How to Move Linux OS Installation to Another Drive

最新推荐文章于 2025-12-09 09:15:00 发布

原创最新推荐文章于 2025-12-09 09:15:00 发布 · 991 阅读

CC 4.0 BY-SA版权

文章标签：

Have you ever wondered if you could move Linux OS installation to another drive? Well, yes, that is definitely possible. Moving a Linux installation to another drive involves copying the existing system files and updating the bootloader configuration on the new drive.

Migrating Linux OS Installation to Another Drive

Migrating Linux OS Installation to Another Drive

Why Move Linux OS to Another Drive?

But, why would one want to move a Linux OS installation to another drive? There could be various reasons, but some of them could be:

Upgrade or Replace Hard Drive: The most common reason is to replace an existing hard drive with a larger one or upgrade to a faster drive, such as a solid-state drive (SSD).
Migration to a New Computer: If you’re getting a new computer and want to retain your existing Linux setup, moving the installation to the new drive can be a way to achieve this.
Disk Space Issues: Running out of disk space on the current drive might prompt the need to move to a larger one.
Performance Improvement: Switching to a faster drive type, like moving from an HDD to an SSD, can significantly improve system performance.
Backup and Recovery: Moving the installation to a different drive can be part of a backup and recovery strategy, especially if you’re concerned about the health of your current drive.
Experimentation and Testing: Linux enthusiasts and system administrators might want to experiment with different drives or configurations for testing purposes.
Repartitioning and Resizing: If you need to repartition your drives or resize existing partitions, moving the Linux installation to a different drive allows for more flexibility.
Replacing Faulty Drive: If your current drive is failing or has bad sectors, moving the installation to a new drive can help in avoiding data loss and system instability.

So for my case, I will be moving my Ubuntu OS installation from a old Laptop to a new Laptop with better performance.

So, what are the steps that you can use to move Linux OS to another drive?

Backup your current system to avoid data loss just in case things don’t go well.
Ensure the new drive has same or even more disk space compared to the current drive.
Create Bootable USB with a Live ISO of your preferred Linux distro. I am using Ubuntu 22.04 Live ISO here.
Remove your new Laptop drive and attach to your current Linux system or vice versa. Ensure you have disk/card reader, whether it is for SSD or HDD.
Boot your current Linux system from the Live CD/USB. This is necessary because you can’t make changes to a mounted Linux system.
Create partitions on the new drive similar to the partitions on the current drive.
Copy data from the current drive to the new drive
Update FSTAB accordingly.
Install the GRUB on the new drive.
Update Initial RAM filesystem.
Cross your Fingers, Reboot and confirm

Note, If you are using LUKS encryption on your current drive and want to retain same LUKS encryption on new drive, I suggest that before you create partitions and copy data to new drive, create LUKS on it. After that, you can now create partitions, mount it and copy data from the old/current drive.

So, let’s get into this!

Backup your Linux System Data

Before you can even think of attempting to play with your system disk, ensure your have your backups done and verified.

You can check various backup tutorials we have;

How to backup Linux data

Confirm Drive Sizes

I am moving my Linux from a 256 GB SSD drive to a 256 GB Drive.

My current Linux OS disk usage;

df -hT -P /Copy

Filesystem                Type  Size  Used Avail Use% Mounted on
/dev/mapper/vgubuntu-root ext4  232G  164G   57G  75% /

And it is an SSD;

lsblk -o name,rotaCopy

nvme0n1                  0
├─nvme0n1p1              0
├─nvme0n1p2              0
└─nvme0n1p3              0
  └─nvme0n1p3_crypt      0
    ├─vgubuntu-root      0
    └─vgubuntu-swap_1    0

ROTA=0: Indicates a non-rotational device, usually a solid-state drive (SSD).

As as you can see, my drive is LUKS encrypted! See lsblk output, nvme0n1p3_crypt.

Create Bootable USB with a Live ISO of your Preferred Linux Distro

As already mentioned, I am using Ubuntu 22.04 Live ISO burnt into a bootable USB drive.

