相关推荐
用Stata复现经典文献:上市公司全要素生产率(TFP)计算全流程(含LP/OP代码解读)
本文提供了使用Stata软件复现上市公司全要素生产率(TFP)计算的完整实战指南。重点解读了主流的Levinsohn-Petrin(LP)和Olley-Pakes(OP)半参数估计方法,通过详细的数据清洗、变量构建与价格平减步骤,手把手演示了如何准确测算TFP,并强调了LP方法在处理中国上市公司数据时的稳定性和适用性。
RK3576开发板ROS2部署实战:从Buildroot配置到Hello World Demo
本文详细介绍了在RK3576开发板上部署ROS2的完整实战流程。从Buildroot工程配置、集成ROS2依赖,到搭建Docker交叉编译环境、处理编译难题,最终完成系统镜像打包并在板端成功运行Talker-Listener Demo。该指南旨在帮助开发者深入理解嵌入式机器人系统的构建链,实现从底层到应用的完全掌控。
【头歌educoder】离散数学实训参考-第二章-关系-part1-关系基础
python实现离散数学-关系基础-二元关系
在Windows11下安装完Ubuntu20.04双系统后配置环境的过程
在Windows11下安装完Ubuntu20.04双系统后配置环境的过程 1.NVIDIA驱动检测及安装 2.Anaconda的安装 3.安装cuda、cudnn、pytorch 4.其他报错
FPGA之串口收发字符串之(四)——串口屏USART_HMI介绍
之前对串口各模块的设计都做了相关介绍。这里介绍串口屏的相关知识。 本次项目使用的串口屏型号是陶晶驰串口屏TJC3224T024_011,这个型号的串口屏的资料在官网可以找到。本文抛转引玉,简单介绍以便在本工程中更好的应用。 下图是该串口屏的实物图: 一般地,使用单片机或者嵌入式MCU控制串口屏,都会用到串口,同样地,在FPGA中实现也是类似,不过稍微复杂,具体代码设计过程中有以下问题需要...
168、OIS光学防抖系统设计:陀螺仪标定、音圈马达驱动与滚珠式/悬丝式结构选型
本文总结了OIS光学防抖系统设计中的关键问题与解决方案。作者通过实际案例指出,陀螺仪标定需重视零偏、灵敏度和温度补偿问题,音圈马达驱动需采用电流环控制并优化相位补偿。在机械结构选型方面,滚珠式适合大角度补偿但存在回差问题,悬丝式精度高但受重力影响,需根据应用场景选择。系统联调建议从开环到闭环逐步验证,注意陀螺仪与驱动频率匹配。最后给出5条经验建议:关注陀螺仪信噪比而非分辨率、预留标定余量、重视机械结构公差、配备专业调试工具、协调OIS与电子防抖的分工配合。文章强调OIS调试需针对不同模组特性进行反复测试与标
使用MATLAB求解二维顶盖驱动流问题的详细代码和说明
本文介绍了使用MATLAB求解二维顶盖驱动流问题的涡量-流函数方法。代码采用129×129网格,雷诺数Re=1000,通过迭代求解Navier-Stokes方程,包含流函数方程和涡量输运方程的离散求解。程序实现了边界条件处理、收敛性检查,并提供丰富后处理功能:流线图、涡量分布图、中心线速度曲线、矢量图和三维涡量可视化。计算结果可与Ghia等(1982)的经典数据进行验证。该代码完整展示了CFD问题的数值求解流程,包括参数设置、主循环计算和多种结果呈现方式,适用于流体力学教学和科研验证。
智能手表PCB布局:PPG与IMU传感器噪声隔离与应力解耦设计
在可穿戴设备硬件开发中,PCB布局已超越传统布线范畴,成为决定信号完整性、电磁兼容性与机械可靠性的核心环节。心率传感器(PPG)依赖微伏级光电容积脉搏波信号,极易受数字开关噪声与电源纹波干扰;姿态传感器(IMU)则对PCB弯曲形变引发的机械应力高度敏感。其布局需融合电磁场建模、热-力-电多物理协同及高密度互连约束。关键技术价值体现在噪声路径切断、地弹抑制、应力方向解耦与电源域隔离等工程实践。典型应用场景涵盖智能手表、医疗级贴片设备及微型运动传感终端。本文聚焦PPG与IMU两大模组在STM32L4平台上的实操
假人有限元模型
假人模型,车辆碰撞假人有限元模型,适合做乘员安全的研究者利用
廖雪峰Python教程[完整版]
廖雪峰的python教程整理的,已经排好版了,而且还是完整的,适合小白
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
蓝牙模块HM-10手册
蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。
订阅专栏 解锁全文
596



被折叠的 条评论
为什么被折叠?



