Release file for xxx is not valid yet (invalid for another 48min 42s)

在尝试使用Dockerfile进行构建时遇到了错误,具体是由于Apt的Release文件未验证通过,因为系统时间比阿里云镜像服务器的时间滞后。解决方法是校准系统时间。Dockerfile中包含了从阿里云镜像源更新并安装软件包的步骤。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

1. 错误日志

Release file for http://mirrors.aliyun.com/debian/dists/buster-backports/InRelease is not valid yet (invalid for another 48min 42s). Updates for this repository will not be applied.

2. 详细日志

[root@harbor csi-driver-nfs]# make local-build-push
/bin/cp -f /root/go/bin/dlv ./bin/amd64/
docker build --build-arg ARCH="amd64" -t 192.168.11.20/csi/nfsplugin:latest .
[+] Building 5.3s (7/9)                                                                                                                                       docker:default
 => [internal] load build definition from Dockerfile                                                                                                                    0.0s
 => => transferring dockerfile: 1.73kB                                                                                                                                  0.0s
 => [internal] load .dockerignore                                                                                                                                       0.0s
 => => transferring context: 2B                                                                                                                                         0.0s
 => [internal] load metadata for m.daocloud.io/registry.k8s.io/build-image/debian-base:bullseye-v1.4.3                                                                  0.3s
 => [1/5] FROM m.daocloud.io/registry.k8s.io/build-image/debian-base:bullseye-v1.4.3@sha256:3fcf9bcc4949392155cde1f96591ba3eda092f4735a9cc856bf526d71f48af47            0.0s
 => [internal] load build context                                                                                                                                       0.1s
 => => transferring context: 18.09MB                                                                                                                                    0.1s
 => CACHED [2/5] RUN echo 'deb http://mirrors.aliyun.com/debian/ buster main non-free contrib\ndeb-src http://mirrors.aliyun.com/debian/ buster main non-free contrib\  0.0s
 => ERROR [3/5] RUN apt update && apt upgrade -y && apt-mark unhold libcap2 && clean-install ca-certificates mount nfs-common netbase                                   5.0s
------                                                                                                                                                                       
 > [3/5] RUN apt update && apt upgrade -y && apt-mark unhold libcap2 && clean-install ca-certificates mount nfs-common netbase:                                              
0.109                                                                                                                                                                        
0.109 WARNING: apt does not have a stable CLI interface. Use with caution in scripts.                                                                                        
0.109                                                                                                                                                                        
2.391 Get:1 http://mirrors.aliyun.com/debian buster InRelease [122 kB]                                                                                                       
2.418 Get:2 http://mirrors.aliyun.com/debian-security buster/updates InRelease [34.8 kB]
2.430 Get:3 http://mirrors.aliyun.com/debian buster-updates InRelease [56.6 kB]
2.441 Get:4 http://mirrors.aliyun.com/debian buster-backports InRelease [51.4 kB]
2.480 Get:5 http://mirrors.aliyun.com/debian buster/non-free Sources [85.9 kB]
2.503 Get:6 http://mirrors.aliyun.com/debian buster/contrib Sources [42.5 kB]
2.507 Get:7 http://mirrors.aliyun.com/debian buster/main Sources [7852 kB]
3.225 Get:8 http://mirrors.aliyun.com/debian buster/non-free amd64 Packages [87.8 kB]
3.233 Get:9 http://mirrors.aliyun.com/debian buster/main amd64 Packages [7909 kB]
3.962 Get:10 http://mirrors.aliyun.com/debian buster/contrib amd64 Packages [50.1 kB]
3.971 Get:11 http://mirrors.aliyun.com/debian-security buster/updates/main Sources [411 kB]
4.009 Get:12 http://mirrors.aliyun.com/debian-security buster/updates/main amd64 Packages [541 kB]
4.054 Get:13 http://mirrors.aliyun.com/debian buster-updates/main Sources [4616 B]
4.055 Get:14 http://mirrors.aliyun.com/debian buster-updates/main amd64 Packages [8788 B]
4.652 Reading package lists...
4.930 E: Release file for http://mirrors.aliyun.com/debian/dists/buster-backports/InRelease is not valid yet (invalid for another 48min 42s). Updates for this repository will not be applied.
------
Dockerfile:27
--------------------
  25 |     ' > /etc/apt/sources.list 
  26 |     
  27 | >>> RUN apt update && apt upgrade -y && apt-mark unhold libcap2 && clean-install ca-certificates mount nfs-common netbase
  28 |     
  29 |     ARG ARCH
--------------------
ERROR: failed to solve: process "/bin/sh -c apt update && apt upgrade -y && apt-mark unhold libcap2 && clean-install ca-certificates mount nfs-common netbase" did not complete successfully: exit code: 100
make: *** [local-build-push] Error 1
[root@harbor csi-driver-nfs]# 

3. Dockerfile

# Copyright 2020 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

FROM m.daocloud.io/registry.k8s.io/build-image/debian-base:bullseye-v1.4.3

RUN echo 'deb http://mirrors.aliyun.com/debian/ buster main non-free contrib\n\
deb-src http://mirrors.aliyun.com/debian/ buster main non-free contrib\n\
deb http://mirrors.aliyun.com/debian-security buster/updates main\n\
deb-src http://mirrors.aliyun.com/debian-security buster/updates main\n\
deb http://mirrors.aliyun.com/debian/ buster-updates main non-free contrib\n\
deb-src http://mirrors.aliyun.com/debian/ buster-updates main non-free contrib\n\
deb http://mirrors.aliyun.com/debian/ buster-backports main non-free contrib\n\
deb-src http://mirrors.aliyun.com/debian/ buster-backports main non-free contrib\n\
' > /etc/apt/sources.list

