List分页

list分页 处理几万条数据的 List 分页,关键在于平衡​​、​​和​​。下面我用一个表格为你总结几种主流方法的优缺点,帮你快速决策:方法优点缺点适用场景​subList()​​​ (返回原列表视图,不创建新集合)分页结果与原列表​​,原列表修改会影响分页结果需要​​、且能接受分页结果与源数据联动的大数据量分页​​​​,代码简洁,可与流操作链式组合会​​,有一定内存开销适合在分页​​(如过滤、映射)的场景​​代码简洁,一次分块可多次取页,​​,数据隔离性好需引入依赖需要​。 阅读详情
/**
 * list分页
 * @param dataList
 * @param currentPage
 * @param pageSize
 * @return
 */
private static List startPage(List<String> dataList, int currentPage, int pageSize) {
    List<String> currentPageList = new ArrayList<>();
    if (dataList != null && dataList.size() > 0) {
        int currIdx = (currentPage > 1 ? (currentPage - 1) * pageSize : 0);
        for (int i = 0; i < pageSize && i < dataList.size() - currIdx; i++) {
            String data = dataList.get(currIdx+i);
            currentPageList.add(data);
        }
    }
    return currentPageList;
}
PCB过孔全介绍 过孔(via)是多层PCB的重要组成部分之一,钻孔的费用通常占PCB制板费用的30%到40%。简单的说来,PCB上的每一个孔都可以称之为过孔。从作用上看,过孔可以分成两类:一是用作各层间的电气连接;二是用作器件的固定或定位。如果从工艺制程上来说,这些过孔一般又分为三类,即盲孔(blind via)、埋孔(buried via)和通孔(through via)。盲孔位于印刷线路板的顶层和底层表面,具 阅读详情

相关推荐

【ubuntu】如何搭建AFTR+B4环境

为何要使用ipv6 目前ipv4地址已经不够用了,而IPv6采用128位地址长度,几乎可以不受限制地提供地址。而且ipv6具有更高的安全性。 主流的ipv6方案 1.双栈方案 :所有设备同时支持IPv4/IPv6协议栈,核心理念在于其传送网同时支持IPv4和IPv6 2.DS-Lite方案 :IPv4‐in‐IPv6 隧道和 NAT 这两个基本技术,同时支持IPV4与IPV6,对于ipv4用户,可以通过ipv6隧道与ipv4业务平台实现通信;针对ipv6用户,可直接通过ipv6网络通信。 3.6RD方案 :

weixin_43863426的博客 2726

list集合分页list分页

public static List<VresourcePolice> getPaginationListVresourcePolice(List<VresourcePolice> list,int start,int end){ List<VresourcePolice> resultList =new ArrayList<>(); fo...

gaston的博客 1315

RAG-Anything 实战:构建企业级多模态知识图谱问答系统

本文详细介绍了如何利用RAG-Anything构建企业级多模态知识图谱问答系统,解决跨模态文档处理的痛点。通过架构设计解析、部署实战指南和典型业务场景解决方案,帮助企业实现高效的知识管理和智能检索,提升决策效率。

weixin_29089057的博客 386

将List进行分页

将List进行分页前言将List进行分页控制台输出 前言 最近决定将工作中遇到的一部分问题的解决方案更新到博客中 将List进行分页 这是一个简单的将List中的数据进行分页处理截取需要得到的部分数据 import io.swagger.annotations.Api; import java.util.LinkedList; import java.util.List; /** * @A...

