【原创】UCOS-ii+LWIP之DHCP功能添加

lwip源码分析 之 DHCP协议实现(一) 文章目录一,dhcp协议简介二,源码解析2.1 dhcp结构体2.2 开始广播2.3 回调接口 一,dhcp协议简介 dhcp协议是动态主机配置协议,是互联网的基本协议。lwip内核也实现了该协议。关于lwip协议的具体内容,请先转到:https://blog.youkuaiyun.com/lm409/article/details/80298225 lwip实现dhcp的代码在core/dhcp.c中。 二,源码解析 应用程序要使用dhcp协议,只需要在代码中调用: err_t dhcp_start(struct 阅读详情

网友jyx0928提出来有关lwip的dhcp的功能,今天上午写了一个简单的添加过程,我把代码贴出来。希望能给予你一定的帮助。由于公司网络的原因,未能进行dhcp功能的测试。如果代码有何问题,欢迎继续讨论。

struct ip_addr  IpAddr, NetMask, Gateway;
static struct netif EMACNetif;
 
#if LWIP_DHCP
 INT16U  i,j;
 INT8S  result;
 INT16U  cnt;

 for(i=0; i<5; i++) {
  LWIP_DEBUGF(DHCP_DEBUG | DBG_TRACE | DBG_STATE, ("Start DHCP Request!!\r\n"));
  result = dhcp_start(&EMACNetif);
  IP4_ADDR(&IpAddr,0,0,0,0);
  for(cnt=0; (cnt<10) && (IpAddr.addr == 0); cnt++) {
   IpAddr.addr = EMACNetif.ip_addr.addr;
   //for(j=0;j<100000;j++);
   OSTimeDlyHMSM(0,0,1,0);
  }
  dhcp_stop(&EMACNetif);
  if(IpAddr.addr != 0) {
   LWIP_DEBUGF(DHCP_DEBUG | DBG_TRACE | DBG_STATE, ("Start DHCP Request *** OK *** \r\n"));
   break;
  }
 }
 
 IpAddr.addr  = EMACNetif.ip_addr.addr;
 Gateway.addr = EMACNetif.gw.addr;
 NetMask.addr = EMACNetif.netmask.addr;
#endif
 netif_add(&EMACNetif, &IpAddr, &NetMask, &Gateway, NULL, ethernetif_init, tcpip_input);
 netif_set_default(&EMACNetif);
 netif_set_up(&EMACNetif);

LWIP与UCOS-II在STM32F4上的嵌入式网络移植实战 嵌入式网络协议栈是物联网终端实现TCP/IP通信的核心基础。其本质是在资源受限的MCU上,通过操作系统协调内存、中断、任务与时间片,构建可靠的网络数据通路。LWIP作为轻量级TCP/IP协议栈,依赖RTOS提供线程调度、信号量同步和消息队列等抽象服务;UCOS-II则以确定性调度、成熟移植生态和教科书级文档支撑,成为STM32F4等Cortex-M4平台的理想选择。该组合广泛应用于工业网关、智能仪表与边缘设备中,支撑Modbus TCP、HTTP服务器及远程固件升级等关键场景。 阅读详情

相关推荐

移植 LWIP 1.4.1 到 ucosii 的总结

1 下载LwIP 很简单,到LwIP的官方网站即可:http://savannah.nongnu.org/projects/lwip/。如果你不想看看其它内容(可能对你会很重要),就只是想得到源码,好的,直接到这个地址下载:http://download.savannah.nongnu.org/releases/lwip/。目前官方发布的最新版本是1.1.1,找到lwip-1.1.1.zip,然

since_2000的博客 5520

stm32 lwip的DHCP

stm32f107 lwip dhcp 第一篇        DHCP自动获取功能的实现 概要   DHCP在电脑中经常用到,因为我们并不关心我们电脑的IP是多少 只要能连上网络就行了。在嵌入式的产品设备中,DHCP用到的比较少,因为很多的操作是通过ip来进行的。除非那种有服务器的系统设备会用到。这里我们只能简单说一下流程,设计的代码太多了,具体的需要学习者自己去慢慢研究。 dhcp模块:

ZYX的专栏 7635

stm32 lwip DNS DHCP ucosIII TCP Client 原创程序

主控芯片stm32 采用lwip协议栈实现 DNS DHCP TCP Client 跑的ucosIII 另有USART1 DMA发送 中断接受

lwip---DHCP

LwIP DHCP流程: 1: netif_add: dhcpif  设为全0  netif_set_default  netif_set_up 2: dhcp_start 3: dhcpif->ip_addr.addr 该值不为0则说明取得到IP        此时需要保存IP, Mask, GateWay, 否则在以下部操作之后就没了  dhcp_release   释放DHCP

