Linux显示模式配置-优快云博客

本文链接：https://blog.youkuaiyun.com/annicybc/article/details/2245478

在linux下显示方式设置：

　　# 0 - 停机（千万不能把initdefault 设置为0 ）

　　# 1 - 单用户模式

　　# 2 - 多用户，没有 NFS

　　# 3 - 完全多用户模式(标准的运行级)

　　# 4 - 没有用到

　　# 5 - X11 （xwindow)

　　# 6 - 重新启动（千万不要把initdefault 设置为6 ）

比如命令行下输入：init 1就进入的单用户的命令行模式，init 5就进入的window模式。在安装vmware tool过程中就需要使用命令行模式下进行配置。

按照完vm之后，安装于其下的linux就可以设置显示方式了。步骤如下：

1）在Xwindow下新建一个终端，输入init 1；
2）进入命令行模式后，进入到/etc/X11，命令：cd /etc/X11；
3）vi XF86Config
4）修改显示相关参数：Section "Screen" 中的Subsection "Display"下的Modes "640x480"修改一下即可。
5）保存好之后再命令行中输入init 5即可回到xwindow环境下。

以下是XF86Config的配置文件全文，供大家参考：

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier     "Default Layout"
Screen      0 "Screen0" 0 0
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver      "keyboard"
Option     "XkbRules" "xfree86"
Option     "XkbModel" "pc105"
Option     "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver      "vmmouse"
Option     "Protocol" "IMPS/2"
Option     "Device" "/dev/psaux"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver      "vmmouse"
Option     "Protocol" "IMPS/2"
Option     "Device" "/dev/input/mice"
Option     "ZAxisMapping" "4 5"
Option     "Emulate3Buttons" "no"
EndSection

Section "Device"
Identifier "VMware SVGA"
Driver "vmware"
EndSection

Section "Screen"
Identifier "Screen0"
    Device      "VMware SVGA"
    Monitor     "vmware"
    # Don't specify DefaultColorDepth unless you know what you're
    # doing. It will override the driver's preferences which can
    # cause the X server not to run if the host doesn't support the
    # depth.
    Subsection "Display"
        # VGA mode: better left untouched
        Depth       4
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       8
        Modes       "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "800x600"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "800x600"
        ViewPort    0 0
    EndSubsection
EndSection