qq_42545382的博客 3672

使用ExcelJS向XLSX单元格居中插入图片

本文记录了使用ExcelJS库向XLSX单元格里居中写入图片的方法。本文内容包括:xlsx 文件格式;xlsx 图片定位的长度单位;使用nativeColOff和nativeRowOff进行定位,不要使用官网给的定位方式;添加图片到数据表的总体流程和样例代码;注意事项等。

weixin_43678000的博客 3459

从零到一:QT for OpenHarmony 开发环境实战搭建与踩坑指南

本文是一份详尽的QT for OpenHarmony开发环境搭建实战指南。文章手把手教你如何在Windows和macOS系统上,从环境准备、核心工具(DevEco Studio与社区版QT SDK)安装配置,到创建首个QT Quick项目、解决构建部署中的常见问题,最终实现应用在OpenHarmony设备上运行。内容涵盖关键配置修改、资源管理及深度踩坑经验,旨在帮助开发者高效开启跨平台开发之旅。

weixin_29190573的博客 328

pageHelper 对list分页

@RequestMapping(value="/{pageNum}/{pageSize}", method=RequestMethod.GET public ResponseEntity<PageInfo<TestVO>> testget(@PathVariable("pageNum") int pageNum, @PathVariable...

badboyh2o的博客 565

ArcGis布局视图中Excel表格无边框插入与图例符号边框定制技巧

本文详细解析了在ArcGis布局视图中实现Excel表格无边框插入与图例符号边框定制的专业技巧。通过源头净化Excel表格、精准粘贴以及分解图例并单独设置边框属性,有效解决了地图报告中常见的视觉粗糙问题,帮助用户提升专题图与报告的精致度与专业感。

weixin_29292535的博客 306

Java对list进行分页,subList()方法实现分页

修正版 /** * 自定义List分页工具 * * @author ellen * @version 1.0 * @date 2019/1/11 */ public class PageUtil { /** * 开始分页 * * @param list * @param pageNum 页码 * @param pageS...

一条吃软饭的软狗 1万+

Plant Simulation与ABB机器人虚实结合

Plant Simulation与ABB机器人虚实结合

santayana的专栏 1870

【Python机器学习】零基础掌握RFECV特征选择

通过应用算法,有效地识别了影响购买意愿的关键特征(浏览时长和点击数)和历史货币流通的主要因素(年代、人口和货币流通量)。这样的特征选择不仅提高了模型的解释能力,还可能用于电商推荐系统和历史研究的优化。优点总结,这种方法可以高效地找出对目标变量有最大影响的特征,进而可以用于各种实际应用场景,如电商推荐和历史研究。优点名称对应描述说明高解释性易于理解哪些特征最为重要泛化性能强通过交叉验证提高模型的稳健性应用场景多样可用于电商、金融、历史研究等多个领域。

Mr数据杨 2001

list实现PageInfo方式手动分页

项目中有时候遇到list多种来源,不能使用PageInfo在查询数据库时分页,需要查询全部之后,手动分页。 //list自定义排序 ComparatorUser comparator=new ComparatorUser(); Collections.sort(list, comparator); //list分页开始 int fromIndex = 0; int toIndex = 0...

第245万个博主 9042

汇川Easy系列PID_AT指令弹簧质量阻尼系统闭环控制仿真测试

汇川Easy系列PLC系统PID指令(温度控制PID应用编程)

RXXW_Dor的博客 767

list 分页_两种List集合分页方式

平凡也就两个字: 懒和惰;成功也就两个字: 苦和勤;优秀也就两个字: 你和我。跟着我从0学习JAVA、spring全家桶和linux运维等知识,带你从懵懂少年走向人生巅峰,迎娶白富美!每一篇文章都是心得总结,跟我学习你就是大牛!两种List集合分页方式 工作中我们有时会遇到这种情况:我们需要保存一批List集合数据到数据库,但是由于list集合中的数据较多,可能会占用较大数据库内...

weixin_39795419的博客 9466

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

精雕软件(JDpaint) 5.5 绿色版

精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版精雕软件(JDpaint) 5.5 绿色版

List集合数据进行分页展示

System.out.println("总页数:" + ((list.size() / pageSize) + 1));System.out.println("每页个数:" + queryPageInfo.getPageSize());System.out.println("当前页:" + queryPageInfo.getPageNum());System.out.println("总条数:" + list.size());System.out.println("每页个数:" + pageSize);

m0_67561379的博客 1681

廖雪峰Python教程[完整版]

