git clone时报RPC failed; curl 18 transfer closed with outstanding read data remaining 错误

最新推荐文章于 2024-05-28 13:30:11 发布
最新推荐文章于 2024-05-28 13:30:11 发布
阅读量247 收藏
点赞数
分类专栏： 其他
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/Roselane_Begger/article/details/103544461
版权
本文介绍了一种常见的Git操作中遇到的问题——RPC failed错误，通常伴随curl 18 transfer closed without standing read data remaining提示。文章提供了有效的解决方法，通过调整Git的网络配置参数，即设置http.lowSpeedLimit为0和http.lowSpeedTime为999999，来应对因网络下载速度慢导致的错误。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

git clone时报RPC failed; curl 18 transfer closed with outstanding read data remaining 错误

可能是因为网络下载速度缓慢

解决方法：命令行输入

git config --global http.lowSpeedLimit 0
git config --global http.lowSpeedTime 999999
error: RPC failed； curl 18 transfer closed with outstanding read data remaining
闫瑞锋的博客
10-07 2395
$ git clone http://github.com/large-repository --depth 1 $ cd large-repository $ git fetch --unshallow 链接问题
git clone 报错 RPC failed； curl 18 transfer closed with outstanding read data remaining
诗渊的博客
08-06 3749
今天在 clone 一个gitlab 项目时，一直报错： remote: Counting objects: 835, done. error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly MiB | 18.35 MiB/s fatal: early EOF; 87%(727/835), 297.93 MiB | 18.3
Git 报错：git - error: RPC failed; curl 18 transfer closed with outstanding read data remaining 解决方案...
weixin_34413065的博客
01-24 233
error: RPC failed; curl 18 transfer closed with outstanding read data remaining because have error when clone by HTTP protocol (curl command). And, you should increment buffer size: git config --globa...
error: RPC failed; curl 18 transfer closed with outstanding read data remaining
wqqGo的博客
02-22 5697
error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed 说明pull的文件过大,需要增大缓存 执行以下操作: git conf...
git clone时RPC failed； curl 18 transfer closed with outstanding read data remaining
最新发布
狼魂之力
05-28 7146
可以根据自己需要下载的文件大小，将postBuffer值配置成合适的大小。1，原因是因为curl的postBuffer的默认值太小，我们需要调整它的大小，在终端重新配置大小。进入指定位置打开公钥文件，打开复制内容粘贴到gitlab的ssh配置页面。2，执行上面命令如果依旧clone失败，考虑可能原因2：网络下载速度缓慢。3，如果依旧clone失败，则首先浅层clone，然后更新远程库到本地。保存，完成，再次通过git bash窗口clone项目即可。解决方法：命令行输入。解决方法：命令行输入。
Git报错：RPC failed; curl 18 transfer closed with outstanding read data remaining
01-07
curl 18 transfer closed with outstanding read data remaining 在度娘上找到的方法都是说是：缓存区溢出，只要加大缓存区就可以了，然后跟着网上的说法一顿操作，结果发现依然是这个问题。 网上的教程是使用下面...
git clone报错 error: curl 18 transfer closed with outstanding read data remaining
Ryze
06-21 535
报错信息 描述 Cloning into 'geektime-ELK'... remote: Enumerating objects: 6, done. remote: Counting objects: 100% (6/6), done. remote: Compressing objects: 100% (5/5), done. error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal:
git clone error:RPC failed； curl 18 transfer closed with outstanding read data remaining
PHY1161460191的博客
03-19 6731
原因：目标仓库文件目录太大，curl的postBuffer默认值太小， 方案一：设置缓冲区大小 git config --global http.postBuffer 524288000 #（单位B：约500M） 方案二：设置深度为1 --depth 1 git clone http://192.168.290.10/CI_AT/Mock_InterfaceTesting.git...
git clone时出现error: RPC failed; curl 18 transfer closed with outstanding read data remaining
拾年一剑 的专栏
05-01 1191
解决git clone时遇到的问题：RPC failed; curl 18 transfer closed with outstanding read data remaining
Git修改缓存大小之后报错：error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal:
fuwugui的博客
03-24 720
前言： 使用Git克隆项目/文件时先报错： error: RPC failed; curl 56 GnuTLS recv error (-54): Error in the pull function. fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed 注：按照本人另一片博客解...
git克隆报错：error: RPC failed； curl 18 transfer closed with outstanding read data remaining
weixin_51972740的博客
01-19 322
git克隆报错：error: RPC failed; curl 18 transfer closed with outstanding read data remaining 错误：RPC失败；curl 58传输关闭，剩余未读数据 此错误是因为在通过HTTP协议克隆（curl命令）时出错。 并且，您应该增加缓冲区大小，执行以下命令 git config --global http.postBuffer 524288000 如果还出现以上错误，可能是因为文件过大或者过多而造成。所以需要执行两个步骤： 一.
git clone出错：error: RPC failed; curl 18 transfer closed with outstanding read data remaining
jhyHenry
10-10 4337
最近遇到git拉取项目出错： remote: Counting objects: 182, done. remote: Compressing objects: 100% (149/149), done. error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal:
Git 报错：git - error: RPC failed； curl 18 transfer closed with outstanding read data remaining 解决方案
wangchaoqi1985的博客
11-14 630
Git 报错：git - error: RPC failed; curl 18 transfer closed with outstanding read data remaining 解决方案
git clone时RPC failed; curl 18 transfer closed with outstanding read data remaining
Maestro_T的博客
04-10 393
git clone项目报错的一些解决办法。 具体报错内容如下： Clone failed early EOF The remote end hung up unexpectedly index-pack failed RPC failed; curl 18 transfer closed with outstanding read data remaining 一般是repo比较大，并且clon...
error: RPC failed； curl 18 transfer closed with outstanding read data remainingfetch 解决办法
很久以前
03-19 277
$ git clone --depth 1 仓库地址 $ git remote set-branches origin ‘你想拉取的分支名称’ $ git fetch --depth 1 origin 你想拉取的分支名称’ $ git checkout 你想拉取的分支名称’
error: RPC failed； curl 18 transfer closed with outstanding read data remaining的解决
达拉崩巴斑得贝迪卜多比鲁翁_
05-13 875
一、加大缓存区 git config --global http.postBuffer 524288000 这个大约是500M 二、少clone一些，–depth 1 git clone https://github.com/flutter/flutter.git --depth 1 –depth 1 –depth 1的含义是复制深度为1，就是每个文件只取最近一次提交，不是整个历史版本。 三、换协议 clone http方式换成SSH的方式，即 https:// 改为 git:// 例如git cl.
git Error RPC failed; curl 18 transfer closed with outstanding read data remaining
07-27
curl 18 transfer closed with outstanding read data remaining"错误时，这通常是由于网络问题引起的。有几种解决方案可以尝试解决这个问题。首先，你可以尝试通过设置Git的低速限制和低速时间来解决问题，使用...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值