RUN apt update && apt upgrade -y && apt-mark unhold libcap2 && clean-install ca-certificates mount nfs-common netbase

ARG ARCH
ARG binary=./bin/${ARCH}/nfsplugin
COPY ${binary} /nfsplugin
COPY ./bin/${ARCH}/dlv /usr/local/bin/dlv
# COPY /root/go/bin/dlv /usr/local/bin/dlv

ENTRYPOINT ["dlv --listen=:12800 --headless=true --api-version=2 --accept-multiclient exec /nfsplugin -- "]

4. 解决方案

通过网上搜索以及日志对比,发现是因为虚拟机重启之后,时间滞后导致的。校准时间之后,可以解决此问题。

<think>好的,我现在需要解决用户遇到的Ubuntu apt update时出现的“Release file is not valid yet”错误。根据用户提供的引用信息,我需要先分析问题原因,再提出解决方案。 首先,用户提到错误信息显示时间无效,比如引用[1]中的错误信息提到“invalid for another 13h 54min 24s”,这说明系统时间和源服务器的时间不同步。根据引用[5],用户执行date命令显示的时间是UTC时间2022年1月13日,而源服务器的时间可能更晚,导致系统认为证书尚未生效。因此,时间不同步是主要原因之一。 接下来,用户可能使用的是内网源,如引用[2]所述,内网镜像源可能存在同步延迟。如果内网镜像没有及时同步官方源的元数据,就会导致本地系统无法获取有效的Release文件。 解决方法方面,首先需要检查系统时间是否正确。可以通过date命令查看,如果发现时间偏差,使用ntpdate或timedatectl命令同步网络时间。例如,安装ntpdate后运行sudo ntpdate ntp.ubuntu.com,然后再次尝试更新。 如果时间正确,问题可能出在内网源的同步上。用户需要联系内网源的管理员,确认镜像是否及时同步,或者临时切换回官方源进行测试。此外,清除apt缓存也是一个步骤,使用sudo apt clean和sudo rm -rf /var/lib/apt/lists/*,再执行sudo apt update。 另外,引用[3]和[4]提到社区中类似的解决方案,比如检查时区设置、确保NTP服务正常运行。如果用户是在Docker容器中遇到此问题,可能需要检查宿主机的系统时间,或者重建容器。 总结步骤应为:检查时间→同步时间→更换源→清除缓存。同时需要根据用户的具体环境调整,比如内网情况下可能需要手动同步时间或联系管理员处理镜像源的问题。</think>### 分步解决方案 Ubuntu执行`apt update`时出现`Release file is not valid yet`错误,通常由**系统时间与软件源服务器时间不同步**或**内网镜像源未及时同步**导致。以下是具体解决步骤: --- #### **1. 检查并同步系统时间** 系统时间错误是此问题的常见原因。 - **查看当前时间**: ```bash date ``` 若时间与真实时间偏差较大(如相差几小时甚至几年),需同步时间[^1][^5]。 - **同步网络时间**: - 安装时间同步工具(若未安装): ```bash sudo apt install ntpdate ``` - 手动同步时间: ```bash sudo ntpdate ntp.ubuntu.com # 使用Ubuntu官方时间服务器 ``` - 或使用`timedatectl`(适用于systemd系统): ```bash sudo timedatectl set-ntp on # 启用自动时间同步 ``` --- #### **2. 检查软件源状态** 若时间正确但问题仍存在,可能是**软件源未及时同步**(尤其内网镜像源)。 - **临时切换官方源测试**: 编辑源列表文件: ```bash sudo nano /etc/apt/sources.list ``` 注释内网源,替换为官方源(示例为Ubuntu 20.04): ``` deb http://archive.ubuntu.com/ubuntu/ focal main restricted deb http://security.ubuntu.com/ubuntu/ focal-security main restricted ``` 更新并验证: ```bash sudo apt clean && sudo apt update ``` 若问题消失,说明内网镜像源需更新[^2]。 - **联系内网源管理员**: 若必须使用内网源,需确保镜像与官方源保持同步频率。 --- #### **3. 清除APT缓存** 过时的缓存可能导致时间校验失败: ```bash sudo apt clean # 清理已下载的包文件 sudo rm -rf /var/lib/apt/lists/* # 删除元数据缓存 sudo apt update # 重新生成缓存 ``` --- #### **4. 特殊情况处理** - **Docker容器内报错**: 检查宿主机时间是否准确,或重建容器[^4]。 - **硬件时钟问题**: 若重启后时间重置,检查主板电池或硬件时钟设置: ```bash sudo hwclock --show # 查看硬件时钟时间 ``` --- ### 总结流程图 ``` 系统时间错误? → 同步时间 → 成功 → 问题解决 ↓ 否 ↓ 内网源未同步? → 切换官方源测试 → 成功 → 更新内网镜像 ↓ 否 ↓ 清除APT缓存 → 问题解决 ```
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值