I used dd command to create a bootable USB drive with live Ubuntu 22.04;

lsblkCopy

NAME                  MAJ:MIN RM   SIZE RO TYPE  MOUNTPOINT
sda                     8:0    1   7.5G  0 disk  
└─sda1                  8:1    1   7.5G  0 part

Create bootable Live USB!

sudo dd bs=1M if=/media/kifarunix/vol02/ubuntu-22.04-desktop-amd64.iso of=/dev/sda1 status=progress oflag=syncCopy

Boot your Current Linux System from the Live CD/USB

With live bootable USB attached to your current Linux system (we assume this is the system that has our current Linux OS installation):

Power it off
Boot to bios to update the boot order. Set the bootable USB as the first one to boot from.
Save the changes and boot your new system to live OS.
When the live OS boots, choose Try Ubuntu (remember we are using an Ubuntu live image here) and proceed to boot into it.

Detach New System Drive Attach your Current Linux System

Poweroff the system with your new drive.
Once it is off, detach the drive (how to remove a drive varies from system to system. Use Youtube videos to check how to detach a drive on your respective Laptop model).
After you have removed the drive, attach it to current Laptop (now running in Live ISO) via a card/drive reader.

Create Partitions on the New Drive

You need to create partitions on the new system’s drive similar to the partitions on the current Linux OS installation drive.

Check available drives

Now, that we have attached our current Linux OS installation drive to new Laptop, let’s confirm the drives from the Live OS!

sudo su -Copy

lsblk | grep -iv loopCopy

NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda           8:0    1   7.5G  0 disk 
├─sda1        8:1    1   4.7G  0 part /cdrom
├─sda2        8:2    1   4.9M  0 part 
├─sda3        8:3    1   300K  0 part 
└─sda4        8:4    1   2.8G  0 part /var/crash
                                      /var/log
sdb           8:16   0 238.5G  0 disk /media/ubuntu/SSD
nvme0n1     259:0    0 238.5G  0 disk 
├─nvme0n1p1 259:1    0   512M  0 part 
├─nvme0n1p2 259:2    0   732M  0 part 
└─nvme0n1p3 259:3    0 237.3G  0 part

Where:

sda is the bootable USB drive
sdb is the new Linux OS installation drive
nvme is the current drive with our current Linux OS installation.

Confirm the Partitions and Partition Scheme

Confirm the partitions on the current Linux OS installation drive;

parted /dev/nvme0n1 pCopy

Sample output;

Model: WDC PC SN730 SDBPNTY-256G-1101 (nvme)
Disk /dev/nvme0n1: 256GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags: 

Number  Start   End     Size   File system  Name                  Flags
 1      1049kB  538MB   537MB  fat32        EFI System Partition  boot, esp
 2      538MB   1305MB  768MB  ext4
 3      1305MB  256GB   255GB

The drive is partitioned using GPT (GUID Partition Table) partition table.
It is also UEFI partition as shown by the “boot” and “esp” (EFI System Partition) flags.

Is the Drive LUKS encrypted?

One thing to note also is that my current Linux OS installation drive is LUKS encrypted!

blkid | grep nvme0n1Copy

/dev/nvme0n1p1: UUID="CF45-D10D" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="2a76337e-fa5b-4def-8958-54eb2b15a2ab"
/dev/nvme0n1p2: UUID="6b905fe4-46c6-438e-a800-30ca9ff9f047" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="73482e3b-d43a-4432-bb36-ce342f231b06"
/dev/nvme0n1p3: UUID="f36fbf36-b4e7-43d8-add5-55eb31fe92e2" TYPE="crypto_LUKS" PARTUUID="cb48c987-3dfa-4b6c-a413-5a45a7310ae7"

As you can see, /dev/nvme0n1p3 device is of type TYPE="crypto_LUKS".

Swap might also be there. But until you mount the LUKS drive, you wont see it. Anyway, you can always add swap whenever you want.

If you need to ensure that the new drive will also be LUKS encrypted, then you need to format it, create LUKS on it and partition it.

Create Partitions on New Drive

So, let’s format the new drive with GPT partition table;

umunt /dev/sdbCopy

parted /dev/sdb mklabel gptCopy

If you are prompted about existing data being destroyed, confirm and proceed.

