8.1 DFRC系统架构 8.1.1 雷达中心 vs 通信中心设计范式 8.1.2 共享波形与分离波形策略对比 8.1.3 构造性干扰(CI)预编码与多用户MUI管理 8.2 恒模DFRC优化模型 8.2.1 多目标加权求和:通信SINR vs 雷达CRLB 8.2.2 波形相似性与参考波形(LFM/Phase Code)约束 8.2.3 OFDM-Chirp多通道正交信号联合设计 8.3 新兴场景扩展 8.3.1 STAR-RIS辅助的DFRC波形优化 8.3.2 太赫兹(THz)与毫米波大规模MIMO场景 8.3.3 认知雷达(Cognitive Radar)与频谱共存约束
—
相关推荐
iOS反编译-hook微信之艾特所有人
all。
深入解析Unity3D中PostLateUpdate突然占用大量时间的原因
在Unity3D的生命周期中,是一个在LateUpdate之后被调用的方法。它通常用于处理一些需要在所有更新(包括物理更新和动画更新)之后进行的逻辑。由于它在游戏循环的后期阶段被调用,因此它通常用于处理与渲染直接相关的任务,如相机调整、UI更新等。突然占用大量时间的问题可能由多种原因引起,包括复杂的逻辑处理、频繁的资源加载、不恰当的渲染优化、插件或第三方库的副作用以及内存泄漏或垃圾回收等。为了解决这个问题,开发者需要仔细审查和优化中的代码,同时利用Unity提供的工具来监控和分析游戏性能。
硬件单板类机考复习提纲
6、 功率晶体管低导通损耗时处于的状态(饱和状态、放大状态、截止状态)(放大器的采样频率特性)总结:元器件特性(电阻、电容、二极管、三极管、晶体、晶振、MOS、磁珠等)信号质量问题产生根因(单调性、边沿过缓、毛刺、回沟、抖动等)3、 几种电容容量范围大小(超级电容、钽电容、陶瓷电容、铝电容)66、背板连接器接触设计的接触顺序(先导向、再地针、最后信号针)28、逻辑电平接口的特性(CMOS、TTL、ECL、PECL)76、差分电平(lvpecl、RS-422/485、cml)
RandLA-Net复现SemanticKITTI和S3DIS数据集
RandLA-Net复现KITTI和室内数据集
避坑指南:雅特力AT32F403A在Keil5中的V2库配置常见问题解析
本文详细解析了国产MCU雅特力AT32F403A在Keil5中配置V2库的常见问题,包括工程创建、库文件配置、编译错误和外设设置等关键环节。针对项目文件夹结构混乱、芯片型号选择错误、头文件路径设置不当等典型问题提供实用解决方案,帮助开发者高效避坑,提升开发效率。
SXU—软件测试方法和技术-朱少民-第三部分 软件测试方法大题汇总-附考点和相关习题及解答
软件测试方法和技术-朱少民-第三部分 软件测试方法—-最少测试用例个数,强一般弱一般强健壮、边界值分析、ns流程图、白盒逻辑覆盖代码、等价类划分,逻辑组合(条件)覆盖,计算圈复杂度等—附考点和相关习题及解答
ROS从入门到精通2-7:Gazebo仿真之动态生成障碍物
动态生成障碍物在机器人导航、碰撞避障算法测试、多机协同等领域应用广泛,可以帮助开发人员快速测试,本文介绍该技术并提供基于ROS Gazebo的实现
〔重庆理工大学〕计算机网络实验指导书【实验九 直连路由,静态路由,默认路由配置】
本实验指导书介绍了直连路由、静态路由和默认路由的配置方法。主要内容包括:1)路由器基础知识,包括直连路由、静态路由和动态路由三种路由生成方式;2)路由度量值与匹配顺序,解释了不同路由类型的优先级;3)实验任务分为三个部分:直连路由的查看分析、静态路由的配置以及默认路由的配置,详细说明了配置步骤和命令。实验要求通过模拟器搭建网络环境,完成路由配置使PC间能够互通。实验旨在帮助学生掌握不同路由类型的工作原理和配置方法,适用于简单的网络环境。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片
基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正
ssm框架搭建
这个是一个在idea上成功跑起来的ssm框架项目,保存在这里方便以后使用直接下载
lwip-2.0.3
lwip是瑞典计算机科学院(SICS)的Adam Dunkels 开发的一个小型开源的TCP/IP协议栈。实现的重点是在保持TCP协议主要功能的基础上减少对RAM 的占用。
761



被折叠的 条评论
为什么被折叠?



