墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
200+累计阅读
248平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
MTD（Memory Technology Device）是Linux内核中用于管理嵌入式设备上非易失性存储器的子系统。其中，NAND Flash是一种常见的非易失性存储器类型，被广泛应用于嵌入式系统中。本文将详细介绍MTD设备驱动和NAND Flash驱动程序的分析和编程方法，并提供相应的源代码。
下面是一个简单的MTD设备驱动示例代码：
#include <linux/module.h>
#include <linux/mtd/mtd.h>
stati第19章Flash设备驱动之Linux Flash驱动结构
本章重点 Flash 在嵌入式系统中必不可少，Flash是 BootLoader、Linux 内核和文件系统的最佳载体。在 Linux 内核中，引入 MTD（内存技术设备） 层为 NOR Flash 和NAND Flash 设备提供统一的接口，使得 Flash 驱动的设计工作大为简化。 1、 Linux Flash 驱动的结构，主要讲解MTD 系统的层次结构和接口。 2、讲解NO...
Linux MTD子系统(一)
MTD（Memory Technology Device)子系统（代表内存技术设备）为原始闪存设备提供了一个抽象层。 当使用不同的闪存类型和技术（例如NAND，OneNAND，NOR 等）时，可以使用相同的API。
立创开源TinyAWG：基于ZYNQ7010的35MHz带宽200MSa/s任意波形发生器设计与实现
本文详细解析了立创开源TinyAWG的设计与实现，这是一款基于ZYNQ7010芯片的低成本高性能任意波形发生器。项目实现了35MHz带宽和200MSa/s采样率，核心采用ARM+FPGA协同架构，FPGA负责高速DDS信号生成，ARM运行Linux并搭载LVGL图形界面。文章涵盖了硬件选型、电路设计、软件逻辑及性能测试，为复刻和学习ZYNQ系统设计、高速DAC应用提供了完整参考。
解析vCard 3.0：提取电子名片中的姓名
N:LastName;FirstName;;;END:VCARD和END:VCARD标记数据块的开始和结束。N字段存储结构化姓名（分号分隔）。FN字段为直接可读的显示名称。其他字段如TELEMAIL等保存联系信息。
N32G003学习——第九章 第三节1 串口 发送
经过第九章前2节的学习，基础打下之后，开始敲代码。
AD/Protel老手才知道的PCB过孔查看技巧：3分钟分清通孔、盲孔和埋孔
本文为PCB设计工程师提供了在Altium Designer/Protel中快速鉴别通孔、盲孔和埋孔的实用技巧。通过层叠管理器、高级筛选工具和实战五步法，帮助用户在3分钟内精准识别过孔类型，提升设计效率和电路性能。特别适合处理高密度HDI板卡中的复杂过孔布局。
无人机频谱侦测与智能识别技术实战解析
本文深入解析无人机频谱侦测与智能识别技术实战应用，涵盖无线电侦测、信号处理和定位技术等核心内容。通过频谱分析、特征提取和机器学习算法优化，实现高精度无人机识别与定位，并分享复杂环境下的应对策略和系统集成经验。
WQ7033开发指南（应用篇）之2.1 主函数详解（1）
整个系列文章查看： WQ7033开发指南汇总 目录 1.函数模块位置 2.函数main_chip_init（）解析 2.1 cal_data_ana_load（） 2.2 函数iot_cache_restore_register()解析 3.函数iot_soc_chip_init()解析 3.1 soc芯片初始化的低功耗使能 3.2 分支预设功能使能 3.3 数据异常中止使能 3.4 外围低速总线访问路径使能 3.5 1.8V DCDC功能配置 3.6 ADC配..
20-CUDA规约算法：并行求和优化策略-✨
本文介绍了GPU上高效并行规约(Reduction)算法的优化技巧。规约是将大量数据合并为单个值的基础计算模式，广泛应用于科学计算等领域。文章从基础并行规约实现出发，逐步讲解了三种关键优化策略：1)交错寻址减少共享内存bank冲突；2)循环展开降低分支预测开销；3)多级规约处理大规模数据。性能对比显示，优化策略可带来最高4.5倍的加速效果。最后总结了最佳实践，包括合理使用共享内存、循环展开和warp级优化等技巧。这些优化方法可显著提升GPU计算密集型应用的性能。
基于深度学习YOLOv8的花卉检测与识别系统（附完整资源+PySide6界面+训练代码）
通过本项目，我们成功实现了基于YOLOv8的花卉检测与识别系统，涵盖了数据预处理、模型训练、推理与实时检测、以及GUI界面的实现。YOLOv8在花卉检测中的高效性和准确性为实际应用提供了强有力的支持。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
C# WinForm 基于DirectShow.dll编写的程序，可边预览边保存视频，音频和图片
基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择（默认选中第一个）2.可录制wmv和avi两种格式的视频并且都带有音频，avi可以录制的分辨率和帧数进行选择，wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照，也可边录制视频边拍照4.添加了视频和音频的压缩功能（酌情使用）这次二次开发发现C#对DirectShow的相关信息太少，这次做完也不敢藏私共享出来，还望大家指正
TMS_WebGMaps_1.9.8.0_Full_Source
TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder
数学建模模型总结
这是本人在两年内准备参加数学建模竞赛搜集到的模型资料，已经经过了本人的筛选和整理，希望能够对准备参加数学建模竞赛的学弟学妹们提供一些帮助！
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
3018
扫一扫