Create EFI partition of 512MiB similar to current Linux OS installation.

parted /dev/sdb mkpart primary fat32 1MiB 513MiBCopy

Initialize the ESP partition;

parted /dev/sdb set 1 esp onCopy

Create Boot partition. I created boot partition of 1GB, a little bit bigger than the current Linux OS installation one ;

parted /dev/sdb mkpart primary ext4 513MiB 1537MiBCopy

Create the root partition;

parted /dev/sdb mkpart primary ext4 1537MiB 100%Copy

Confirm;

parted /dev/sdb pCopy

Model: JMicron Generic (scsi)
Disk /dev/sdb: 256GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags: 

Number  Start   End     Size    File system  Name     Flags
 1      1049kB  538MB   537MB   ext4         primary  boot, esp
 2      538MB   1612MB  1074MB               primary
 3      1612MB  256GB   254GB                primary

lsblkCopy

sda           8:0    1   7.5G  0 disk 
├─sda1        8:1    1   4.7G  0 part /cdrom
├─sda2        8:2    1   4.9M  0 part 
├─sda3        8:3    1   300K  0 part 
└─sda4        8:4    1   2.8G  0 part /var/crash
                                      /var/log
sdb           8:16   0 238.5G  0 disk 
├─sdb1        8:17   0   512M  0 part 
├─sdb2        8:18   0     1G  0 part 
└─sdb3        8:19   0   237G  0 part 
nvme0n1     259:0    0 238.5G  0 disk 
├─nvme0n1p1 259:4    0   512M  0 part 
├─nvme0n1p2 259:5    0   732M  0 part 
└─nvme0n1p3 259:6    0 237.3G  0 part

Is the LUKS Drive using LVM?

You would just run the pvs command to check but since we are running on Live OS, then you need first unlock the LUKS drive to check.

cryptsetup luksOpen /dev/nvme0n1p3 dm_crypt-0Copy

You will be prompted to enter the LUKS decryption passphrase.

Once you unlock the drive, check using pvs or dmsetup table command.

pvsCopy

  PV                     VG       Fmt  Attr PSize   PFree 
  /dev/mapper/dm_crypt-0 vgubuntu lvm2 a--  237.24g 36.00m

dmsetup tableCopy

Each should show you if LVM is on!

Sample output of dmsetup table command.

dm_crypt-0: 0 497534976 crypt aes-xts-plain64 :64:logon:cryptsetup:f36fbf36-b4e7-43d8-add5-55eb31fe92e2-d0 0 259:6 32768
vgubuntu-root: 0 495460352 linear 253:0 2048
vgubuntu-swap_1: 0 1998848 linear 253:0 495462400

So, if using LVM, then before you create the logical volumes on your new drive, you need to LUKS encrypt it first.

Thus, let’s encrypt the new drive root’s partition with LUKS;

cryptsetup luksFormat /dev/sdb3Copy

Be sure to keep your passphrase safe and in a place you can easily retrieve!

Unlock the LUKS drive so you can create the partitions.

cryptsetup luksOpen /dev/sdb3 dm_crypt-1Copy

This will add a <name> mapping to /dev/mapper/ e.g /dev/mapper/nvme0n1p3_crypt.

lsblkCopy

sdb                  8:16   0 238.5G  0 disk  
├─sdb1               8:17   0   512M  0 part  
├─sdb2               8:18   0     1G  0 part  
└─sdb3               8:19   0   237G  0 part  
  └─dm_crypt-1     253:3    0   237G  0 crypt 
nvme0n1            259:0    0 238.5G  0 disk  
├─nvme0n1p1        259:4    0   512M  0 part  
├─nvme0n1p2        259:5    0   732M  0 part  
└─nvme0n1p3        259:6    0 237.3G  0 part  
  └─dm_crypt-0     253:0    0 237.2G  0 crypt 
    ├─vgubuntu-root
    │              253:1    0 236.3G  0 lvm   
    └─vgubuntu-swap_1
                   253:2    0   976M  0 lvm

You can now proceed create partitions on the new drive using the mapped device, /dev/mapper/dm_crypt-1.

pvcreate  /dev/mapper/dm_crypt-1Copy

Create Volume group. Do not use the same name of the VG as the existing one!

vgcreate ubuntuvg /dev/mapper/dm_crypt-1Copy

Create logical volume using entire space. If you want, you can create swap as well.

For example;

lvcreate -L 1G -n swap ubuntuvgCopy

The create root LVM using entire remaining space;

lvcreate -l +100%FREE -n root ubuntuvgCopy

Confirm the logical volumes;

lvsCopy

  LV     VG       Attr       LSize    Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  root   ubuntuvg -wi-a----- <235.96g                                                    
  swap   ubuntuvg -wi-a-----    1.00g                                                    
  root   vgubuntu -wi-a-----  236.25g                                                    
  swap_1 vgubuntu -wi-a-----  976.00m

Create Filesystems on the Partitions

EFI parition should be set to FAT32 and boot and root devices, set to EXT4;

mkfs.fat -F32 /dev/sdb1Copy

mkfs.ext4 /dev/sdb2Copy

mkfs.ext4 /dev/mapper/ubuntuvg-rootCopy

Make swap!

mkswap /dev/mapper/ubuntuvg-swapCopy

Move Linux OS to Another Drive

It is now time to migrate or move your Linux OS installation to another drive.