学海无涯,回头是岸........ 1万+

UCOS_LWIP_DHCP_netconn

UCOS_LWIP_DHCP_netconn,LWIP DHCP UCOS ENC28J60 STM32 NETCONN,使用netconn接口,非raw模式,stm32主控芯片

LWIP_UCOS2.91_DHCP_UDP_NETCONN

LWIP_UCOS2.91_DHCP_UDP_NETCONN,主控STM32F103,网卡enc28j60

实现lwip的DHCP自动获取ip地址

实现lwip的DHCP自动获取ip地址  [转载]        上个星期,在LM3S系列移植的lwip上,实现了自动获取ip的功能。         实现过程是:1)在opt.h上使能#define LWIP_ARP 1和#define LWIP_DHCP 1;2)在lwipopts.h上使能#define LWIP_DHCP  1 和 #define DHCP_DOES_ARP_CHECK

笔记 4699

stm32移植LWIP协议并验证DHCP功能

在stm32f103zet6上移植了lwip协议,并验证了DHCP功能。

LWIP 实现DHCP及DNS功能

一、实现DHCP 1、定义#define LWIP_DHCP                       1 2、调用dhcp_start(&enc28j60_netif); 启动DHCP 3、检测DHCP是否成功 4、在while中调用sys_check_timeouts();函数处理内核各种定时事件(1.4.1中才有这个函数,之前版本没有) 5、实验结果(确保路由具有

面朝大海春暖花开 1万+

利用GeoTools高效切割GeoTIFF为WebP瓦片:从配置到实战

本文详细介绍了如何利用GeoTools将GeoTIFF高效切割为WebP瓦片,从环境配置到实战技巧全面覆盖。通过对比WebP与PNG格式的优势,展示其在体积压缩和传输效率上的显著提升,并提供多线程切割、内存管理等性能优化方案,帮助开发者快速实现地理空间数据的Web地图服务部署。

agile9scrum的博客 815

Android中的Service:Binder,Messenger,AIDL(2)

前言前面一篇博文介绍了关于Service的一些基本知识,包括service是什么,怎么创建一个service,创建了一个service之后如何启动它等等。在这一篇博文里有一些需要前一篇铺垫的东西,建议没有看过前一篇博文的同学先去看一下前一篇: Android中的Service:默默的奉献者 (1) 。但是在前一篇博文中也有一些遗漏的东西——主要是关于bindService()这一块的具体细节。由于这

lypeer的专栏 5万+

ucos上封装linux接口的系统函数,ucos/lwip移植心得

ucos/lwip移植心得2007-09-12 16:01经过几天调试除掉几个bug以后,ucos+lwip在我的44b0+8019开发板上终于跑得比较稳定了.一只觉得lwip是一个不错的开放源码的tcp/ip协议栈,想把自己对lwip的移植和理解写出来.但是由于最近比较忙,lwip的移植也是利用业余时间做的,今天写好了第一部分(lwip的processmodel)先贴上来,如果大家有兴趣我再接...

weixin_42511201的博客 626

基于计算机视觉的Windows自动化工具openclaw-win:从原理到实战

计算机视觉与自动化技术正深刻改变人机交互方式,其核心在于让机器具备“感知-决策-执行”的能力。通过图像采集与处理算法,程序可以识别屏幕上的特定元素;结合模拟输入技术,便能自动执行点击、拖拽等操作,形成完整的自动化闭环。这一技术栈在软件测试、数据采集、重复性办公任务等领域具有重要价值,能够显著提升工作效率。开源项目openclaw-win正是这一理念的工程实践,它整合了图像识别与模拟操作模块,为开发者提供了一个研究自动化技术的具体样本。项目涉及模板匹配、坐标计算等关键技术点,并需处理屏幕适配、操作延迟等实际问

weixin_28745975的博客 334

STM32F4XX LWIP+freeRTOS移植(二)

STM32F4XX LWIP+freeRTOS移植(二) 2018年08月06日 15:07:12苏守坤阅读数:1716 有疑问请加扣扣技术交流群:460189483 源码下载地址:https://download.youkuaiyun.com/download/u014453443/10698059 前面几个文件改好了之后,下面进入实战环节,从ucos_ii系统+lwip移植为freeRTOS+...

