墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
100+累计阅读
76平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
分布式系统中，实现分布式锁是一项重要且常见的任务。在本文中，我们将探讨如何使用Redis和MySQL来实现分布式锁，并提供相应的源代码。
分布式锁的背景
在分布式系统中，多个节点同时访问共享资源时，可能会导致数据不一致或竞态条件的问题。为了避免这种情况，我们可以使用分布式锁来确保在某一时刻只有一个节点可以访问共享资源。
Redis实现分布式锁
Redis是一个内存中的数据结构存储系统，它提供了一种简单且高效的方式来实现分布式锁。
以下是使用Redis实现分布式锁的示例代码：
import redis
import time
# 连接Redis
redis_client = redis.Redis(host='localhost', port=63结构光三维重建2——多频外差解包裹
本文深入解析了结构光三维重建中的多频外差解包裹技术。针对四步相移法产生的相位包裹问题，该方法通过投影多组不同频率的条纹光，利用外差原理逐级解算，最终获得精确、连续的绝对相位值，是实现高精度、稳健三维重建的关键步骤。
【Linux】实际项目应该如何完成？--安防监控系统项目的总结
到目前为止我也做个5、6个嵌入式项目，但以往都是从零开始自己做，也就是毫无计划，想到那里做那里，有想法就会去实现，就这样导致我碰到了很多坑，也消耗了我许多时间，当然，不是说这样不好，因为在其中我也得到了一个很好的锻炼与练习，但是这不适用于在工作中去这样做。...
【实战】ComfyUI-Impact-Subpack插件安装与UltralyticsDetectorProvider节点修复全流程
本文详细解析了ComfyUI中UltralyticsDetectorProvider节点缺失的原因，并提供了完整的ComfyUI-Impact-Subpack插件安装与修复全流程。核心在于Impact Pack插件架构调整导致节点被拆分至子插件包。指南涵盖手动安装、依赖安全配置、模型文件管理及深度排错步骤，帮助用户彻底解决节点缺失问题，恢复工作流正常运行。
stm32学习笔记-启动文件
1、配置栈 Stack_Size EQU 0x00000400 AREA STACK, NOINIT, READWRITE, ALIGN=3 Stack_Mem SPACE Stack_Size __initial_sp EQU：相当于C中的define，定义Stack_Size = 0x00000400。 AREA: 指...
模拟IC版图DRC实战：手把手教你搞定MIM电容天线错误和ESD.10g违例
本文深入解析模拟IC版图中的MIM电容天线错误和ESD.10g违例问题，提供从错误解码到实战修复的完整指南。通过电路图修改、版图优化和验证闭环等步骤，帮助工程师高效解决DRC错误，特别适用于ADC等精密模拟电路设计。文章还分享了高级排错技巧和预防性设计策略，大幅提升流片成功率。
4、高级认证解决方案：Active Directory、LDAP、RADIUS和TACACS+深度解析
本文深入解析了多种高级认证解决方案，包括Active Directory、标准LDAP、RADIUS和TACACS+，涵盖其技术优势、配置步骤及适用场景。同时介绍了如何实现通用用户管理，包括使用第三方认证解决方案和ADSI自助用户管理。通过实际案例部署，展示了如何高效、安全地管理大规模用户认证与权限控制，为企业安全架构提供参考。
第7次CCF PTA编程培训师资认证-T1 真题解析(2024下)
B。
基于多传感器融合的智身四足机器狗楼梯环境SLAM系统设计与实现
本文设计了一种基于多传感器融合的四足机器狗楼梯环境SLAM系统。系统采用Jetson Orin NX为主控制器，集成RealSense D435i深度相机和Livox Mid360激光雷达，在ROS2框架下实现平面定位精度<5cm、楼梯环境下导航不漂移的目标。通过多层次传感器融合策略、运动学约束优化和状态切换机制，解决了楼梯环境下的定位累积误差问题，实现了平面与楼梯环境的自动识别切换及精度复位功能。硬件设计注重传感器布局优化和精确标定，软件架构采用分层设计，确保实时性能。该系统为四足机器人在复杂地形中
精雕软件(JDpaint) 5.5 绿色版
精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
IEM模型，地表粗糙度模拟
利用微波反演土壤水分时候，利用IEM模型可以实现对随机地表的模拟
Statistics and Machine Learning Toolbox
Statistics and Machine Learning Toolbox（带书签），MATLAB统计学习工具
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
351
扫一扫