廖雪峰的python教程整理的,已经排好版了,而且还是完整的,适合小白

java list实现分页_Java实现手动对list集合进行分页

@date 2018/6/6 14:53*/public class Paging {private Integer totalNum;//总条数private Integer totalPage;//总页数private Integer pageSize;//每页条数private Integer pageIndex;//当前页码private Integer queryIndex;//当前页从...

weixin_33940469的博客 1113

WINCC7.3破解文件

WINCC7.3硬件够破解文件,有需要的下载!WINCC7.3硬件够破解文件,有需要的下载!

List集合的分页

把需要分页的数据,用list集合封装好,然后进行分页,分页的方法如下: package com.coolma.admin.util; import java.util.ArrayList; import java.util.List; /** * @ClassName ListPaging * @Decription List集合分页方法 * @AUTHOR dingguoxu...

qq_40948117的博客 1965

PageHelper对List进行分页的方法

PageHelper的分页 PageHelper.startPage(pageNum,pageSize); 他是对之后的数据库查询语句才起作用,然后如果我用list处理了之后,数据减少了就不会有错误,比如获取第1页显示10条的数据,最终可能页面只显示5条。 而我的项目需求中就有要对list进行分页的。 下面我用一个自己写的分页来直接对list进行分页: //创建Page类 Page page1 = new Page(page, limit); //为Pa

小四是个程序猿的博客 5997

Java 集合分页 Java List集合分页 List 分页 Java List集合笛卡尔积

在Java开发中,若单次展示的数据量太大,会造成程序响应缓慢,就需要用到分页功能,每一页展示一定量的数据,分多次展示...那么在List集合中,如何实现分页功能呢?本文将以3种方式,分别是。......

HaHa_Sir的博客 9566

java8 list 分页,获取 分页后的 list 和 总页数 的 工具类

java8 list 分页,获取 分页后的 list 和 总页数 的 工具类

12程序猿的博客 679

java:List集合分页处理的方法

第一种方法是循环截取某个页面的数据: /** * 循环截取某页列表进行分页 * @param dataList 分页数据 * @param pageSize 页面大小 * @param currentPage 当前页面 */ public static List&lt;String&gt; page(List&lt;Str...

不花的花和尚的博客 3795

java list分页_java中利用List的subList方法实现对List分页(简单易学)

以下是介绍利用list的sublist方法实现对list分页,废话不多说了,直接看代码把/** *//*** list分页* 实现:利用list的获取子list方法,实现对list的分页* @author 显武* @date 2010-1-8 16:27:31**/import java.util.arraylist;import java.util.list;public class pagem...

weixin_39995439的博客 930

Java手工对List进行分页

Java手工对List进行分页 import cn.hutool.core.collection.CollUtil; ​ import java.util.Collections; import java.util.List; ​ /** * 自定义List分页工具 * * @author hanwl */ public class PageUtil { ​ /** * 开始分页 * * @param list * @param pageNo ...

li_tiantian的博客 848

java对List进行分页

java对List进行分页

weixin_46263334的博客 1815

如何对list进行分页?

对list进行分页: 方法一(自定义泛型): //对list进行分页 public List<CompanyHistory> startPage(List<CompanyHistory> list, Integer pageNum, Integer pageSize) { if (list == null) { return null; } if (list.size

weixin_41569735的博客 1231

记PageHelper分页后对list操作导致分页无效

PageHelper分页后对list集合操作1.问题2.原因3.解决方案 1.问题 @Override public PageInfo<HdQueryVo> getRecordsByView(int pageNo, int pageSize) { PageHelper.startPage(pageNo,pageSize); List<HdQ...

Ron_的博客 1万+
上一篇: docker容器时间与宿主机时间不一致的问题; 
评论 1
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值