Remember, that our Linux OS installation is currently residing on the /dev/nvme0n1p3 drive and we migrating it to our new system's drive, /dev/sdb.

Mount Old and New Drives

Old here means, the drive with the Linux OS installation, /dev/nvme0n1p3.

mkdir /mnt/{sdb,nvme}Copy

Mount the current Linux OS root partition to /mnt/nvme
boot partition to /mnt/nvme/boot.
EFI partition to /mnt/nvme0n1p3/boot/efi.

mount /dev/mapper/vgubuntu-root /mnt/nvmeCopy

mount /dev/nvme0n1p2 /mnt/nvme/boot/Copy

mount /dev/nvme0n1p1 /mnt/nvme/boot/efiCopy

Similarly, mount the new drive;

mount /dev/mapper/ubuntuvg-root /mnt/sdb/Copy

mkdir /mnt/sdb/bootCopy

mount /dev/sdb2 /mnt/sdb/boot/Copy

mkdir /mnt/sdb/boot/efiCopy

mount /dev/sdb1 /mnt/sdb/boot/efi/Copy

This is how drives are mounted now!

df -hTCopy

/dev/mapper/vgubuntu-root   ext4     232G  163G   58G  75% /mnt/nvme
/dev/nvme0n1p2              ext4     704M  127M  526M  20% /mnt/nvme/boot
/dev/nvme0n1p1              vfat     511M  6.1M  505M   2% /mnt/nvme/boot/efi
/dev/mapper/ubuntuvg-root   ext4     232G   36K  220G   1% /mnt/sdb
/dev/sdb2                   ext4     974M   28K  907M   1% /mnt/sdb/boot
/dev/sdb1                   vfat     511M  4.0K  511M   1% /mnt/sdb/boot/efi

Clone the Linux OS to new Drive

Now that the partitions are created and mounted, copy the data from the old disk to new disk. To ensure that proper permissions and ownership are retained, use rsync command.

You can exclude unnecessary directories such as /tmp, /proc, /dev, /sys, e.tc

rsync -avhP --exclude={"/dev/*","/proc/*","/sys/*","/tmp/*","/run/*","/mnt/*","/media/*","/lost+found"} /mnt/nvme/ /mnt/sdb/Copy

The rsync options, -avhP used are explained below:

-a: Stands for "archive" and is used to preserve the file attributes and permissions during the synchronization. It's a shorthand for several other flags like -rlptgoD.
-v: Stands for "verbose" and makes rsync display detailed information about the files being copied, which can be helpful for tracking progress.
-h: Stands for "human-readable" and makes the output more easily understandable for humans by using units like "K" (kilobytes), "M" (megabytes), etc.
-P: Combines two options:
- --progress: Displays progress information during the transfer, including the percentage of completion.
- --partial: Allows resuming partially transferred files.

Depending on the size of your data, this may take sometime to complete the copying!

Once the data copying is done, you can confirm drives usage;

du -hs /mnt/sdbCopy

163G	/mnt/sdbCopy

du -hs /mnt/nvme/Copy

163G	/mnt/nvme/Copy

All seems to be good!

Install GRUB Bootloader

Next install the GRUB bootloader on to the new disk. Proceed as follows;

mount --bind /dev /mnt/sdb/devCopy

mount --bind /dev/pts /mnt/sdb/dev/ptsCopy

mount --bind /proc /mnt/sdb/procCopy

mount --rbind /sys /mnt/sdb/sysCopy

If your system was on UEFI, then ensure that you mount the /sys with --rbind option. This enables grub-install command to manipulate the EFI variables.

Chroot into your system disk and install bootloader:

chroot /mnt/sdb/Copy

Run the command below to install GRUB on the specified device's boot sector or EFI System Partition (ESP) if it's an EFI system;

grub-install /dev/sdbCopy

If using GRUB 2, then update the command above accordingly.

Sample output;

Installing for x86_64-efi platform.
Installation finished. No error reported.Copy

If you get the warnings below;

grub-install: warning: EFI variables cannot be set on this system.
grub-install: warning: You will have to complete the GRUB setup manually.Copy

Ensure /sys is mounted with --rbind option.

