paper refs

D. Van Aken, A. Pavlo, G. J. Gordon, and B. Zhang.
Automatic database management system tuning
through large-scale machine learning. In Proceedings
of the 2017 ACM International Conference on
Management of Data, SIGMOD ’17, pages 1009–1024,
New York, NY, USA, 2017. ACM.

{LAMA}: Optimized Locality-aware Memory Allocation for Key-value Cache
X Hu, X Wang, Y Li, L Zhou, Y Luo, C Ding… - 2015 USENIX ATC

zExpander: a key-value cache with both high performance and fewer misses
Xingbo Wu, Li Zhang, Yandong Wang, Yufei Ren, Michel Hack, Song Jiang
Eurosys’16

Efficient In-memory Data Management: An Analysis
Hao Zhang, Bogdan M. Tudor, Gang Chen, Beng Chin Ooi,
Proceedings of the VLDB Endowment, Vol. 7, No. 10, 2014

内容概要:本文介绍了奕斯伟科技集团基于RISC-V架构开发的EAM2011芯片及其应用研究。EAM2011是一款高性能实时控制芯片,支持160MHz主频和AI算法,符合汽车电子AEC-Q100 Grade 2和ASIL-B安全标准。文章详细描述了芯片的关键特性、配套软件开发套件(SDK)和集成开发环境(IDE),以及基于该芯片的ESWINEBP3901开发板的硬件资源和接口配置。文中提供了详细的代码示例,涵盖时钟配置、GPIO控制、ADC采样、CAN通信、PWM输出及RTOS任务创建等功能实现。此外,还介绍了硬件申领流程、技术资料获取渠道及开发建议,帮助开发者高效启动基于EAM2011芯片的开发工作。 适合人群:具备嵌入式系统开发经验的研发人员,特别是对RISC-V架构感兴趣的工程师和技术爱好者。 使用场景及目标:①了解EAM2011芯片的特性和应用场景,如智能汽车、智能家居和工业控制;②掌握基于EAM2011芯片的开发板和芯片的硬件资源和接口配置;③学习如何实现基本的外设驱动,如GPIO、ADC、CAN、PWM等;④通过RTOS任务创建示例,理解多任务处理和实时系统的实现。 其他说明:开发者可以根据实际需求扩展这些基础功能。建议优先掌握《EAM2011参考手册》中的关键外设寄存器配置方法,这对底层驱动开发至关重要。同时,注意硬件申领的时效性和替代方案,确保开发工作的顺利进行。
\renewcommand{\thefigure}{S\arabic{figure}} \setcounter{figure}{0} % 可选:若你是从 Figure S1 开始 \appendix \section{Appendix} The supplementary information lists the figures supplemented in the paper, as shown in Figs. S1-S16. \begin{figure}[ht!] \centering % Out-strength 子图组 \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2005-2006+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2006-2007+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2007-2008+-1_out_top10.png} \end{minipage} \vspace{10pt} % 行间距调整 \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2008-2009+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2009-2010+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2010-2011+-1_out_top10.png} \end{minipage} \vspace{10pt} \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2011-2012+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2012-2013+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2013-2014+-1_out_top10.png} \end{minipage} \vspace{10pt} \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2014-2015+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2015-2016+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2016-2017+-1_out_top10.png} \end{minipage} \vspace{10pt} \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2017-2018+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2018-2019+-1_out_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2019-2020+-1_out_top10.png} \end{minipage} \caption{Distribution of grid points with top 10 out-strength on the map in different years.} \label{figS1} \end{figure} \begin{figure}[ht!] \centering % In-strength 子图组 \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2005-2006+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2006-2007+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2007-2008+-1_in_top10.png} \end{minipage} \vspace{10pt} % 行间距调整 \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2008-2009+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2009-2010+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2010-2011+-1_in_top10.png} \end{minipage} \vspace{10pt} \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2011-2012+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2012-2013+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2013-2014+-1_in_top10.png} \end{minipage} \vspace{10pt} \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2014-2015+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2015-2016+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2016-2017+-1_in_top10.png} \end{minipage} \vspace{10pt} \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2017-2018+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2018-2019+-1_in_top10.png} \end{minipage}\hfill \begin{minipage}[t]{0.32\textwidth} \centering \includegraphics[width=\textwidth]{2019-2020+-1_in_top10.png} \end{minipage} \caption{Distribution of grid points with top 10 in-strength on the map in different years.} \label{figS2} \end{figure} \printcredits %% Loading bibliography style file %\bibliographystyle{model1-num-names} \bibliographystyle{cas-model2-names} % Loading bibliography database \bibliography{cas-refs} 我希望参考文献的输出,在图全部出现完毕之后,而不是参考文献穿插在附录的图的中间,最好不要用分页,我想的是附录的图全部出现完之后,参考文献跟在后面
05-14
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值