zhjmyx的专栏 1873

Android Camera性能优化概述

做camera性能优化方面的工作有几年了,想写一篇文章简单介绍一下其中涉及到的具体技术,这篇文章会大概介绍一下涉及到的技术。

weixin_42136255的博客 4027

7段数码管驱动电路设计

7段数码管驱动电路设计

好好学习,天天向上 9755

LWIP总结

https://www.cnblogs.com/wilyas/p/5303019.htmlLWIP总结介绍    Lwip,light weight IP;是由Adam Dunkels 开发的一个小型开源的TCP/IP协议栈;目前已经为全球共同开发的开源协议;支持TCPIP协议族的核心协议;包括:ARP/ICMP/TCP/UDP/IPV4/IPV6/DHCP等;其核心特点是:功能齐全、运行需求的R...

ysh1042436059的专栏 1260

流体动力学仿真软件:Star-CCM+_(15).用户自定义函数与模型

用户自定义函数(User-Defined Functions, UDFs)允许用户编写自己的函数,并在仿真中调用这些函数。UDFs可以用于定义复杂的边界条件、源项、材料属性等。Star-CCM+支持多种编程语言,包括C++、Fortran和Java等,其中最常用的语言是Java。用户自定义模型(User-Defined Models, UDMs)允许用户在仿真中引入自定义的物理模型。这些模型可以用于描述流体行为、化学反应、多相流等复杂现象。Star-CCM+提供了丰富的API来支持UDMs的开发。

kkchenjj的博客 557

lwIP分析

功能: LwIP的特性如下: (1)支持多网络接口下的IP转发 (2)支持ICMP协议 (3)包括实验性扩展的的UDP(用户数据报协议) (4)包括阻塞控制,RTT估算和快速恢复和快速转发的TCP(传输控制协议) (5)提供专门的内部回调接口(Raw API)用于提高应用程序性能 ...

chenghuang4575的博客 857

从零玩转Vitis裸机开发:手把手教你创建、移植与实战优化

✅ Vitis裸机开发全流程✅ 中断系统配置技巧✅ 跨平台移植方法论✅ 性能优化实战经验研究FreeRTOS移植探索AMP(非对称多处理)架构学习使用Vitis Analyzer进行性能分析技术雷达:关注Xilinx最新推出的Vitis Unified IDE,其集成了更强大的调试和分析工具。立即动手实践吧!

QQ_778132974的博客 584

液滴碰撞壁面的过程背景论文——bouncing反弹,spreading扩展,splashing飞溅。铺展过程介绍。还存在很多未解之谜。

【1993-德国-Phenomena of liquid drop impact on solid and liquid surfaces】液滴碰撞壁面的过程背景——bouncing反弹,spreading扩展,splashing飞溅。还存在很多未解之谜。还存在很多未解之谜。不同液滴形状碰撞过程。

qq_15963745的博客 200

STM32F4XX LWIP+freeRTOS移植(一)

有疑问请加扣扣技术交流群:460189483 源码下载地址:https://download.youkuaiyun.com/download/u014453443/10698059 STM32F407+FreeRTOS+LAN8720+LWIP1.4.1+DHCP+UDP+标准库+MDK5 TM32F429IGT6原子开发板进行验证的,PHY芯片为LAN8720 原子哥的程序都是ucos_ii+lwip的工程,没有freeRTOS+lwip的工程,这里对比二种系统的差异,来进行lwip的freeRTOS的移植 LWIP

weixin_40333655的博客 682

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

STM32F103上LwIP与μC/OS-II协同移植实战

嵌入式网络协议栈是物联网终端实现可靠通信的基础能力,其中TCP/IP协议栈与实时操作系统(RTOS)的协同集成,直接决定系统实时性、稳定性与可扩展性。LwIP作为轻量级开源TCP/IP协议栈,因其模块化设计和OS抽象层(sys_arch)机制,成为STM32等资源受限MCU的首选;而μC/OS-II凭借确定性调度、成熟ARM Cortex-M3移植支持及丰富内核对象(信号量、消息队列),为LwIP提供理想的运行时环境。二者结合的技术价值在于:既保留裸机级资源效率,又获得多任务隔离、并发安全与高级网络API(

pink7的博客 638

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

STM32F4Ucosii环境LWIP移植

移植平台使用STM32F407为核心芯片的正点原子开发平台,网络芯片使用LAN8720。LWIP使用官方1.4.1版本。本文章只说移植,详细说明请参考正点原子《STM32F4 LWIP开发手册》 1、修改lwipopt.h文件 添加系统优先级代码 //线程优先级 #ifndef TCPIP_THREAD_PRIO #define TCPIP_THREAD_PRIO 5 //定义内核任务的优先级为...

qq_37016048的博客 2175
上一篇: 【原创】LWIP技术--->答网友问081208
下一篇: 【原创】u-boot移植-->连载一
SmallBox00
博客等级 码龄20年 61粉丝 307原创
评论 16
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值