墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
500+累计阅读
559平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
“”"
实参角度：
1.位置参数，按照顺序一一对应 (a,b,c)对应(1,2,3)
2.关键字参数，一一对应，不用顺序 (a,b,c)对应(a=1,b=2,c=3)
3.混合参数：位置参数一定要在关键字参数之前 (a,b,c)对应(1,c=3,b=2)
形参角度：
1.与实参角度的位置参数是一种
2.默认参数：（a,b,mode = “r”）
普遍的经常使用的
3.万能参数
4.*的魔性用法
5.极限关键字参数（了解）
6.形参的最终顺序
return：可返回多个值，以元组形式返回
“”"
函数要留有修改的接口，源码一般不改变，需要一种形参可以接受所有的实参，所以出现了*args、**kwargs
*args
**kwargs
形参的顺序：位置参数，*args,默认参数，仅限关键字参数，**kargs
**在函数的调用时，代表打散
SiC MOSFET驱动设计实战：从特性解析到电路优化
本文深入解析SiC MOSFET的核心特性及其驱动电路设计要点，涵盖高温稳定性、快速开关能力等关键特性，并提供驱动电压配置、电流能力计算、布局优化等实用方案。特别针对第三代电力电子半导体SiC MOSFET的驱动要求，分享STGAP1AS等典型驱动方案的应用技巧，助力工程师解决高频应用中的EMI和热管理挑战。
SECS/GEM EAP 设备自动化功能原理和设计方案
半导体SECS GEMEAP实现了对生产线上机台的实时监控，是工厂自动化不可缺少的控制系统。EAP系统与FAB中的机台紧密相关，系统的设计与开发必须与生产线的机台实际生产流程相一致，才能达到控制机台生产的目的。 EAP SECS/GEM是MES与设备的桥梁，EAP通过SECS国际标准协议与机台进行数据传输。SECS是半导体设备（半导体行业称设备为机台）必须遵循的一种国际通信协议。EAP就是通过SECS与设备通信、传输数据、发送指令控制设备按照预先定义........
集成电路设计笔记（七）UVLO设计
1. 什么是UVLO 欠压锁定（Undervoltage-Lockout）简称UVLO，是电子设备中在电源电压低于正常工程准位时，切断电源的电路。在嵌入式系统中常会用UVLO监控电池电压，若电压低于一定值，会直接切断电源，保护嵌入式系统的电路。 许多电子设备中都有UVLO的功能，例如在镇流器中就有UVLO电路，若电压过低时直接切断电源。 UVLO就是低电压锁定； 低压关断. 欠压关断模式是当供电电压低于IC的开启门限电压时的一种保护模式。欠压关断模式可保证IC在供电电压不足时不致于被损坏。一个低电压锁定（
【大二组培训】2017年电子设计大赛H题总结（软件部分）
文章目录前言一、pandas是什么？二、使用步骤1.引入库2.读入数据总结 前言 例如：随着人工智能的不断发展，机器学习这门技术也越来越重要，很多人都开启了学习机器学习，本文就介绍了机器学习的基础内容。 一、pandas是什么？ 示例：pandas 是基于NumPy 的一种工具，该工具是为了解决数据分析任务而创建的。 二、使用步骤 1.引入库 代码如下（示例）： import numpy as np import pandas as pd import matplotlib.pyplot as plt im
YOLO11优化：TGRS2026 CKConv结合C3k2 | 方向特征与跨阶段融合协同，小目标漏检率大幅下降
多尺度适配小目标尺寸变化：在 C3k2 不同阶段配置 CKConv 不同核尺度（浅层小核捕获精细纹理，深层大核聚合上下文），兼顾局部细节与全局感知，提升对舰船、车辆等小尺寸目标及红外热目标的检测鲁棒性。
Qt C++ 信号发生器控制软件
waveformComboBox->addItems({"正弦波", "方波", "三角波", "锯齿波", "脉冲波"});frequencyLabel = new QLabel("频率 (Hz):");amplitudeLabel = new QLabel("幅值 (V):");offsetLabel = new QLabel("直流偏移 (V):");} else if (currentWaveform == "三角波") {} else if (currentWaveform == "方波") {
【深度学习】Progressive Distillation for Fast Sampling of Diffusion Models
这种方法通过迭代地将一个需要较多步骤的模型（称为教师模型）蒸馏成一个需要较少步骤的学生模型，每次迭代都将采样步骤减半，直到达到所需的采样步骤数量。通过渐进式蒸馏,论文将原始需要8192步采样的模型成功蒸馏为只需4步采样就能取得接近的生成质量的新模型,大幅提高了扩散模型的推理效率。这篇论文提出了一种"渐进式蒸馏"(Progressive Distillation)的方法,来大幅降低用于生成对抗网络(GAN)的扩散模型(Diffusion Model)在推理阶段的采样步数,从而提高其推理效率。
【OpenClaw从入门到精通】第60篇：多智能体协同实战——用“龙虾”搭建你的数字员工团队（2026企业版）
2026年AI Agent企业落地的核心趋势，正从“单Agent单兵作战”转向“多智能体协同组网”。本文以全球开发者先锋大会“百虾大战”真实案例为蓝本，深度拆解OpenClaw多智能体协同的技术内核——三层解耦架构（模型层-技能层-网关层），系统搭建包含项目经理、架构师、执行者、质量把关者的4大核心Agent团队。通过三种主流协作架构对比、全链路配置代码实操、故障自愈实战演练，结合电商新品上架虚拟场景全流程演示，解决企业多Agent部署中的权限隔离、任务协同、运维自治三大核心痛点。
pscad IEEE标准系统搭建说明
pscad IEEE标准系统搭建说明，包含典型的IEEE 9节点、14节点、30节点、39节点和118节点系统。内含标准测试系统的原始数据和潮流结果。
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
ssm框架搭建
这个是一个在idea上成功跑起来的ssm框架项目，保存在这里方便以后使用直接下载
Devexpress16.2.6破解工具
Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具Devexpress16.2.6破解工具
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
365
扫一扫
