An introduction to the /etc/init.d directory-优快云博客

本文介绍了Linux系统中init.d目录的作用及其内部结构。该目录包含了用于启动和停止系统服务的各种脚本，通过这些脚本可以方便地管理各种服务。文章还提到了如何手动控制这些脚本，并解释了/etc/rc.local文件的用途。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

If you use Linux you most likely have heard of the init.d directory. But what exactly does this directory do? It ultimately does one thing but it does that one thing for your entire system, so init.d is very important. The init.d directory contains a number of start/stop scripts for various services on your system. Everything from acpid to x11-common is controlled from this directory. Of course it's not exactly that simple.

If you look at the /etc directory you will find directories that are in the form rc#.d (Where # is a number reflects a specific initialization level - from 0 to 6). Within each of these directories is a number of other scripts that control processes. These scripts will either begin with a "K" or an "S". All "K" scripts are run before "S" scripts. And depending upon where the scripts are located will determine when the scripts initiate. Between the directories the system services work together like a well-oiled machine. But there are times when you need to start or stop a process cleanly and without using the kill or killall commands. That is where the /etc/init.d directory comes in handy.

In order to control any of the scripts in init.d manually you have to have root (or sudo) access. Each script will be run as a command and the structure of the command will look like: /etc/init.d/command OPTION . Where command is the actual command to run and OPTION can be one of the following:

start
stop
reload
restart
force-reload

Most often you will use either start, stop, or restart. So if you want to stop your network you can issue the command: /etc/init.d/networking stop . Or if you make a change to your network and need to restart it, you could do so with the following command: /etc/init.d/networking restart .

About /etc/rc.local script. This file runs after all other init level scripts have run, so it's safe to put various commands that you want to have issued upon startup.

转自：https://www.ghacks.net/2009/04/04/get-to-know-linux-the-etcinitd-directory/