leetcode 733. Flood Fill

博客围绕图像填充问题展开,这是数据结构中图遍历的经典问题,属于BFS和DFS模板题。需判断起始像素颜色与要求颜色是否相同,不同则将相连非0颜色像素变为要求颜色。还给出了Python的BFS和DFS代码示例。

An image is represented by a 2-D array of integers, each integer representing the pixel value of the image (from 0 to 65535).
Given a coordinate (sr, sc) representing the starting pixel (row and column) of the flood fill, and a pixel value newColor, "flood fill" the image.

To perform a "flood fill", consider the starting pixel, plus any pixels connected 4-directionally to the starting pixel of the same color as the starting pixel, plus any pixels connected 4-directionally to those pixels (also with the same color as the starting pixel), and so on. Replace the color of all of the aforementioned pixels with the newColor.

At the end, return the modified image.

Example 1:

  • Input:
    image = [[1,1,1],[1,1,0],[1,0,1]]
    sr = 1, sc = 1, newColor = 2
    Output: [[2,2,2],[2,2,0],[2,0,1]]
  • Explanation:
    From the center of the image (with position (sr, sc) = (1, 1)), all pixels connected
    by a path of the same color as the starting pixel are colored with the new color.
    Note the bottom corner is not colored 2, because it is not 4-directionally connected
    to the starting pixel.

Note:

  • The length of image and image[0] will be in the range [1, 50].
  • T-he given starting pixel will satisfy 0 <= sr < image.length and 0 <= sc < image[0].length.
  • The value of each color in image[i][j] and newColor will be an integer in [0, 65535].

这个题是数据结构中的图的遍历的经典问题,是一个BFSDFS模板题,就是在给出的位置上判断颜色和要求的颜色是否不同。如果相通,直接返回就行,如果不同,就把它变为要求的颜色,并且把和它相连接的颜色(非0)全变为要求的颜色。

python代码(BFS):

class Solution:
    def floodFill(self, image: List[List[int]], sr: int, sc: int, newColor: int) -> List[List[int]]:
        lenr, lenc = len(image), len(image[0])
        color = image[sr][sc]
        dx = [1,-1,0,0]
        dy = [0,0,1,-1]
        if color == newColor:
            return image
        else:
            num = []
            num.append((sr, sc))
            image[sr][sc] = newColor
            while len(num):
                Q = num.pop(0)
                r, c = Q[0], Q[1]
                for i in range(4):
                    x, y = r + dx[i], c + dy[i]
                    if x >= 0 and x < lenr and y >= 0 and y < lenc and image[x][y] == color:
                        num.append((x, y))
                        image[x][y] = newColor
            return image

python代码(DFS):

class Solution:
    def floodFill(self, image: List[List[int]], sr: int, sc: int, newColor: int) -> List[List[int]]:
        lenr, lenc = len(image), len(image[0])
        color = image[sr][sc]
        if color == newColor:
            return image
        else:
            def dfs(r, c):
                if image[r][c] == color:
                    image[r][c] = newColor
                    if r >= 1: 
                        dfs(r-1, c)
                    if r + 1 < lenr: 
                        dfs(r+1, c)
                    if c >= 1: 
                        dfs(r, c-1)
                    if c + 1 < lenc: 
                        dfs(r, c+1)
            dfs(sr,sc)
            return image

最后

这个题中,可以用 a, b = c, d这个赋值,会很方便的,emmmmmmmmmm。

### 如何在 VSCode 中安装和配置 LeetCode 插件以及 Node.js 运行环境 #### 安装 LeetCode 插件 在 VSCode 的扩展市场中搜索 `leetcode`,找到官方提供的插件并点击 **Install** 按钮进行安装[^1]。如果已经安装过该插件,则无需重复操作。 #### 下载与安装 Node.js 由于 LeetCode 插件依赖于 Node.js 环境,因此需要下载并安装 Node.js。访问官方网站 https://nodejs.org/en/ 并选择适合当前系统的版本(推荐使用 LTS 版本)。按照向导完成安装流程后,需确认 Node.js 是否成功安装到系统环境中[^2]。 可以通过命令行运行以下代码来验证: ```bash node -v npm -v ``` 上述命令应返回对应的 Node.js 和 npm 的版本号。如果没有正常返回版本信息,则可能未正确配置环境变量。 #### 解决环境路径问题 即使完成了 Node.js 的安装,仍可能出现类似 “LeetCode extension needs Node.js installed in environment path” 或者 “command ‘leetcode.toggleLeetCodeCn’ not found” 的错误提示[^3]。这通常是因为 VSCode 未能识别全局的 Node.js 路径或者本地安装的 nvm 默认版本未被正确加载[^4]。 解决方法如下: 1. 手动指定 Node.js 可执行文件的位置 在 VSCode 设置界面中输入关键词 `leetcode`,定位至选项 **Node Path**,将其值设为实际的 Node.js 安装目录下的 `node.exe` 文件位置。例如:`C:\Program Files\nodejs\node.exe`。 2. 使用 NVM 用户管理工具调整默认版本 如果通过 nvm 工具切换了不同的 Node.js 版本,请确保设置了默认使用的版本号。可通过以下指令实现: ```bash nvm alias default <version> ``` 重新启动 VSCode 后测试功能键是否恢复正常工作状态。 --- #### 配置常用刷题语言 最后一步是在 VSCode 设置面板中的 LeetCode 插件部分定义个人习惯采用的主要编程语言作为默认提交方式之一。这样可以减少频繁修改编码风格的时间成本。 --- ### 总结 综上所述,要在 VSCode 上顺利启用 LeetCode 插件及其关联服务,除了基本插件本身外还需额外准备支持性的后台框架——即 Node.js 应用程序引擎;同时针对特定场景下产生的兼容性障碍采取针对性措施加以修正即可达成目标[^3]。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值