aostas的博客

sudo apt-get install lib32z1//安装32位兼容库 cd ~ git clone https://github.com/xupsh/CodeSourcery.git//安装交叉编译工具链 sudo gedit ~/.bashrc 添加export ARCH=arm export CROSS_COMPILE=arm-xilinx-linux-gnueabi- expo

cd ~mkdir buildgit clone https://github.com/Xilinx/u-boot-xlnx.git //获取U-Boot镜像cd u-boot-xlnxmake distclean//清理目标文件防止出错make zynq_zybo_config//加载zybo配置make //编译cp u-boot u-boot.elf

打开vivado工程并生成bit stream 导入到 sdk 打开sdk 创建预置的fsbl工程 Xilinx Tools>Creat Boot Image 选择BIF file path 选择Output path 在Boot image partitions中 add>fsbl.elf add>XXX.bit add>u-boot.elf Creat Image

cd ~/build git clone https://github.com/Xilinx/linux-xlnx.git//获取源代码 cd linux-xlnx git checkout xilinx-v2015.2//改版本与网上大多数教程匹配 make distclean make xilinx_zynq_defconfig make menuconfig//编辑内核 还不会 直接退出 m