 'daemon of…"   22 hours ago         Up 22 hours         0.0.0.0:8080->80/tcp           eager_vaughan
[root@localhost ~]#

[root@localhost ~]# docker port f225        #查看容器映射端口
80/tcp -> 192.168.100.100:9000
[root@localhost ~]#

共享宿主机网络名称空间

[root@localhost ~]# docker run --name b4 -it --network host --rm busybox    #网络模型host 
/ # 
/ # ifocnfig
sh: ifocnfig: not found
/ # ifconfig
br-89e62c51620f Link encap:Ethernet  HWaddr 02:42:CF:83:F2:C1  
          inet addr:172.18.0.1  Bcast:172.18.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

docker0   Link encap:Ethernet  HWaddr 02:42:3D:8C:F3:DE  
          inet addr:172.17.0.1  Bcast:172.17.255.255  Mask:255.255.0.0
          inet6 addr: fe80::42:3dff:fe8c:f3de/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:303 errors:0 dropped:0 overruns:0 frame:0
          TX packets:251 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:728619 (711.5 KiB)  TX bytes:28556 (27.8 KiB)

ens33     Link encap:Ethernet  HWaddr 00:0C:29:8B:7C:A1  
          inet addr:192.168.100.100  Bcast:192.168.100.255  Mask:255.255.255.0
          inet6 addr: fe80::d634:8c5a:a11c:8da8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9777 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9749 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:955036 (932.6 KiB)  TX bytes:1692136 (1.6 MiB)

容器互联

[root@localhost ~]# docker network create -d bridge my-net             #新建一个网络名称空间
7563ccc4b9ce8ab73fa9ea49a7cc0ed900e5bd9cc8e65393baaee0764c61bee8
[root@localhost ~]# docker network ls
NETWORK ID          NAME                DRIVER              SCOPE
d4846dd9d420        bridge              bridge              local
89e62c51620f        help                bridge              local
16d30c89207b        host                host                local
7563ccc4b9ce        my-net              bridge              local
c8c1dd52cd81        none                null                local

[root@localhost ~]# ifconfig     
br-7563ccc4b9ce: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500     #新创建的网桥
        inet 172.19.0.1  netmask 255.255.0.0  broadcast 172.19.255.255
        inet6 fe80::42:edff:fec6:5157  prefixlen 64  scopeid 0x20<link>
        ether 02:42:ed:c6:51:57  txqueuelen 0  (Ethernet)
        RX packets 4  bytes 280 (280.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 12  bytes 936 (936.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

br-89e62c51620f: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 172.18.0.1  netmask 255.255.0.0  broadcast 172.18.255.255
        ether 02:42:cf:83:f2:c1  txqueuelen 0  (Ethernet)
        RX packets 4  bytes 280 (280.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 20  bytes 1592 (1.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
        inet6 fe80::42:3dff:fe8c:f3de  prefixlen 64  scopeid 0x20<link>
        ether 02:42:3d:8c:f3:de  txqueuelen 0  (Ethernet)
        RX packets 303  bytes 728619 (711.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 251  bytes 28556 (27.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

　运行一个容器并连接到新建的 my-net 网络

[root@localhost ~]# docker run -it --rm --name busybox1 --network my-net busybox sh    #启动一个容器 并加入指定网络
/ #

[root@localhost ~]# docker run -it --rm --name busybox2 --network my-net busybox sh        #测试统一名称空间的容器通信
/ # ping busybox1 
PING busybox1 (172.19.0.2): 56 data bytes
64 bytes from 172.19.0.2: seq=0 ttl=64 time=0.116 ms
64 bytes from 172.19.0.2: seq=1 ttl=64 time=0.091 ms
^C
--- busybox1 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.091/0.103/0.116 ms
/ #

收录于