Verify GRUB installation;

grub-install --recheck /dev/sdbCopy

Update the GRUB configuration to reflect the changes.

update-grubCopy

Update the Filesystem Table (FSTAB)

FSTAB (etc/fstab) defines how storage devices and partitions are mounted into the file system hierarchy at system boot.

First, let's get the old system fstab configurations (note that we are still within chroot!);

grep -vE "^$|^#" etc/fstabCopy

UUID=4713c4fd-460e-4d1f-953e-69c472907234 /               ext4    errors=remount-ro 0       1
UUID=8c32b607-959f-4ba0-859c-047607b8ec89 /boot           ext4    defaults        0       2
UUID=83A8-304C  /boot/efi       vfat    umask=0077      0       1
UUID=620960b0-096e-4384-9217-2c928c9737fe none            swap    sw              0       0

You have to update the device UUIDS to match your new device UUIDS.

You can get UUIDs using blkid command;

blkid | grep -E 'swap|sdb'Copy

/dev/nvme0n1p1: UUID="43C1-9E44" TYPE="vfat" PARTLABEL="primary" PARTUUID="430cc037-97f6-4364-9c84-26ba9f782446"
/dev/nvme0n1p2: UUID="86e7c866-3199-4c5e-90cc-5c162d1f8955" TYPE="ext4" PARTLABEL="primary" PARTUUID="f50ada98-c395-44e5-9b1b-f17576f94e5a"
/dev/nvme0n1p3: UUID="4709471c-9d3a-4d98-8dc5-6247bc31a366" TYPE="crypto_LUKS" PARTLABEL="primary" PARTUUID="db703ec6-4d44-4724-ae47-6792f18aa614"
/dev/mapper/vgubuntu--1-swap_2: UUID="620960b0-096e-4384-9217-2c928c9737fe" TYPE="swap"
/dev/mapper/nvme0n1p3_crypt: UUID="hf1lmF-3qxg-0Leq-hLeW-vFH1-feMa-Q4TAvN" TYPE="LVM2_member"
/dev/mapper/vgubuntu-swap: UUID="41135eca-3e0c-4731-9263-25340f0a7f57" TYPE="swap"

The update fstab as follows.

cat > etc/fstab << 'EOL'
UUID=4709471c-9d3a-4d98-8dc5-6247bc31a366 /               ext4    errors=remount-ro 0       1
UUID=86e7c866-3199-4c5e-90cc-5c162d1f8955 /boot           ext4    defaults        0       2
UUID=43C1-9E44  /boot/efi       vfat    umask=0077      0       1
UUID=41135eca-3e0c-4731-9263-25340f0a7f57 none            swap    sw              0       0
EOL

At this point, you are now almost done.

Update LUKS Crypt Table

LUKS crypt table defines the layout and configuration of a LUKS-encrypted device.

cat etc/crypttabCopy

dm_crypt UUID=4713c4fd-460e-4d1f-953e-69c472907234 none luks,discardCopy

Where:

dm_crypt: This field specifies the name of the mapped device that will be created when the encrypted device is unlocked (/dev/mapper/dm_crypt). In this case, it is set to dm_crypt.
UUID=4713c4fd-460e-4d1f-953e-69c472907234: This field specifies the UUID (Universally Unique Identifier) of the encrypted block device. The UUID is a unique identifier assigned to the underlying block device.
none: The passphrase or key used to unlock the encrypted device. In this case, it is set to none, indicating that the device will prompt for the key.
luks: This field specifies the encryption format or type. In this example, it is set to luks, indicating that the encrypted device is formatted using the LUKS (Linux Unified Key Setup) encryption standard.
discard: This option specifies that the discard operation (TRIM) should be enabled for the encrypted device. TRIM is a feature that allows the operating system to inform the SSD about blocks of data that are no longer in use, helping with performance and wear leveling on SSDs that support this feature.

Get the LUKS device UUID;

cryptsetup luksUUID /dev/sdb3Copy

4709471c-9d3a-4d98-8dc5-6247bc31a366Copy

Update crypt table;

echo "dm_crypt-1 UUID=4709471c-9d3a-4d98-8dc5-6247bc31a366 none luks,discard" > etc/crypttabCopy

Update Initramfs

Regenerate the initramfs to include the changes made to the LUKS-encrypted drive.

update-initramfs -uCopy

Update GRUB