Something about IPv6

   

0. First of all,there is the best site that will show U the IPV4 will be exhausted:
  http://www.potaroo.net/tools/ipv4/

1.        For the current list of permanently assigned Ipv6 multicast addresses,see :

http://www.iana.org/assignments/ipv6-multicast-addresses

2.       We can obtain these RFCs from:

http://www.ietf.org/rfc.html

3.       For the most current list of the reserved values for the Ipv4 Protocol and Ipv6 Next Header fields,see: http://www.iana.org/assignments/protocol-numbers

4.       The Microsoft Windows IPV6 Web site is:
http://technet.microsoft.com/zh-cn/network/bb530961(en-us).aspx

5.       The doc will tell you that  the Ipv4 will  be exhausted :

     http://www.cisco.com/web/about/ac123/ac147/archived_issues/ipj_8-3/ipj_8-3.pdf

root@prplOS:/# ./etc/init.d/bcmenet /etc/rc.common: local: line 904: not in a function root@prplOS:/# ./etc/init.d/bcmenet start /sbin/getfirm: local: line 67: not in a function insmod: can't insert '/lib/modules/4.19.294/extra/bcmflex.ko': Invalid argument insmod: can't insert '/lib/modules/4.19.294/extra/bcmspu.ko': Invalid argument insmod: can't insert '/lib/modules/*/kernel/net/ipv4/udp_tunnel.ko': No such file or directory insmod: can't insert '/lib/modules/*/kernel/net/ipv6/ip6_udp_tunnel.ko': No such file or directory insmod: can't insert '/lib/modules/*/kernel/net/ipv4/ip_tunnel.ko': No such file or directory ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. ########## getifname of unit 0 port 0 fail, maybe something wrong ####### ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. ########## getifname of unit 0 port 5 fail, maybe something wrong ####### ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. ########## getifname of unit 0 port 6 fail, maybe something wrong ####### ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. ########## getifname of unit 0 port 8 fail, maybe something wrong ####### ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. ########## getifname of unit 0 port 7 fail, maybe something wrong ####### ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. ########## getifname of unit 0 port 10 fail, maybe something wrong ####### ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. ########## getifname of unit 0 port 9 fail, maybe something wrong ####### uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found uci: Entry not found sh: on: unknown operand sh: on: unknown operand LAN ifs: "eth4_0 eth3_0 eth6_0 eth5_0 eth1_0 eth0_0" Internet ifs: "eth4_0 eth3_0 eth6_0 eth5_0 eth1_0 eth0_0" IPTV ifs: "" IP-Phone ifs: "" Bridge ifs: "" ioctl failed. check if eth0_0 exists : Phy power <up|down>/status ethctl <interface> phy-power [<up|down>] [port <sub_port#>] [port <sub_port#>]: required if <interface> has Crossbar or Trunk port underneath ioctl failed. check if eth1_0 exists : Phy power <up|down>/status ethctl <interface> phy-power [<up|down>] [port <sub_port#>] [port <sub_port#>]: required if <interface> has Crossbar or Trunk port underneath ioctl failed. check if eth4_0 exists : Phy power <up|down>/status ethctl <interface> phy-power [<up|down>] [port <sub_port#>] [port <sub_port#>]: required if <interface> has Crossbar or Trunk port underneath ioctl failed. check if eth3_0 exists : Phy power <up|down>/status ethctl <interface> phy-power [<up|down>] [port <sub_port#>] [port <sub_port#>]: required if <interface> has Crossbar or Trunk port underneath ioctl failed. check if eth6_0 exists : Phy power <up|down>/status ethctl <interface> phy-power [<up|down>] [port <sub_port#>] [port <sub_port#>]: required if <interface> has Crossbar or Trunk port underneath ioctl failed. check if eth5_0 exists : Phy power <up|down>/status ethctl <interface> phy-power [<up|down>] [port <sub_port#>] [port <sub_port#>]: required if <interface> has Crossbar or Trunk port underneath ioctl failed. check if eth2_0 exists : Phy power <up|down>/status ethctl <interface> phy-power [<up|down>] [port <sub_port#>] [port <sub_port#>]: required if <interface> has Crossbar or Trunk port underneath switch ports is linked down! ethswctl_init: neither bcmsw nor eth0 exist ethswctl_init failed. Failure ##### power down all ports ##### uci: Entry not found /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function /sbin/getfirm: local: line 67: not in a function /sbin/network_get_firm: local: line 46: not in a function uci: Entry not found uci: Invalid argument uci: Entry not found uci: Entry not found bcmenet Initialize done... root@prplOS:/# insmod /lib/modules/*/extra/bcmspu.ko insmod: can't insert '/lib/modules/4.19.294/extra/bcmspu.ko': Invalid argument root@prplOS:/# root@prplOS:/# ls /lib/modules/*/extra/bcmspu.ko /lib/modules/4.19.294/extra/bcmspu.ko 更新busybox后出现insmod不上的问题 请提供排查思路
最新发布
12-03
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值